Date: Thu, 9 Oct 2003 13:09:01 +0800 From: "Edwet" <elpiojo@globaldial.com> To: <freebsd-questions@freebsd.org> Subject: dial ppp problem Message-ID: <001301c38e23$743cff60$0200a8c0@elpiojo>
next in thread | raw e-mail | index | archive | help
I'm a newbie I would like to for support to freebsd experts around the =
world, about my ppp problem
I've got 2 computers:
1. Installed with freebsd 5.1 plus 1 external modem dynalink (33.6) , IP =
address 192.168.0.1
2. Installed with windows XP, IP address 192.168.0.2
the network with this 2 computers doesn't have any problem since I can =
ping both machines.
everytime I execute the ppp command from the freebsd the modem will dial =
my ISP number however after dialling sequence and authentication, I =
still can't get to the net (ping, traceroute or whatever), I've been =
doing a lot of reseach in the net (google.com/bsd ; freebsd.org ; =
defcon1.org ; freebsddiarries ; etc) about my problem but probably I =
miss some important URLs if you guys can enlighten me I would be =
grateful.=20
here's the log from the freebsd box
Log modem
-------------------
Working in interactive mode
Using interface: tun0
ppp ON jester> term
deflink: Entering terminal mode on /dev/cuaa0
Type `~?' for help
atdt92238000
CARRIER 31200
PROTOCOL: LAP-M
COMPRESSION: V.42BIS
CONNECT 38400
User Access Verification
login: ----
Password:
Entering PPP mode.
Async interface address is unnumbered (FastEthernet0)
Your IP address is 202.74.163.135. MTU is 1500 bytes
Header compression is on.
ppp ON jester>
PPp ON jester> Warning: ff02:4::/32: Change route failed: errno: Network =
is unreachable
PPP ON jester>
This morning I've tried to dial again i've got this error message from =
ppp
PPP ON jester> Oct 9 10:39:26 jester routed[229]: IP_ADD_MEMBERSHIP =
ALLHOSTS: Can't assign requested address
Oct 9 10:39:26 jester routed[229]: setsopckopt(IP_ADD_MEMBERSHIP RIP): =
Can't assign requested address
Oct 9 10:39:26 jester routed[229]: ignore RTM_CHANGE without mask
ppp ON jester> Oct 9 10:43:51 jester routed[229]: ignore RTM_CHANGE =
without mask
ppp ON jester> Oct 9 10:43:51 jester routed[229]: interface tun0 to =
202.74.164.5 turned off
ppp.log
-----------------
Oct 8 17:11:53 jester ppp[577]: tun0: Command: /dev/ttyp0: term
Oct 8 17:11:53 jester ppp[577]: tun0: Phase: bundle: Establish
Oct 8 17:11:53 jester ppp[577]: tun0: Phase: deflink: closed -> opening
Oct 8 17:11:53 jester ppp[577]: tun0: Phase: deflink: Connected!
Oct 8 17:11:53 jester ppp[577]: tun0: Phase: deflink: opening -> =
carrier
Oct 8 17:11:54 jester ppp[577]: tun0: Phase: deflink: /dev/cuaa0 =
doesn't support CD
Oct 8 17:11:54 jester ppp[577]: tun0: Phase: deflink: carrier -> ready
Oct 8 17:12:36 jester ppp[577]: tun0: Phase: deflink: PPP packet =
detected, coming up
Oct 8 17:12:36 jester ppp[577]: tun0: Phase: deflink: ready -> carrier
Oct 8 17:12:36 jester ppp[577]: tun0: Phase: deflink: carrier -> lcp
Oct 8 17:12:36 jester ppp[577]: tun0: LCP: FSM: Using "deflink" as a =
transport
Oct 8 17:12:36 jester ppp[577]: tun0: LCP: deflink: State change =
Initial --> Closed
Oct 8 17:12:36 jester ppp[577]: tun0: LCP: deflink: State change Closed =
--> Stopped
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: deflink: LayerStart
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: deflink: SendConfigReq(1) =
state =3D Stopped
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: ACFCOMP[2]
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: PROTOCOMP[2]
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: ACCMAP[6] 0x00000000
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: MRU[4] 1500
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: MAGICNUM[6] 0xbf3a62ae
Oct 8 17:12:37 jester ppp[577]: tun0: LCP: deflink: State change =
Stopped --> Req-Sent
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: RecvConfigAck(1) =
state =3D Req-Sent
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: ACFCOMP[2]
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: PROTOCOMP[2]
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: ACCMAP[6] 0x00000000
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: MRU[4] 1500
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: MAGICNUM[6] 0xbf3a62ae
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: State change =
Req-Sent --> Ack-Rcvd
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: RecvConfigReq(118) =
state =3D Ack-Rcvd
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: ACCMAP[6] 0x000a0000
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: MAGICNUM[6] 0xc81b4317
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: PROTOCOMP[2]
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: ACFCOMP[2]
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: SendConfigAck(118) =
state =3D Ack-Rcvd
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: ACCMAP[6] 0x000a0000
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: MAGICNUM[6] 0xc81b4317
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: PROTOCOMP[2]
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: ACFCOMP[2]
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: State change =
Ack-Rcvd --> Opened
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: LayerUp
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: deflink: SendIdent(0) state =
=3D Opened
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: MAGICNUM bf3a62ae
Oct 8 17:12:38 jester ppp[577]: tun0: LCP: TEXT user-ppp 3.1 (built =
Jun 5 2003)
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: FSM: Using "deflink" as a =
transport
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: deflink: State change =
Initial --> Closed
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: deflink: LayerStart.
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: MPPE: Not usable without =
CHAP81
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: deflink: SendConfigReq(1) =
state =3D Closed
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: DEFLATE[4] win 15
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: PRED1[2]
Oct 8 17:12:38 jester ppp[577]: tun0: CCP: deflink: State change Closed =
--> Req-Sent
Oct 8 17:12:38 jester ppp[577]: tun0: Phase: deflink: lcp -> open
Oct 8 17:12:38 jester ppp[577]: tun0: Phase: bundle: Network
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: FSM: Using "deflink" as a =
transport
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: deflink: State change =
Initial --> Closed
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: deflink: LayerStart.
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: deflink: SendConfigReq(1) =
state =3D Closed
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: IPADDR[6] 192.168.0.1
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: COMPPROTO[6] 16 VJ slots =
with slot compression
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: PRIDNS[6] 202.74.164.33
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: SECDNS[6] 255.255.255.255
Oct 8 17:12:38 jester ppp[577]: tun0: IPCP: deflink: State change =
Closed --> Req-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: RecvConfigReq(196) =
state =3D Req-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: COMPPROTO[6] 16 VJ slots =
without slot compression
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: IPADDR[6] 202.74.164.8
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: SendConfigAck(196) =
state =3D Req-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: COMPPROTO[6] 16 VJ slots =
without slot compression
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: IPADDR[6] 202.74.164.8
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: State change =
Req-Sent --> Ack-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(119) state =3D Opened
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x80fd =
(Compression Control Protocol) was rejected!
Oct 8 17:12:39 jester ppp[577]: tun0: CCP: deflink: State change =
Req-Sent --> Stopped
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: RecvConfigNak(1) =
state =3D Ack-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: IPADDR[6] 202.74.163.135
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: IPADDR[6] changing =
address: 192.168.0.1 --> 202.74.163.135
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: PRIDNS[6] 202.74.164.3
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: SECDNS[6] 202.74.164.33
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: Primary nameserver set to =
202.74.164.3
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: Secondary nameserver set to =
202.74.164.33
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: SendConfigReq(2) =
state =3D Ack-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: IPADDR[6] 202.74.163.135
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: COMPPROTO[6] 16 VJ slots =
with slot compression
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: PRIDNS[6] 202.74.164.3
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: SECDNS[6] 202.74.164.33
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(120) state =3D Opened
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:39 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: RecvConfigAck(2) =
state =3D Ack-Sent
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: IPADDR[6] 202.74.163.135
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: COMPPROTO[6] 16 VJ slots =
with slot compression
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: PRIDNS[6] 202.74.164.3
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: SECDNS[6] 202.74.164.33
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: State change =
Ack-Sent --> Opened
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: deflink: LayerUp.
Oct 8 17:12:39 jester ppp[577]: tun0: IPCP: myaddr 202.74.163.135 =
hisaddr =3D 202.74.164.8
Oct 8 17:12:39 jester ppp[577]: tun0: Warning: ff02:4::/32: Change =
route failed: errno: Network is unreachable
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(121) state =3D Opened
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:39 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Oct 8 17:12:42 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(122) state =3D Opened
Oct 8 17:12:42 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(121) state =3D Opened
Oct 8 17:12:39 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:39 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Oct 8 17:12:42 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(122) state =3D Opened
Oct 8 17:12:42 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:42 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Oct 8 17:12:45 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(123) state =3D Opened
Oct 8 17:12:45 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:45 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Oct 8 17:12:48 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(124) state =3D Opened
Oct 8 17:12:48 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:48 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Oct 8 17:12:51 jester ppp[577]: tun0: LCP: deflink: =
RecvProtocolRej(125) state =3D Opened
Oct 8 17:12:51 jester ppp[577]: tun0: LCP: deflink: -- Protocol 0x8057 =
(Internet Protocol V6 Control Protocol) was rejected!
Oct 8 17:12:51 jester ppp[577]: tun0: Phase: deflink: IPV6CP protocol =
reject closes IPV6CP !
Netstat
-----------
su-2.05b# netstat -nr
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif =
Expire
127.0.0.1 127.0.0.1 UH 0 0 lo0
192.168.0 link#1 UC 1 0 fxp0
192.168.0.2 00:40:f4:59:f8:8f UHLW 1 763 fxp0 =
744
202.74.163.135 127.0.0.1 UH 0 0 lo0
202.74.164.8 202.74.163.135 UH 0 0 tun0
Internet6:
Destination Gateway Flags =
Netif Expire
::1 ::1 UH =
lo0
fe80::%fxp0/64 link#1 UC =
fxp0
fe80::203:47ff:fe94:2bcc%fxp0 00:03:47:94:2b:cc UHL =
lo0
fe80::%lo0/64 fe80::1%lo0 Uc =
lo0
fe80::1%lo0 link#3 UHL =
lo0
ff01::/32 ::1 U =
lo0
ff02::%fxp0/32 link#1 UC =
fxp0
ff02::%lo0/32 ::1 UC =
lo0
ff02::%tun0/32 fe80::203:47ff:fe94:2bcc%tun0 UGS =
tun0
ff02::%tun1/32 fe80::203:47ff:fe94:2bcc%tun1 UC =
tun1
su-2.05b# netstat -nr
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif =
Expire
127.0.0.1 127.0.0.1 UH 0 0 lo0
192.168.0 link#1 UC 1 0 fxp0
192.168.0.2 00:40:f4:59:f8:8f UHLW 1 763 fxp0 =
744
202.74.163.135 127.0.0.1 UH 0 0 lo0
202.74.164.8 202.74.163.135 UH 0 0 tun0
Internet6:
Destination Gateway Flags =
Netif Expire
::1 ::1 UH =
lo0
fe80::%fxp0/64 link#1 UC =
fxp0
fe80::203:47ff:fe94:2bcc%fxp0 00:03:47:94:2b:cc UHL =
lo0
fe80::%lo0/64 fe80::1%lo0 Uc =
lo0
fe80::1%lo0 link#3 UHL =
lo0
ff01::/32 ::1 U =
lo0
ff02::%fxp0/32 link#1 UC =
fxp0
ff02::%lo0/32 ::1 UC =
lo0
ff02::%tun0/32 fe80::203:47ff:fe94:2bcc%tun0 UGS =
tun0
ff02::%tun1/32 fe80::203:47ff:fe94:2bcc%tun1 UC =
tun1
Ifconfig
----------
su-2.05b# ifconfig -a
fxp0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::203:47ff:fe94:2bcc%fxp0 prefixlen 64 scopeid 0x1
ether 00:03:47:94:2b:cc
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lp0: flags=3D8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
tun0: flags=3D8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
inet 202.74.163.135 --> 202.74.164.8 netmask 0xffffffff
Opened by PID 577
tun1: flags=3D8010<POINTOPOINT,MULTICAST> mtu 1500
ppp configuration
----------------------
su-2.05b#
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $
#################################################################
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 =3D COM1, cuaa1 =3D COM2)
#
set device /dev/cuaa0
set speed 38400
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180 # 3 minute idle timer (the =
default)
enable dns # request DNS info (for =
resolv.conf)
papchap:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
set phone -------
set authname -----
set authkey -------
set ifaddr 0 0 127.2.2.2
add default HISADDR # Add a (sticky) default route
hosts
--------
127.0.0.1 localhost.exhausted.org localhost
192.168.0.1 jester.exhausted.org jester
192.168.0.1 jester.exhausted.org.
192.168.0.2 elpiojo
resolv
---------
resolv.conf
domain exhausted.org
nameserver 202.74.164.3
nameserver 202.74.164.33
cheers,
Edwet
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001301c38e23$743cff60$0200a8c0>