Date: Thu, 28 Apr 2005 08:20:14 GMT From: Andras Got <andrej@antiszoc.hu> To: freebsd-i386@FreeBSD.org Subject: Re: i386/80426: 5.4-RC3 still panic when boot on ASUS P2B-DS M/B Message-ID: <200504280820.j3S8KEXR067908@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/80426; it has been noted by GNATS.
From: Andras Got <andrej@antiszoc.hu>
To: g_jin@lbl.gov
Cc: FreeBSD-gnats-submit@FreeBSD.org
Subject: Re: i386/80426: 5.4-RC3 still panic when boot on ASUS P2B-DS M/B
Date: Thu, 28 Apr 2005 10:12:29 +0200
Hi,
I have a similar M/B and it works fine. Try disable the dualcpu at the fi=
rst boot and build a custom=20
world and kernel and it should be OK. I upgraded 5.4-PRE a while ago, but=
I use this machine without=20
a problem since 5.3-RELEASE.
dmesg is following and a dmidecode snippet under it :)
uptime: 10:12AM up 4 days, 10:29, 1 user, load averages: 0.03, 0.01, 0.0=
0
Apr 23 23:43:35 linda syslogd: kernel boot file is /boot/kernel/kernel
Apr 23 23:43:35 linda kernel: Copyright (c) 1992-2005 The FreeBSD Project=
.
Apr 23 23:43:35 linda kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988,=
1989, 1991, 1992, 1993, 1994
Apr 23 23:43:35 linda kernel: The Regents of the University of California=
. All rights reserved.
Apr 23 23:43:35 linda kernel: FreeBSD 5.4-PRERELEASE #9: Thu Mar 10 11:32=
:56 CET 2005
Apr 23 23:43:35 linda kernel: root@linda.chello.hu:/usr/obj/usr/src/sys/A=
NDREJ
Apr 23 23:43:35 linda kernel: Timecounter "i8254" frequency 1193182 Hz qu=
ality 0
Apr 23 23:43:35 linda kernel: CPU: Pentium II/Pentium II Xeon/Celeron (40=
0.91-MHz 686-class CPU)
Apr 23 23:43:35 linda kernel: Origin =3D "GenuineIntel" Id =3D 0x653 St=
epping =3D 3
Apr 23 23:43:35 linda kernel:=20
Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,F
XSR>
Apr 23 23:43:35 linda kernel: real memory =3D 671076352 (639 MB)
Apr 23 23:43:35 linda kernel: avail memory =3D 651255808 (621 MB)
Apr 23 23:43:35 linda kernel: MPTable: <OEM00000 PROD00000000>
Apr 23 23:43:35 linda kernel: FreeBSD/SMP: Multiprocessor System Detected=
: 2 CPUs
Apr 23 23:43:35 linda kernel: cpu0 (BSP): APIC ID: 1
Apr 23 23:43:35 linda kernel: cpu1 (AP): APIC ID: 0
Apr 23 23:43:35 linda kernel: ioapic0: Assuming intbase of 0
Apr 23 23:43:35 linda kernel: ioapic0 <Version 1.1> irqs 0-23 on motherbo=
ard
Apr 23 23:43:35 linda kernel: npx0: <math processor> on motherboard
Apr 23 23:43:35 linda kernel: npx0: INT 16 interface
Apr 23 23:43:35 linda kernel: cpu0 on motherboard
Apr 23 23:43:35 linda kernel: cpu1 on motherboard
Apr 23 23:43:35 linda kernel: pcib0: <MPTable Host-PCI bridge> pcibus 0 o=
n motherboard
Apr 23 23:43:35 linda kernel: pci0: <PCI bus> on pcib0
Apr 23 23:43:35 linda kernel: agp0: <Intel 82443BX (440 BX) host to PCI b=
ridge> mem=20
0xe7800000-0xe7bfffff at device 0.0 on pci
0
Apr 23 23:43:35 linda kernel: pcib1: <MPTable PCI-PCI bridge> at device 1=
.0 on pci0
Apr 23 23:43:35 linda kernel: pci1: <PCI bus> on pcib1
Apr 23 23:43:35 linda kernel: agp0: <Intel 82443BX (440 BX) host to PCI b=
ridge> mem=20
0xe7800000-0xe7bfffff at device 0.0 on pci
0
Apr 23 23:43:35 linda kernel: pcib1: <MPTable PCI-PCI bridge> at device 1=
.0 on pci0
Apr 23 23:43:35 linda kernel: pci1: <PCI bus> on pcib1
Apr 23 23:43:35 linda kernel: pci1: <display, VGA> at device 0.0 (no driv=
er attached)
Apr 23 23:43:35 linda kernel: isab0: <PCI-ISA bridge> at device 4.0 on pc=
i0
Apr 23 23:43:35 linda kernel: isa0: <ISA bus> on isab0
Apr 23 23:43:35 linda kernel: atapci0: <Intel PIIX4 UDMA33 controller> po=
rt=20
0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7
at device 4.1 on pci0
Apr 23 23:43:35 linda kernel: ata0: channel #0 on atapci0
Apr 23 23:43:35 linda kernel: ata1: channel #1 on atapci0
Apr 23 23:43:35 linda kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB contro=
ller> port 0xb400-0xb41f at=20
device 4.2 on pci0
Apr 23 23:43:35 linda kernel: usb0: <Intel 82371AB/EB (PIIX4) USB control=
ler> on uhci0
Apr 23 23:43:35 linda kernel: usb0: USB revision 1.0
Apr 23 23:43:35 linda kernel: uhub0: Intel UHCI root hub, class 9/0, rev =
1.00/1.00, addr 1
Apr 23 23:43:35 linda kernel: uhub0: 2 ports with 2 removable, self power=
ed
Apr 23 23:43:35 linda kernel: piix0: <PIIX Timecounter> port 0xe800-0xe80=
f at device 4.3 on pci0
Apr 23 23:43:35 linda kernel: Timecounter "PIIX" frequency 3579545 Hz qua=
lity 0
Apr 23 23:43:35 linda kernel: em0: <Intel(R) PRO/1000 Network Connection,=
Version - 1.7.35> port=20
0xb000-0xb03f mem 0xde000000-
0xde01ffff,0xde800000-0xde81ffff irq 19 at device 9.0 on pci0
Apr 23 23:43:35 linda kernel: em0: Ethernet address: 00:0e:0c:37:68:ac
Apr 23 23:43:35 linda kernel: em0: Speed:N/A Duplex:N/A
Apr 23 23:43:35 linda kernel: dc0: <Accton EN2242 MiniPCI 10/100BaseTX> p=
ort 0xa800-0xa8ff mem=20
0xdd800000-0xdd8003ff irq 18 at
device 10.0 on pci0
Apr 23 23:43:35 linda kernel: miibus0: <MII bus> on dc0
Apr 23 23:43:35 linda kernel: ukphy0: <Generic IEEE 802.3u media interfac=
e> on miibus0
Apr 23 23:43:35 linda kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 1=
00baseTX-FDX, auto
Apr 23 23:43:35 linda kernel: dc0: Ethernet address: 00:04:e2:1f:90:84
Apr 23 23:43:35 linda kernel: dc0: if_start running deferred for Giant
Apr 23 23:43:35 linda kernel: ahc0: <Adaptec 2940 Ultra2 SCSI adapter> po=
rt 0xa400-0xa4ff mem=20
0xdd000000-0xdd000fff irq 17 at
device 11.0 on pci0
Apr 23 23:43:35 linda kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=3D=
7, 32/253 SCBs
Apr 23 23:43:35 linda kernel: orm0: <ISA Option ROMs> at iomem 0xc8000-0x=
c8fff,0xc0000-0xc7fff on isa0
Apr 23 23:43:35 linda kernel: pmtimer0 on isa0
Apr 23 23:43:35 linda kernel: atkbdc0: <Keyboard controller (i8042)> at p=
ort 0x64,0x60 on isa0
Apr 23 23:43:35 linda kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Apr 23 23:43:35 linda kernel: kbd0 at atkbd0
Apr 23 23:43:35 linda kernel: ppc0: parallel port not found.
Apr 23 23:43:35 linda kernel: sc0: <System console> at flags 0x100 on isa=
0
Apr 23 23:43:35 linda kernel: sc0: VGA <16 virtual consoles, flags=3D0x30=
0>
Apr 23 23:43:35 linda kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 o=
n isa0
Apr 23 23:43:35 linda kernel: sio0: type 16550A
Apr 23 23:43:35 linda kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Apr 23 23:43:35 linda kernel: sio1: type 16550A
Apr 23 23:43:35 linda kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df=
iomem 0xa0000-0xbffff on isa0
Apr 23 23:43:35 linda kernel: unknown: <PNP0501> can't assign resources (=
port)
Apr 23 23:43:35 linda kernel: unknown: <PNP0501> can't assign resources (=
port)
Apr 23 23:43:35 linda kernel: unknown: <PNP0303> can't assign resources (=
port)
Apr 23 23:43:35 linda kernel: Timecounters tick every 10.000 msec
Apr 23 23:43:35 linda kernel: IP Filter: v3.4.35 initialized. Default =3D=
pass all, Logging =3D enabled
Apr 23 23:43:35 linda kernel: Waiting 5 seconds for SCSI devices to settl=
e
Apr 23 23:43:35 linda kernel: da0 at ahc0 bus 0 target 0 lun 0
Apr 23 23:43:35 linda kernel: da0: <SEAGATE ST336607LW 6D03> Fixed Direct=
Access SCSI-3 device
# dmidecode 2.6
Legacy DMI 2.0 present.
32 structures occupying 1050 bytes.
Table at 0x000F5A5A.
Handle 0x0000
DMI type 0, 18 bytes.
BIOS Information
Vendor: Award Software, Inc.
Version: ASUS P2B-D ACPI BIOS Revision 1011
Release Date: 09/08/99
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 256 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
Japanese floppy for NEC 9800 1.2 MB is supported=
(int 13h)
5.25"/360 KB floppy services are supported (int =
13h)
5.25"/1.2 MB floppy services are supported (int =
13h)
3.5"/720 KB floppy services are supported (int 1=
3h)
3.5"/2.88 MB floppy services are supported (int =
13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
Handle 0x0002
DMI type 2, 8 bytes.
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: P2B-D
Version: REV 1.xx
Serial Number: MB-1234567890
Jin Guojun[VFF] =EDrta:
>>Number: 80426
>>Category: i386
>>Synopsis: 5.4-RC3 still panic when boot on ASUS P2B-DS M/B
>>Confidential: no
>>Severity: serious
>>Priority: medium
>>Responsible: freebsd-i386
>>State: open
>>Quarter: =20
>>Keywords: =20
>>Date-Required:
>>Class: sw-bug
>>Submitter-Id: current-users
>>Arrival-Date: Thu Apr 28 05:30:10 GMT 2005
>>Closed-Date:
>>Last-Modified:
>>Originator: Jin Guojun[VFF]
>>Release: FreeBSD 5.4-RC3 i386
>>Organization:
>>Environment:
>=20
> System: FreeBSD 5.4-RC3 i386
>=20
>=20
> FreeBSD 5.4-RC3 i386 with ASUS P2B-DS motherboard
>=20
>=20
>>Description:
>=20
> FreeBSD 5.4-RC3 still panic when boot with ACPI enabled on
> ASUS P2B-DS motherboard.
>=20
> boot message:
>=20
> ACPI APIC Table: <ASUS P2B-DS >
> ACPI disabled by blacklist. Contact your BIOS vendor.
> MADT: ACPI Startup failed with AE_ERROR
> ...
> panic
>=20
> I do not think vendor will update their BIOS since this is older
> motherboard.
> Will this be possible fixable?=20
>=20
>=20
>>How-To-Repeat:
>=20
> Try boot 5.4-RC3 on ASUS P2B-DS based machine.
>=20
>>Fix:
>=20
>=20
> =09
>=20
>=20
>=20
>>Release-Note:
>>Audit-Trail:
>>Unformatted:
>=20
> _______________________________________________
> freebsd-i386@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-i386
> To unsubscribe, send any mail to "freebsd-i386-unsubscribe@freebsd.org"
>=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200504280820.j3S8KEXR067908>