Date: Mon, 27 Jul 2020 17:15:51 -0700 From: Mark Millard <marklmi@yahoo.com> To: John-Mark Gurney <jmg@funkthat.com> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: CFT: major update to if_ure (patch did not apply cleanly for head -r363510) (example PowerMac problem?) Message-ID: <78CB1756-28D7-4442-934D-9C4D2B37EC67@yahoo.com> In-Reply-To: <C2C302F7-7F36-450D-AF91-858008CBC5FA@yahoo.com> References: <D5A3AECA-96C8-4E16-8795-B590ED9D82E3.ref@yahoo.com> <D5A3AECA-96C8-4E16-8795-B590ED9D82E3@yahoo.com> <20200727012035.GS4213@funkthat.com> <F5CFD6E1-787B-4416-B666-86847166D99F@yahoo.com> <C2C302F7-7F36-450D-AF91-858008CBC5FA@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2020-Jul-27, at 16:43, Mark Millard <marklmi at yahoo.com> wrote: > On 2020-Jul-26, at 18:20, John-Mark Gurney <jmg at funkthat.com> = wrote: >=20 >> Mark Millard wrote this message on Sat, Jul 25, 2020 at 19:13 -0700: >>> For reference for what applying the patch >>> reported (see Hunk #14): >>=20 >> Ok, updated it to be relative to r363583... >>=20 >> I had made a white spcae commit to if_ure.c, but hadn't made the >> patch relative to it after that commit.. should work now.. >=20 > I updated an old PowerMac G5 (2 sockets/2 cores each) to > head -r363590 with the update patch and tjen plugged in the > USB EtherNet device. The result (extracted from dmesg -a) > was: >=20 > usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT > usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT > usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT > usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT > usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_TIMEOUT, = ignored) > usbd_setup_device_desc: getting device descriptor at addr 2 failed, = USB_ERR_TIMEOUT > ugen2.2: <Unknown > at usbus2 (disconnected) > uhub_reattach_port: could not allocate new device >=20 > Unfortunately, I'd not tried a PowerMac with the type of > device before the update. I do not know if the above is > new behavior or not. >=20 > The PowerMac is big-endian, which is what got me to think > about trying it there. The PowerMac is also 64-bit running > a 64-bit FreeBSD. Its USB is 2.0. >=20 > (It also has 2 GigaBit EtherNet ports of its own so I'm not > likely to use a USB device outside special testing.) >=20 I tried what normally shows as an axge0, but trying on the PowerMac G5. It got the same sort of messages as above. The problem does not seem to be tied to your patch. It does prevent my testing the patch on the G5. =3D=3D=3D Mark Millard marklmi at yahoo.com ( dsl-only.net went away in early 2018-Mar)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?78CB1756-28D7-4442-934D-9C4D2B37EC67>