Date: Sat, 18 Jul 2009 15:21:38 +0800 From: Fbsd1 <fbsd1@a1poweruser.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: USB Flash Memory stick not bootable Message-ID: <4A617802.3010501@a1poweruser.com>
next in thread | raw e-mail | index | archive | help
Have problem with being able to boot off an new 8GB USB Flash Memory
stick. When I load the 8.0 disc1.iso to an 2GB USB Flash Memory stick it
will boot fine. But when I do the same thing to the new 8GB USB Flash
Memory stick it’s not recognized as bootable. I can access the installed
partitions manually by mounting then on the 7.2 system. So I know the
8GB stick has been loaded correctly. I am doing this on a 7.2 release.
Below are the console messages that get displayed when I plug in each of
the USB Flash Memory stick. You can see a great difference between the
first set of messages for the 8GB stick versus the 2GB stick that
follows. I want to boot off the 8GB stick just like I do with the 2GB
stick.
What is going on here? They should be handled the same way.
Brand new 8GB Kingston DataTraveler 120 purchased 7/16/09
umass0: <Kingston DataTraveler 120, class 0/0, rev 2.00/1.00, addr 2>
on uhub1
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DataTraveler 120 1.00> Removable Direct Access SCSI-2
device
da0: 1.000MB/s transfers
da0: 7643MB (15654848 512 byte sectors: 255H 63S/T 974C)
GEOM_LABEL: Label for provider da0a is ufsid/4a615a2cc673eb3d.
# 3 year old 2GB Kingston DataTraveler
umass1: <vendor 0x0930 USB Flash Memory, class 0/0, rev 2.00/2.00,
addr 3> on uhub1
da1 at umass-sim1 bus 1 target 0 lun 0
da1: < USB Flash Memory 6.50> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A617802.3010501>