Date: Fri, 15 Dec 2017 17:06:19 +0100 From: Emmanuel Vadot <manu@bidouilliste.com> To: =?ISO-8859-1?Q?=3F=3F?= <unto.foru13@gmail.com> Cc: freebsd-arm@freebsd.org, Mark Millard <markmi@dsl-only.net> Subject: Re: Orange pi one plug network cable after booted ,network will not active Message-ID: <20171215170619.8021fb253a15f3e54a356f9a@bidouilliste.com> In-Reply-To: <CAKpwDm28jTx%2BrRWDwzDK2oO=MjVL8N0NuCbgyc3nJP0Y7xmxuw@mail.gmail.com> References: <CAKpwDm28jTx%2BrRWDwzDK2oO=MjVL8N0NuCbgyc3nJP0Y7xmxuw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 15 Dec 2017 16:41:56 +0800 ?? <unto.foru13@gmail.com> wrote: > Dear all, >=20 > I think ,this maybe is the problem of u-boot.dtb?? >=20 > scenario1:plug network cable first then power on,kernel had loaded. > network will work well. > even if I plug off cable then plug on again .network work well too. >=20 > scenario2:network cable not plug till kernel had loaded and prompt login > message. >=20 > booting message=3D>awg0:soft reset timed out >=20 > then I plug network cable ,network will not work. > ifconfig will not show awg0. > /etc/netstart will show =3D> ifconfig: interface awg0 does not exist >=20 > blow is my u-boot source > https://github.com/evadot/u-boot/tree/freebsd >=20 > export CROSS_COMPILE=3Darm-none-eabi- > gmake orangepi_one_defconfig > gmake menuconfig > vi .config > CONFIG_API=3Dy > gmake >=20 > how could I fixed this problem ?? > thanks all. I'll look into it but note that emac (if_awg) isn't in the dts for now and only will be when we pull the Liunx 4.15 dts (early january). --=20 Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20171215170619.8021fb253a15f3e54a356f9a>