Date: Wed, 14 Jun 2006 13:27:14 -0700 From: Garrett Cooper <youshi10@u.washington.edu> To: freebsd-questions@freebsd.org Subject: Making a L440GX+ work (was "Trying to revive a server... AIC-7896 freezes pre-POST completion") Message-ID: <44907122.8000801@u.washington.edu> In-Reply-To: <6.0.0.22.2.20060614103744.0271cf10@mail.computinginnovations.com> References: <448F9A87.3070809@u.washington.edu> <6.0.0.22.2.20060614103744.0271cf10@mail.computinginnovations.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Derek Ragona wrote: > IF you can find the documentation for the motherboard, see if there is a > reset jumper. That jumper should reset the BIOS to factory defaults to > allow it to get through the post and into setup. Some motherboards > actually take you into setup with the jumper moved to reset bad > configurations. > > Also, unplug any cards and drives, leave the system board with just ram > and cpu and video (unless it is built in) until you get it configured. > > -Derek > > > At 12:11 AM 6/14/2006, Garrett Cooper wrote: >> Hello again all, >> I know this isn't a FreeBSD question really, but I just >> started up a motherboard with onboard SCSI (Adaptec AIC-7896), and for >> some odd reason it freezes pre-POST before it attempts to boot and >> there isn't any way where I can get into the BIOS to change the >> settings it seems. Does anyone know how I can maybe disable the >> onboard SCSI controller since it appears to hang while detecting disks? >> Thanks a million! >> -Garrett Thanks all for the help. It turns out after a bit of researching and seeing some numbers on boot, I was able to find the documentation for the motherboard. It's an L440GX+ motherboard which does appear to still work properly, but here's the clincher. I read that the processors I have installed are compatible (2xP3 600E CPUs), _but_ only if the BIOS is updated past a particular version and I don't know if that is true or not. Plus I don't know what is causing the thing to halt because it appears to work on occasion--got the system to boot once but halted it since I couldn't get into the BIOS and change the settings. I cleared the CMOS--both by setting the jumper and removing the battery, and all it appears to have done superficially is make the original splash screen come up during boot. So, my question is has anyone experienced anything like this and if so how did you solve this problem, or does anyone know how to fix this situation apart from (maybe) installing Windows and updating the BIOS with a different processor? Also, I have a horde of PC133 SD RAM and only one stick of PC100 RAM, which doesn't appear to work in the motherboard, and the motherboard is rated to _only_ support PC100 SD RAM. Is it all right for me to use RAM which is rated 33MHz faster than recommended? I think it's possible with some motherboards but I'm not sure about this one. Thanks again for all your help guys :). -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44907122.8000801>