From owner-freebsd-stable Mon Jan 25 06:25:22 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id GAA21341 for freebsd-stable-outgoing; Mon, 25 Jan 1999 06:25:22 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from mortar.carlson.com (mortar.carlson.com [208.240.12.98]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id GAA21326; Mon, 25 Jan 1999 06:25:17 -0800 (PST) (envelope-from veldy@visi.com) Received: from mortar.carlson.com (root@localhost) by mortar.carlson.com with ESMTP id IAA00991; Mon, 25 Jan 1999 08:24:47 -0600 (CST) Received: from w142844 ([172.25.99.35]) by mortar.carlson.com with SMTP id IAA00987; Mon, 25 Jan 1999 08:24:47 -0600 (CST) Message-ID: <006201be486e$86a31630$236319ac@w142844.carlson.com> From: "Thomas T. Veldhouse" To: "FreeBSD-Current" , "FreeBSD-Stable" X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Subject: Re: Failure to make buildworld on RELENG_3 Date: Mon, 25 Jan 1999 08:25:14 -0600 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I completely re-cvsuped the sources and I still get errors in libpam. Here is my make.conf: # $Id: make.conf,v 1.70 1998/10/16 03:26:54 peter Exp $ # # This file, if present, will be read by make (see /usr/share/mk/sys.mk). # It allows you to override macro definitions to make without changing # your source tree, or anything the source tree installs. # # This file must be in valid Makefile syntax. # # You have to find the things you can put here in the Makefiles and # documentation of the source tree. # # One, and probably the most common, use could be: # CFLAGS= -O -pipe # # Another useful entry is # #NOPROFILE= true # Avoid compiling profiled libraries # #INSTALL=install -C # Compare before install # # To avoid building the default system perl #NOPERL= true # To avoid building the suid perl #NOSUIDPERL= true # # To avoid building sendmail #NO_SENDMAIL= true # # To have 'obj' symlinks created in your source directory # (they aren't needed/necessary) #OBJLINK= yes # # To compile just the kernel with special optimisations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway): # COPTFLAGS= -O -pipe # # To use an ELF kernel, you can set this flag. MAKE SURE that you have a # working /boot/loader installed. /boot.config should specify "/boot/loader" # as the kernel. The bootblocks load the third stage loader, then it loads # the kernel proper and any other modules you want. Its startup script # file is /boot/loader.conf: # #KERNFORMAT= elf # # To compile and install the 4.4 lite libm instead of the default use: # #WANT_CSRG_LIBM= yes # # If you do not want unformatted manual pages to be compressed # when they are installed: # #NOMANCOMPRESS= true # # # If you want the "compat" shared libraries installed as part of your normal # builds, uncomment these: # #COMPAT1X= yes #COMPAT20= yes #COMPAT21= yes # # # If you do not want additional documentation (some of which are # a few hundred KB's) for ports to be installed: # #NOPORTDOCS= true # # # Default format for system documentation, depends on your printer. # Set this to "ascii" for simple printers or screen # #PRINTERDEVICE= ps # # # How long to wait for a console keypress before booting the default kernel. # This value is approximately in milliseconds. Keypresses are accepted by the # BIOS before booting from disk, making it possible to give custom boot # parameters even when this is set to 0. # #BOOTWAIT=0 #BOOTWAIT=30000 # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. (0x3E8 = COM2) # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 9600. Set the speed to a larger value # for better interactive response. # #BOOT_COMCONSOLE_SPEED= 115200 # # # By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. # If you have a XFree86 from before 3.0 that has the X distribution in # /usr/X386, you want to uncomment this. # #X11BASE= /usr/X386 # # # If you have Motif on your system, uncomment this. # #HAVE_MOTIF= yes #MOTIF_STATIC= yes # # If the default location of the Motif library (specified below) is NOT # appropriate for you, uncomment this and change it to the correct value. # If your motif is in ${X11BASE}/lib, you don't need to touch this line. # #MOTIFLIB= -L${X11BASE}/lib -lXm # # # If you are running behind a firewall, uncomment the following to leave a # hint for various make-spawned utilities that they should use passive FTP. # #FTP_PASSIVE_MODE= YES # # If you're resident in the USA, this will help various ports to determine # whether or not they should attempt to comply with the various U.S. # export regulations on certain types of software which do not apply to # anyone else in the world. # USA_RESIDENT= YES # # Next one will help ports developers to debug # #FORCE_PKG_REGISTER= YES # # # Port master sites. # # If you want your port fetches to go somewhere else than the default # (specified below) in case the distfile/patchfile was not found, # uncomment this and change it to a location nearest you. (Don't # remove the "/${DIST_SUBDIR}/" part.) # #MASTER_SITE_BACKUP?= \ # ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/ # # If you want your port fetches to check the above site first (before # the MASTER_SITES specified in the port Makefiles), uncomment the # line below. You can also change the right side to point to wherever # you want. # #MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} # # Some ports use a special variable to point to a collection of # mirrors of well-known software archives. If you have a mirror close # to you, uncomment any of the following lines and change it to that # address. (Don't remove the "/%SUBDIR%/" part.) # # Note: the right hand sides of the following lines are only for your # information. For a full list of default sites, take a look at # bsd.port.mk. # #MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ #MASTER_SITE_GNU= ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ #MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ #MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ #MASTER_SITE_SUNSITE= ftp://sunsite.unc.edu/pub/Linux/%SUBDIR%/ # # # Kerberos IV # If you want KerberosIV (KTH eBones), define this: # MAKE_KERBEROS4= yes # # # Kerberos5 # If you want to install Kerberos5 somewhere other than /usr/local, # define this: # #KRB5_HOME= /usr/local/krb5 # # # CVSup update flags. Edit SUPFILE settings to reflect whichever distribution # file(s) you use on your site (see /usr/share/examples/cvsup/README for more # information on CVSup and these files). To use, do "make update" in /usr/src. # #SUP_UPDATE= yes # #SUP= /usr/local/bin/cvsup #SUPFLAGS= -g -L 2 -z #SUPFILE= /usr/share/examples/cvsup/standard-supfile #SUPFILE1= /usr/share/examples/cvsup/secure-supfile #SUPFILE2= /usr/share/examples/cvsup/ports-supfile # # top(1) uses a hash table for the user names. The size of this hash # can be tuned to match the number of local users. The table size should # be a prime number approximately twice as large as the number of lines in # /etc/passwd. The default number is 20011. # #TOP_TABLE_SIZE= 101 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message