Date: Mon, 17 Oct 2016 11:54:15 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-scsi@FreeBSD.org Subject: [Bug 211990] iscsi fails to reconnect and does not release devices Message-ID: <bug-211990-5312-r4fSqdRgmo@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-211990-5312@https.bugs.freebsd.org/bugzilla/> References: <bug-211990-5312@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D211990 --- Comment #12 from Julien Cigar <julien@perdition.city> --- Some more info: on filer2: root@filer2:/home/jcigar # cat /etc/ctl.conf=20 auth-group ag0 { chap xxx xxx } portal-group pg0 { discovery-auth-group no-authentication listen 10.20.30.32 } target iqn.2016-08.lan.prod:target0 { auth-group ag0 portal-group pg0 lun 0 { blocksize 4096 path /dev/gpt/f2data0 } } target iqn.2016-08.lan.prod:target1 { auth-group ag0 portal-group pg0 lun 0 { blocksize 4096 path /dev/gpt/f2data1 } } root@filer2:/home/jcigar # ifconfig bge1 bge1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 =20=20=20=20=20=20=20 options=3Dc019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN= _HWTSO,LINKSTATE> ether d0:bf:9c:3a:b7:25 inet 10.20.30.32 netmask 0xffffff00 broadcast 10.20.30.255=20 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex>) status: active root@filer2:/home/jcigar # pciconf -lv bge1 bge1@pci0:2:0:1: class=3D0x020000 card=3D0x22e8103c chip=3D0x165f14e= 4 rev=3D0x00 hdr=3D0x00 vendor =3D 'Broadcom Corporation' device =3D 'NetXtreme BCM5720 Gigabit Ethernet PCIe' class =3D network subclass =3D ethernet root@filer2:/home/jcigar # grep 'bge1' /var/run/dmesg.boot=20 bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92b00000-0x92b0ffff,0x92b10000-0x92b1ffff,0x92b20000-0x92b2ffff at device= 0.1 on pci2 bge1: APE FW version: NCSI v1.3.12.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> on bge1 bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: d0:bf:9c:3a:b7:25 bge1: link state changed to DOWN bge1: link state changed to UP on filer1.prod.lan: root@filer1:/home/jcigar # cat /etc/iscsi.conf=20 t0 { TargetAddress =3D 10.20.30.32 TargetName =3D iqn.2016-08.lan.prod:target0 AuthMethod =3D CHAP chapIName =3D xxx chapSecret =3D xxx } t1 { TargetAddress =3D 10.20.30.32 TargetName =3D iqn.2016-08.lan.prod:target1 AuthMethod =3D CHAP chapIName =3D xxx chapSecret =3D xxx } root@filer1:/home/jcigar # ifconfig bge1 bge1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 =20=20=20=20=20=20=20 options=3Dc019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN= _HWTSO,LINKSTATE> ether d0:bf:9c:3a:c6:e1 inet 10.20.30.31 netmask 0xffffff00 broadcast 10.20.30.255=20 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex,master>) status: active root@filer1:/home/jcigar # pciconf -lv bge1 bge1@pci0:2:0:1: class=3D0x020000 card=3D0x22e8103c chip=3D0x165f14e= 4 rev=3D0x00 hdr=3D0x00 vendor =3D 'Broadcom Corporation' device =3D 'NetXtreme BCM5720 Gigabit Ethernet PCIe' class =3D network subclass =3D ethernet root@filer1:/home/jcigar # grep 'bge1' /var/run/dmesg.boot=20 bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92b00000-0x92b0ffff,0x92b10000-0x92b1ffff,0x92b20000-0x92b2ffff at device= 0.1 on pci2 bge1: APE FW version: NCSI v1.3.12.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> on bge1 bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: d0:bf:9c:3a:c6:e1 bge1: link state changed to DOWN bge1: link state changed to UP --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-211990-5312-r4fSqdRgmo>