Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 31 Mar 2012 10:29:20 +0000 (UTC)
From:      Marius Strobl <marius@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-7@freebsd.org
Subject:   svn commit: r233742 - stable/7/sys/dev/mpt/mpilib
Message-ID:  <201203311029.q2VATK5i096155@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: marius
Date: Sat Mar 31 10:29:20 2012
New Revision: 233742
URL: http://svn.freebsd.org/changeset/base/233742

Log:
  MFC: r233425
  
  Consistently update to the MPI header set version 01.05.20 after r224761
  (MFC'ed to stable/2 in r224821).
  Requested by:	mjacob

Added:
  stable/7/sys/dev/mpt/mpilib/mpi_log_fc.h
     - copied unchanged from r233425, head/sys/dev/mpt/mpilib/mpi_log_fc.h
  stable/7/sys/dev/mpt/mpilib/mpi_log_sas.h
     - copied unchanged from r233425, head/sys/dev/mpt/mpilib/mpi_log_sas.h
Deleted:
  stable/7/sys/dev/mpt/mpilib/mpi_inb.h
Modified:
  stable/7/sys/dev/mpt/mpilib/mpi.h
  stable/7/sys/dev/mpt/mpilib/mpi_cnfg.h
  stable/7/sys/dev/mpt/mpilib/mpi_fc.h
  stable/7/sys/dev/mpt/mpilib/mpi_init.h
  stable/7/sys/dev/mpt/mpilib/mpi_ioc.h
  stable/7/sys/dev/mpt/mpilib/mpi_lan.h
  stable/7/sys/dev/mpt/mpilib/mpi_raid.h
  stable/7/sys/dev/mpt/mpilib/mpi_sas.h
  stable/7/sys/dev/mpt/mpilib/mpi_targ.h
  stable/7/sys/dev/mpt/mpilib/mpi_tool.h
  stable/7/sys/dev/mpt/mpilib/mpi_type.h
Directory Properties:
  stable/7/sys/   (props changed)
  stable/7/sys/cddl/contrib/opensolaris/   (props changed)
  stable/7/sys/contrib/dev/acpica/   (props changed)
  stable/7/sys/contrib/pf/   (props changed)

Modified: stable/7/sys/dev/mpt/mpilib/mpi.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without
@@ -33,7 +33,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.13
+ *    mpi.h Version:  01.05.17
  *
  *  Version History
  *  ---------------
@@ -106,6 +106,10 @@
  *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  10-11-06  01.05.12  Bumped MPI_HEADER_VERSION_UNIT.
  *  05-24-07  01.05.13  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-07-07  01.05.14  Bumped MPI_HEADER_VERSION_UNIT.
+ *  01-15-08  01.05.15  Bumped MPI_HEADER_VERSION_UNIT.
+ *  03-28-08  01.05.16  Bumped MPI_HEADER_VERSION_UNIT.
+ *  07-11-08  01.05.17  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -136,7 +140,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x10)
+#define MPI_HEADER_VERSION_UNIT             (0x14)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)

Modified: stable/7/sys/dev/mpt/mpilib/mpi_cnfg.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_cnfg.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_cnfg.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without
@@ -33,7 +33,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.15
+ *    mpi_cnfg.h Version:  01.05.19
  *
  *  Version History
  *  ---------------
@@ -335,6 +335,28 @@
  *                      Expander Page 0 Flags field.
  *                      Fixed define for
  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ *                      define.
+ *                      Added BIOS Page 4 structure.
+ *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ *                      Physcial Disk Page 1.
+ *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
+ *                      Manufacturing Page 4.
+ *                      Added Solid State Drives Supported bit to IOC Page 6
+ *                      Capabilities Flags.
+ *                      Added new value for AccessStatus field of SAS Device
+ *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
+ *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
+ *                      to control coercion size and the mixing of SAS and SATA
+ *                      SSD drives.
+ *  07-11-08  01.05.19  Added defines MPI_MANPAGE4_EXTFLAGS_RAID0_SINGLE_DRIVE
+ *                      and MPI_MANPAGE4_EXTFLAGS_SSD_SCRUB_DISABLE for ExtFlags
+ *                      field of Manufacturing Page 4.
+ *                      Added defines for a new bit in BIOS Page 1 BiosOptions
+ *                      field to control adapter scan order.
+ *                      Added BootDeviceWaitTime field to SAS IO Unit Page 2.
+ *                      Added MPI_SAS_PHY0_PHYINFO_PHY_VACANT for use in PhyInfo
+ *                      field of SAS Expander Page 1.
  *  --------------------------------------------------------------------------
  */
 
@@ -713,6 +735,16 @@ typedef struct _CONFIG_PAGE_MANUFACTURIN
 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
 
 /* defines for the ExtFlags field */
+#define MPI_MANPAGE4_EXTFLAGS_RAID0_SINGLE_DRIVE        (0x0400)
+#define MPI_MANPAGE4_EXTFLAGS_SSD_SCRUB_DISABLE         (0x0200)
+#define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE        (0x0180)
+#define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE       (7)
+#define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE         (0)
+#define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE       (1)
+
+#define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA       (0x0040)
+#define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD       (0x0020)
+#define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT         (0x0010)
 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA      (0x0008)
 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE         (0x0004)
 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE        (0x0002)
@@ -1186,6 +1218,8 @@ typedef struct _CONFIG_PAGE_IOC_6
 
 /* IOC Page 6 Capabilities Flags */
 
+#define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT              (0x00000020)
+#define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT  (0x00000010)
 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING    (0x00000008)
 
 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE       (0x00000006)
@@ -1222,6 +1256,10 @@ typedef struct _CONFIG_PAGE_BIOS_1
 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE                (0x00000400)
 #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE                 (0x00000200)
 #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE                (0x00000100)
+
+#define MPI_BIOSPAGE1_OPTIONS_SCAN_HIGH_TO_LOW          (0x00000002)
+#define MPI_BIOSPAGE1_OPTIONS_SCAN_LOW_TO_HIGH          (0x00000000)
+
 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS              (0x00000001)
 
 /* values for the IOCSettings field */
@@ -1455,6 +1493,15 @@ typedef struct _CONFIG_PAGE_BIOS_2
 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)
 
+typedef struct _CONFIG_PAGE_BIOS_4
+{
+    CONFIG_PAGE_HEADER      Header;                     /* 00h */
+    U64                     ReassignmentBaseWWID;       /* 04h */
+} CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
+  BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
+
+#define MPI_BIOSPAGE4_PAGEVERSION                       (0x00)
+
 
 /****************************************************************************
 *   SCSI Port Config Pages
@@ -2446,6 +2493,15 @@ typedef struct _RAID_PHYS_DISK1_PATH
 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN          (0x0002)
 #define MPI_RAID_PHYSDISK1_FLAG_INVALID         (0x0001)
 
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
+#define MPI_RAID_PHYS_DISK1_PATH_MAX    (1)
+#endif
+
 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
 {
     CONFIG_PAGE_HEADER              Header;             /* 00h */
@@ -2453,7 +2509,7 @@ typedef struct _CONFIG_PAGE_RAID_PHYS_DI
     U8                              PhysDiskNum;        /* 05h */
     U16                             Reserved2;          /* 06h */
     U32                             Reserved1;          /* 08h */
-    RAID_PHYS_DISK1_PATH            Path[1];            /* 0Ch */
+    RAID_PHYS_DISK1_PATH            Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
   RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
 
@@ -2578,6 +2634,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_
 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
+#define MPI_SAS_IOUNIT0_RATE_6_0                            (0x0A)
 
 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
 
@@ -2697,7 +2754,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_
 {
     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
     U8                                  NumDevsPerEnclosure;    /* 08h */
-    U8                                  Reserved1;              /* 09h */
+    U8                                  BootDeviceWaitTime;     /* 09h */
     U16                                 Reserved2;              /* 0Ah */
     U16                                 MaxPersistentIDs;       /* 0Ch */
     U16                                 NumPersistentIDsUsed;   /* 0Eh */
@@ -2707,7 +2764,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_
 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
   SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
 
-#define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x06)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x07)
 
 /* values for SAS IO Unit Page 2 Status field */
 #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED        (0x08)
@@ -2871,6 +2928,7 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_0
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED            (0x01)
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED      (0x02)
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT   (0x03)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION   (0x04)
 /* specific values for SATA Init failures */
 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                 (0x10)
 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT    (0x11)
@@ -2981,6 +3039,7 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0
 #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC              (0x01)
 
 /* values for SAS PHY Page 0 PhyInfo field */
+#define MPI_SAS_PHY0_PHYINFO_PHY_VACANT                         (0x80000000)
 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE                   (0x00004000)
 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR                 (0x00002000)
 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY                        (0x00001000)

Modified: stable/7/sys/dev/mpt/mpilib/mpi_fc.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_fc.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_fc.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without

Modified: stable/7/sys/dev/mpt/mpilib/mpi_init.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_init.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_init.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without

Modified: stable/7/sys/dev/mpt/mpilib/mpi_ioc.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_ioc.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_ioc.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without
@@ -868,6 +868,7 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_
 #define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE         (0x03)
 #define MPI_EVENT_SAS_PLS_LR_RATE_1_5                       (0x08)
 #define MPI_EVENT_SAS_PLS_LR_RATE_3_0                       (0x09)
+#define MPI_EVENT_SAS_PLS_LR_RATE_6_0                       (0x0A)
 
 /* SAS Discovery Event data */
 

Modified: stable/7/sys/dev/mpt/mpilib/mpi_lan.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_lan.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_lan.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without

Copied: stable/7/sys/dev/mpt/mpilib/mpi_log_fc.h (from r233425, head/sys/dev/mpt/mpilib/mpi_log_fc.h)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/7/sys/dev/mpt/mpilib/mpi_log_fc.h	Sat Mar 31 10:29:20 2012	(r233742, copy of r233425, head/sys/dev/mpt/mpilib/mpi_log_fc.h)
@@ -0,0 +1,117 @@
+/* $FreeBSD$ */
+/*-
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon including
+ *    a substantially similar Disclaimer requirement for further binary
+ *    redistribution.
+ * 3. Neither the name of the LSI Logic Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
+ * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  NAME:           fc_log.h
+ *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
+ *  DESCRIPTION:    Contains the enumerated list of values that may be returned
+ *                  in the IOCLogInfo field of a MPI Default Reply Message.
+ *
+ *  CREATION DATE:  6/02/2000
+ *  ID:             $Id: fc_log.h,v 4.6 2001/07/26 14:41:33 sschremm Exp $
+ */
+
+
+/*
+ * MpiIocLogInfo_t enum
+ *
+ * These 32 bit values are used in the IOCLogInfo field of the MPI reply
+ * messages.
+ * The value is 0xabcccccc where
+ *          a = The type of log info as per the MPI spec. Since these codes are
+ *              all for Fibre Channel this value will always be 2.
+ *          b = Specifies a subclass of the firmware where
+ *                  0 = FCP Initiator
+ *                  1 = FCP Target
+ *                  2 = LAN
+ *                  3 = MPI Message Layer
+ *                  4 = FC Link
+ *                  5 = Context Manager
+ *                  6 = Invalid Field Offset
+ *                  7 = State Change Info
+ *                  all others are reserved for future use
+ *          c = A specific value within the subclass.
+ *
+ * NOTE: Any new values should be added to the end of each subclass so that the
+ *       codes remain consistent across firmware releases.
+ */
+typedef enum _MpiIocLogInfoFc
+{
+    MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
+    MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN         = 0x20000007, /* Scatter Gather overrun  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS      = 0x20000008, /* Receiver detected context mismatch via invalid header */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE       = 0x2000000A, /* Link failure occurred  */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT         = 0x2000000B, /* Transmitter timeout error */
+
+    MPI_IOCLOGINFO_FC_TARGET_BASE                   = 0x21000000,
+    MPI_IOCLOGINFO_FC_TARGET_NO_PDISC               = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
+    MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN               = 0x21000002, /* not sent because we are not logged in to the remote node */
+    MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP     = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP     = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA      = 0x21000005, /* Data In, Auto Response, missing data frames */
+    MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP     = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP     = 0x21000007, /* Auto-response after a write not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP     = 0x21000008, /* Data In, No Response, not completed due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA      = 0x21000009, /* Data In, No Response, missing data frames */
+    MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP     = 0x2100000a, /* Manual Response not sent due to a LIP */
+    MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3             = 0x2100000b, /* not sent because remote node does not support Class 3 */
+    MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID        = 0x2100000c, /* not sent because login to remote node not validated */
+    MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND          = 0x2100000e, /* cleared from the outbound queue after a logout */
+    MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN    = 0x2100000f, /* cleared waiting for data after a logout */
+
+    MPI_IOCLOGINFO_FC_LAN_BASE                      = 0x22000000,
+    MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING         = 0x22000001, /* Transaction Context Sgl Missing */
+    MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE         = 0x22000002, /* Transaction Context found before an EOB */
+    MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET        = 0x22000003, /* Transaction Context value has reserved bits set */
+    MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG            = 0x22000004, /* Invalid SGL Flags */
+
+    MPI_IOCLOGINFO_FC_MSG_BASE                      = 0x23000000,
+
+    MPI_IOCLOGINFO_FC_LINK_BASE                     = 0x24000000,
+    MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT        = 0x24000001, /* Loop initialization timed out */
+    MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED      = 0x24000002, /* Another system controller already initialized the loop */
+    MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED     = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
+    MPI_IOCLOGINFO_FC_LINK_CRC_ERROR                = 0x24000004, /* CRC check detected error on received frame */
+
+    MPI_IOCLOGINFO_FC_CTX_BASE                      = 0x25000000,
+
+    MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET     = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
+    MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET      = 0x26ffffff,
+
+    MPI_IOCLOGINFO_FC_STATE_CHANGE                  = 0x27000000  /* The lower 24 bits give additional information concerning state change */
+
+} MpiIocLogInfoFc_t;

Copied: stable/7/sys/dev/mpt/mpilib/mpi_log_sas.h (from r233425, head/sys/dev/mpt/mpilib/mpi_log_sas.h)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/7/sys/dev/mpt/mpilib/mpi_log_sas.h	Sat Mar 31 10:29:20 2012	(r233742, copy of r233425, head/sys/dev/mpt/mpilib/mpi_log_sas.h)
@@ -0,0 +1,352 @@
+/* $FreeBSD$ */
+/*-
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon including
+ *    a substantially similar Disclaimer requirement for further binary
+ *    redistribution.
+ * 3. Neither the name of the LSI Logic Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
+ * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/***************************************************************************
+ *                                                                         *
+ * Description                                                             *
+ * ------------                                                            *
+ * This include file contains SAS firmware interface IOC Log Info codes    *
+ *                                                                         *
+ *-------------------------------------------------------------------------*
+ */
+
+#ifndef IOPI_IOCLOGINFO_H_INCLUDED
+#define IOPI_IOCLOGINFO_H_INCLUDED
+
+#define SAS_LOGINFO_NEXUS_LOSS		0x31170000
+#define SAS_LOGINFO_MASK		0xFFFF0000
+
+/****************************************************************************/
+/*  IOC LOGINFO defines, 0x00000000 - 0x0FFFFFFF                            */
+/*  Format:                                                                 */
+/*      Bits 31-28: MPI_IOCLOGINFO_TYPE_SAS (3)                             */
+/*      Bits 27-24: IOC_LOGINFO_ORIGINATOR: 0=IOP, 1=PL, 2=IR               */
+/*      Bits 23-16: LOGINFO_CODE                                            */
+/*      Bits 15-0:  LOGINFO_CODE Specific                                   */
+/****************************************************************************/
+
+/****************************************************************************/
+/* IOC_LOGINFO_ORIGINATOR defines                                           */
+/****************************************************************************/
+#define IOC_LOGINFO_ORIGINATOR_IOP                      (0x00000000)
+#define IOC_LOGINFO_ORIGINATOR_PL                       (0x01000000)
+#define IOC_LOGINFO_ORIGINATOR_IR                       (0x02000000)
+
+#define IOC_LOGINFO_ORIGINATOR_MASK                     (0x0F000000)
+
+/****************************************************************************/
+/* LOGINFO_CODE defines                                                     */
+/****************************************************************************/
+#define IOC_LOGINFO_CODE_MASK                           (0x00FF0000)
+#define IOC_LOGINFO_CODE_SHIFT                          (16)
+
+/****************************************************************************/
+/* IOP LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IOP          */
+/****************************************************************************/
+#define IOP_LOGINFO_CODE_INVALID_SAS_ADDRESS                 (0x00010000)
+#define IOP_LOGINFO_CODE_UNUSED2                             (0x00020000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE                 (0x00030000)
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_RT              (0x00030100) /* Route Table Entry not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PN              (0x00030200) /* Invalid Page Number */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM            (0x00030300) /* Invalid FORM */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT              (0x00030400) /* Invalid Page Type */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DNM             (0x00030500) /* Device Not Mapped */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_PERSIST         (0x00030600) /* Persistent Page not found */
+#define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT         (0x00030700) /* Default Page not found */
+
+#define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE         (0x0003E000) /* Tried to upload from flash, but there is none */
+#define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE         (0x0003E001) /* ImageType field contents were invalid */
+#define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE           (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occured while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occured while DMAing FW to host memory */
+
+#define IOP_LOGINFO_CODE_DIAG_MSG_ERROR                      (0x00040000) /* Error handling diag msg - or'd with diag status */
+
+#define IOP_LOGINFO_CODE_TASK_TERMINATED                     (0x00050000)
+
+#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R         (0x00060001) /* Read Action not supported for SEP msg */
+#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R      (0x00060002) /* Invalid Bus/ID in SEP msg */
+
+#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED            (0x00070001)
+#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED       (0x00070002)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO            (0x00070003)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO          (0x00070004)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ      (0x00070005)
+
+#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT                 (0x00080000)
+
+/****************************************************************************/
+/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL            */
+/****************************************************************************/
+#define PL_LOGINFO_CODE_OPEN_FAILURE                         (0x00010000) /* see SUB_CODE_OPEN_FAIL_ below */
+
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_NO_DEST_TIME_OUT       (0x00000001)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATHWAY_BLOCKED        (0x00000002)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE0          (0x00000003)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_CONTINUE1          (0x00000004)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE0        (0x00000005)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_INITIALIZE1        (0x00000006)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP0              (0x00000007)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RES_STOP1              (0x00000008)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RETRY                  (0x00000009)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BREAK                  (0x0000000A)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0B              (0x0000000B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP       (0x0000000C)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D              (0x0000000D)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL      (0x0000000E)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST               (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP          (0x00000012)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP          (0x00000013)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0      (0x00000014)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON1      (0x00000015)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON2      (0x00000016)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON3      (0x00000017)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_STP_RESOURCES_BSY      (0x00000018)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_WRONG_DESTINATION      (0x00000019)
+
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PATH_BLOCKED           (0x0000001B) /* Retry Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_AWT_MAXED              (0x0000001C) /* Retry Timeout */
+
+
+
+#define PL_LOGINFO_CODE_INVALID_SGL                          (0x00020000)
+#define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH        (0x00030000)
+#define PL_LOGINFO_CODE_FRAME_XFER_ERROR                     (0x00040000)
+#define PL_LOGINFO_CODE_TX_FM_CONNECTED_LOW                  (0x00050000)
+#define PL_LOGINFO_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET          (0x00060000)
+#define PL_LOGINFO_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR       (0x00070000)
+#define PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR      (0x00080000)
+#define PL_LOGINFO_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS      (0x00090000)
+#define PL_LOGINFO_CODE_RX_FM_INVALID_MESSAGE                (0x000A0000)
+#define PL_LOGINFO_CODE_RX_CTX_MESSAGE_VALID_ERROR           (0x000B0000)
+#define PL_LOGINFO_CODE_RX_FM_CURRENT_FRAME_ERROR            (0x000C0000)
+#define PL_LOGINFO_CODE_SATA_LINK_DOWN                       (0x000D0000)
+#define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS            (0x000E0000)
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE                  (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED            (0x000F0001) /* PL not yet initialized, can't do config page req. */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT               (0x000F0100) /* Invalid Page Type */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS         (0x000F0200) /* Invalid Number of Phys */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP          (0x000F0300) /* Case Not Handled */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_DEV           (0x000F0400) /* No Device Found */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_FORM             (0x000F0500) /* Invalid FORM */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY              (0x000F0600) /* Invalid Phy */
+#define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER         (0x000F0700) /* No Owner Found */
+#define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT             (0x00100000)
+#define PL_LOGINFO_CODE_RESET                                (0x00110000) /* See Sub-Codes below (PL_LOGINFO_SUB_CODE) */
+#define PL_LOGINFO_CODE_ABORT                                (0x00120000) /* See Sub-Codes below  (PL_LOGINFO_SUB_CODE)*/
+#define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED                  (0x00130000)
+#define PL_LOGINFO_CODE_IO_EXECUTED                          (0x00140000)
+#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER        (0x00150000)
+#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT                     (0x00160000)
+#define PL_LOGINFO_CODE_IO_DEVICE_MISSING_DELAY_RETRY        (0x00170000)
+#define PL_LOGINFO_CODE_IO_CANCELLED_DUE_TO_R_ERR            (0x00180000)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE                     (0x00000100)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT     (0x00000101)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_SATA_NEG_RATE_2HI   (0x00000102)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_RATE_NOT_SUPPORTED  (0x00000103)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_BREAK               (0x00000104)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ZONE_VIOLATION      (0x00000114)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON0            (0x00000114) /* Open Reject (Zone Violation) - available on SAS-2 devices */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON1            (0x00000115)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON2            (0x00000116)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ABANDON3            (0x00000117)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT         (0x0000011A) /* Open Reject (Retry) Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATH_BLOCKED        (0x0000011B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED           (0x0000011C) /* Arbitration Wait Timer Maxed */
+
+#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET                 (0x00000120)
+#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER                  (0x00000130)  /* Leave lower nibble (1-f) reserved. */
+#define PL_LOGINFO_SUB_CODE_PORT_LAYER                       (0x00000140)  /* Leave lower nibble (1-f) reserved. */
+
+
+#define PL_LOGINFO_SUB_CODE_INVALID_SGL                      (0x00000200)
+#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH    (0x00000300)
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                 (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
+                                                                          /* Bit 0 is Status Bit 0: FrameXferErr */
+                                                                          /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+                                                                          /* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
+
+#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW              (0x00000500)
+#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET      (0x00000600)
+#define PL_LOGINFO_SUB_CODE_SATA_READ_LOG_RECEIVE_DATA_ERR   (0x00000700)
+#define PL_LOGINFO_SUB_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR  (0x00000800)
+#define PL_LOGINFO_SUB_CODE_SATA_ERR_IN_RCV_SET_DEV_BIT_FIS  (0x00000900)
+#define PL_LOGINFO_SUB_CODE_RX_FM_INVALID_MESSAGE            (0x00000A00)
+#define PL_LOGINFO_SUB_CODE_RX_CTX_MESSAGE_VALID_ERROR       (0x00000B00)
+#define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR        (0x00000C00)
+#define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN                   (0x00000D00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS        (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET       (0x00000E01)
+#define PL_LOGINFO_SUB_CODE_SECOND_OPEN                      (0x00000F00)
+#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT         (0x00001000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION  		 (0x00002000) /* not currently used in mainline */
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK              (0x00003000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP          (0x00004000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
+
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL      (0x00200040) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED    (0x00200050) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM               (0x00200060) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT          (0x00200070) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED        (0x00200080) /* GPIO not configured */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR           (0x00200090) /* GPIO can't allocate a frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR     (0x002000A0) /* GPIO failed config page request */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR      (0x002000B0) /* Can't get frame for SES command */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR               (0x002000C0) /* I/O execution error */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED      (0x002000D0) /* SEP I/O retries exhausted */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR      (0x002000E0) /* Can't get frame for SMP command */
+
+#define PL_LOGINFO_DA_SEP_NOT_PRESENT                        (0x00200100) /* SEP not present when msg received */
+#define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR                (0x00200101) /* Can only accept 1 msg at a time */
+#define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE           (0x00200102) /* ISTWI interrupt recvd. while IDLE */
+#define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE           (0x00200103) /* SEP NACK'd, it is busy */
+#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK                (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM              (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transfering data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1          (0x00200108) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2          (0x00200109) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP            (0x0020010A) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA    (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND                (0x0020010C) /* SEP doesn't support CDB opcode f/w location 1 */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_2              (0x0020010D) /* SEP doesn't support CDB opcode f/w location 2 */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND_3              (0x0020010E) /* SEP doesn't support CDB opcode f/w location 3 */
+
+
+/****************************************************************************/
+/* IR LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = IR            */
+/****************************************************************************/
+#define IR_LOGINFO_RAID_ACTION_ERROR                           (0x00010000)
+#define IR_LOGINFO_CODE_UNUSED2                                (0x00020000)
+
+/* Amount of information passed down for Create Volume is too large */
+#define IR_LOGINFO_VOLUME_CREATE_INVALID_LENGTH                (0x00010001)
+/* Creation of duplicate volume attempted (Bus/Target ID checked) */
+#define IR_LOGINFO_VOLUME_CREATE_DUPLICATE                     (0x00010002)
+/* Creation failed due to maximum number of supported volumes exceeded */
+#define IR_LOGINFO_VOLUME_CREATE_NO_SLOTS                      (0x00010003)
+/* Creation failed due to DMA error in trying to read from host */
+#define IR_LOGINFO_VOLUME_CREATE_DMA_ERROR                     (0x00010004)
+/* Creation failed due to invalid volume type passed down */
+#define IR_LOGINFO_VOLUME_CREATE_INVALID_VOLUME_TYPE           (0x00010005)
+/* Creation failed due to error reading MFG Page 4 */
+#define IR_LOGINFO_VOLUME_MFG_PAGE4_ERROR                      (0x00010006)
+/* Creation failed when trying to create internal structures */
+#define IR_LOGINFO_VOLUME_INTERNAL_CONFIG_STRUCTURE_ERROR      (0x00010007)
+
+/* Activation failed due to trying to activate an already active volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_AN_ACTIVE_VOLUME          (0x00010010)
+/* Activation failed due to trying to active unsupported volume type  */
+#define IR_LOGINFO_VOLUME_ACTIVATING_INVALID_VOLUME_TYPE       (0x00010011)
+/* Activation failed due to trying to active too many volumes  */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_VOLUMES          (0x00010012)
+/* Activation failed due to Volume ID in use already */
+#define IR_LOGINFO_VOLUME_ACTIVATING_VOLUME_ID_IN_USE          (0x00010013)
+/* Activation failed call to activateVolume returned failure */
+#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED               (0x00010014)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED      (0x00010015)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS       (0x00010016)
+
+/* Phys Disk failed, too many phys disks */
+#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS              (0x00010020)
+/* Amount of information passed down for Create Pnysdisk is too large */
+#define IR_LOGINFO_PHYSDISK_CREATE_INVALID_LENGTH              (0x00010021)
+/* Creation failed due to DMA error in trying to read from host */
+#define IR_LOGINFO_PHYSDISK_CREATE_DMA_ERROR                   (0x00010022)
+/* Creation failed due to invalid Bus TargetID passed down */
+#define IR_LOGINFO_PHYSDISK_CREATE_BUS_TID_INVALID             (0x00010023)
+/* Creation failed due to error in creating RAID Phys Disk Config Page */
+#define IR_LOGINFO_PHYSDISK_CREATE_CONFIG_PAGE_ERROR           (0x00010024)
+
+
+/* Compatibility Error : IR Disabled */
+#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED                  (0x00010030)
+/* Compatibility Error : Inquiry Comand failed */
+#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED                 (0x00010031)
+/* Compatibility Error : Device not direct access device */
+#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS              (0x00010032)
+/* Compatibility Error : Removable device found */
+#define IR_LOGINFO_COMPAT_ERROR_REMOVABLE_FOUND                (0x00010033)
+/* Compatibility Error : Device SCSI Version not 2 or higher */
+#define IR_LOGINFO_COMPAT_ERROR_NEED_SCSI_2_OR_HIGHER          (0x00010034)
+/* Compatibility Error : SATA device, 48 BIT LBA not supported */
+#define IR_LOGINFO_COMPAT_ERROR_SATA_48BIT_LBA_NOT_SUPPORTED   (0x00010035)
+/* Compatibility Error : Device does not have 512 byte block sizes */
+#define IR_LOGINFO_COMPAT_ERROR_DEVICE_NOT_512_BYTE_BLOCK      (0x00010036)
+/* Compatibility Error : Volume Type check failed */
+#define IR_LOGINFO_COMPAT_ERROR_VOLUME_TYPE_CHECK_FAILED       (0x00010037)
+/* Compatibility Error : Volume Type is unsupported by FW */
+#define IR_LOGINFO_COMPAT_ERROR_UNSUPPORTED_VOLUME_TYPE        (0x00010038)
+/* Compatibility Error : Disk drive too small for use in volume */
+#define IR_LOGINFO_COMPAT_ERROR_DISK_TOO_SMALL                 (0x00010039)
+/* Compatibility Error : Phys disk for Create Volume not found */
+#define IR_LOGINFO_COMPAT_ERROR_PHYS_DISK_NOT_FOUND            (0x0001003A)
+/* Compatibility Error : membership count error, too many or too few disks for volume type */
+#define IR_LOGINFO_COMPAT_ERROR_MEMBERSHIP_COUNT               (0x0001003B)
+/* Compatibility Error : Disk stripe sizes must be 64KB */
+#define IR_LOGINFO_COMPAT_ERROR_NON_64K_STRIPE_SIZE            (0x0001003C)
+/* Compatibility Error : IME size limited to < 2TB */
+#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
+
+/* Device Firmware Update: DFU can only be started once */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS            (0x00010050)
+/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE    (0x00010051)
+/* Device Firmware Update: DFU Timeout cannot be zero */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT            (0x00010052)
+/* Device Firmware Update: CREATE TIMER FAILED */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS                  (0x00010053)
+/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE           (0x00010054)
+/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED  (0x00010055)
+/* Device Firmware Update: Unable to allocate memory for page */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE             (0x00010056)
+/* Device Firmware Update:  */
+//#define IR_LOGINFO_DEV_FW_UPDATE_ERR_                         (0x00010054)
+
+
+/****************************************************************************/
+/* Defines for convenience                                                  */
+/****************************************************************************/
+#define IOC_LOGINFO_PREFIX_IOP                          ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IOP)
+#define IOC_LOGINFO_PREFIX_PL                           ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_PL)
+#define IOC_LOGINFO_PREFIX_IR                           ((MPI_IOCLOGINFO_TYPE_SAS << MPI_IOCLOGINFO_TYPE_SHIFT) | IOC_LOGINFO_ORIGINATOR_IR)
+
+#endif /* end of file */
+

Modified: stable/7/sys/dev/mpt/mpilib/mpi_raid.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_raid.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_raid.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -33,7 +33,7 @@
  *          Title:  MPI RAID message and structures
  *  Creation Date:  February 27, 2001
  *
- *    mpi_raid.h Version:  01.05.03
+ *    mpi_raid.h Version:  01.05.05
  *
  *  Version History
  *  ---------------
@@ -61,6 +61,9 @@
  *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
  *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
  *                      associated defines.
+ *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
+ *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
  *  --------------------------------------------------------------------------
  */
 
@@ -120,6 +123,7 @@ typedef struct _MSG_RAID_ACTION
 #define MPI_RAID_ACTION_SET_RESYNC_RATE             (0x13)
 #define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE         (0x14)
 #define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE       (0x15)
+#define MPI_RAID_ACTION_SET_VOLUME_NAME             (0x16)
 
 /* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC           (0x00000001)
@@ -132,6 +136,9 @@ typedef struct _MSG_RAID_ACTION
 #define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
 #define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
 
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD  (0x00000001)
+
 /* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
 

Modified: stable/7/sys/dev/mpt/mpilib/mpi_sas.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_sas.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_sas.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without
@@ -33,7 +33,7 @@
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  August 19, 2004
  *
- *    mpi_sas.h Version:  01.05.04
+ *    mpi_sas.h Version:  01.05.05
  *
  *  Version History
  *  ---------------
@@ -50,6 +50,10 @@
  *                      reply.
  *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
  *                      Unit Control request.
+ *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ *                      including adding IOCParameter and IOCParameter value
+ *                      fields to SAS IO Unit Control Request.
+ *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
  *  --------------------------------------------------------------------------
  */
 
@@ -87,6 +91,8 @@
  * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  * data and SAS IO Unit Configuration pages.
  */
+#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC    (0xF0000000)
+
 #define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
@@ -243,7 +249,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_R
     U8                      ChainOffset;        /* 02h */
     U8                      Function;           /* 03h */
     U16                     DevHandle;          /* 04h */
-    U8                      Reserved3;          /* 06h */
+    U8                      IOCParameter;       /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
     U8                      TargetID;           /* 0Ch */
@@ -252,7 +258,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_R
     U8                      PrimFlags;          /* 0Fh */
     U32                     Primitive;          /* 10h */
     U64                     SASAddress;         /* 14h */
-    U32                     Reserved4;          /* 1Ch */
+    U32                     IOCParameterValue;  /* 1Ch */
 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
   SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
 
@@ -268,6 +274,8 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_R
 #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
 #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)  /* obsolete name */
 #define MPI_SAS_OP_REMOVE_DEVICE                (0x0D)
+#define MPI_SAS_OP_SET_IOC_PARAMETER            (0x0E)
+#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN         (0x80)
 
 /* values for the PrimFlags field */
 #define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
@@ -283,7 +291,7 @@ typedef struct _MSG_SAS_IOUNIT_CONTROL_R
     U8                      MsgLength;          /* 02h */
     U8                      Function;           /* 03h */
     U16                     DevHandle;          /* 04h */
-    U8                      Reserved3;          /* 06h */
+    U8                      IOCParameter;       /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
     U16                     Reserved4;          /* 0Ch */

Modified: stable/7/sys/dev/mpt/mpilib/mpi_targ.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_targ.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_targ.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without

Modified: stable/7/sys/dev/mpt/mpilib/mpi_tool.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_tool.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_tool.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without

Modified: stable/7/sys/dev/mpt/mpilib/mpi_type.h
==============================================================================
--- stable/7/sys/dev/mpt/mpilib/mpi_type.h	Sat Mar 31 10:27:00 2012	(r233741)
+++ stable/7/sys/dev/mpt/mpilib/mpi_type.h	Sat Mar 31 10:29:20 2012	(r233742)
@@ -1,6 +1,6 @@
 /* $FreeBSD$ */
 /*
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
+ * Copyright (c) 2000-2010, LSI Logic Corporation and its contributors.
  * All rights reserved.
  * 
  * Redistribution and use in source and binary forms, with or without



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201203311029.q2VATK5i096155>