Date: Wed, 21 Mar 2001 17:50:43 +0100 From: "Wolfram Kraushaar" <wk@xtweb.de> To: <freebsd-questions@FreeBSD.ORG> Subject: Need help with an error message Message-ID: <LNBBJNIAAJDGIECKKHHEIEJBCKAA.wk@xtweb.de>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C0B22F.732203F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello, can you help me with the message at the bottom? Right now I'm running the GENERIC kernel. Does it mean the disk is too slow or faulty? I have no idea, do you? The disk (da7) is placed in a concatenated vinum-plex. When I launch vinum it tells me the drive is up (without problems) Attached is compete dmesg printout. ahc1: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem 0xea001000-0xea001fff irq 10 at device 10.0 on pci0 aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs ... da7 at ahc1 bus 0 target 5 lun 0 da7: <Quantum XP32150 81HB> Fixed Direct Access SCSI-2 device da7: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da7: 2050MB (4199760 512 byte sectors: 255H 63S/T 261C) ... This message appears in dmesg after some hours running without problems: << (da7:ahc1:0:5:0): SCB 0x3 - timed out while idle, SEQADDR == 0x4 STACK == 0x1, 0x189, 0x159, 0x0 SXFRCTL0 == 0x80 SCB count = 20 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 1:3 QOUTFIFO entries: Sequencer Free SCB List: 3 0 2 4 5 6 7 8 9 10 11 12 13 14 15 Pending list: 3 Kernel Free SCB list: 7 14 6 8 5 9 15 16 17 18 19 0 1 2 13 12 11 10 sg[0] - Addr 0x6008800 : Length 1024 (da7:ahc1:0:5:0): Queuing a BDR SCB (da7:ahc1:0:5:0): Bus Device Reset Message Sent (da7:ahc1:0:5:0): no longer in timeout, status = 34b ahc1: Bus Device Reset on A:5. 1 SCBs aborted >> Thx in advance for any help, Wolfram Kraushaar ------=_NextPart_000_0001_01C0B22F.732203F0 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000 jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.32-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2 = Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR> real memory =3D 268435456 (262144K bytes) config> di pcic0 config> di lnc0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> q avail memory =3D 257085440 (251060K bytes) Preloaded elf kernel "kernel" at 0xc0436000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on = pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 = on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f at = device 7.2 on pci0 uhci0: Invalid irq 255 uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS device_probe_and_attach: uhci0 attach returned 6 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at = device 7.3 on pci0 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem = 0xea000000-0xea000fff irq 11 at device 9.0 on pci0 aic7880: Single Channel A, SCSI Id=3D7, 16/255 SCBs ahc1: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem = 0xea001000-0xea001fff irq 10 at device 10.0 on pci0 aic7870: Wide Channel A, SCSI Id=3D7, 16/255 SCBs xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xec00-0xec3f irq 5 at = device 11.0 on pci0 xl0: Ethernet address: 00:60:97:b4:47:e5 miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 6204MB <ST36531A> [13446/15/63] at ata0-master UDMA33 ad1: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata0-slave UDMA33 ad2: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata1-master UDMA33 ad3: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata1-slave UDMA33 Waiting 15 seconds for SCSI devices to settle sa0 at ahc1 bus 0 target 6 lun 0 sa0: <HP HP35470A T503> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) Mounting root from ufs:/dev/ad0s1a da4 at ahc1 bus 0 target 2 lun 0 da4: <COMPAQPC DPES-31080 S31K> Fixed Direct Access SCSI-2 device da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing = Enabled da4: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C) cd0 at ahc0 bus 0 target 2 lun 0 cd0: <NEC CD-ROM DRIVE:502 2.0y> Removable CD-ROM SCSI-2 device cd0: 8.064MB/s transfers (8.064MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing = Enabled da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) da5 at ahc1 bus 0 target 3 lun 0 da5: <COMPAQPC DPES-31080 S31K> Fixed Direct Access SCSI-2 device da5: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing = Enabled da5: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C) da2 at ahc1 bus 0 target 0 lun 0 da2: <COMPAQPC DORS-31080 WA8B> Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing = Enabled da2: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C) da6 at ahc1 bus 0 target 4 lun 0 da6: <DEC RZ26L (C) DEC 440C> Fixed Direct Access SCSI-2 device da6: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing = Enabled da6: 1001MB (2050860 512 byte sectors: 64H 32S/T 1001C) da1 at ahc0 bus 0 target 1 lun 0 da1: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device da1: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing = Enabled da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) da7 at ahc1 bus 0 target 5 lun 0 da7: <Quantum XP32150 81HB> Fixed Direct Access SCSI-2 device da7: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing = Enabled da7: 2050MB (4199760 512 byte sectors: 255H 63S/T 261C) da3 at ahc1 bus 0 target 1 lun 0 da3: <COMPAQPC DORS-31080 WA8B> Fixed Direct Access SCSI-2 device da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing = Enabled da3: 1001MB (2051000 512 byte sectors: 64H 32S/T 1001C) vinum: loaded vinum: reading configuration from /dev/da7s1e vinum: updating configuration from /dev/da6s1e vinum: updating configuration from /dev/da5s1e vinum: updating configuration from /dev/da4s1e vinum: updating configuration from /dev/da3s1e vinum: updating configuration from /dev/da2s1e vinum: updating configuration from /dev/da1s1e vinum: updating configuration from /dev/da0s1e vinum: updating configuration from /dev/ad3s2e vinum: updating configuration from /dev/ad3s1e vinum: updating configuration from /dev/ad2s2e vinum: updating configuration from /dev/ad2s1e vinum: updating configuration from /dev/ad1s2e vinum: updating configuration from /dev/ad1s1e (da7:ahc1:0:5:0): SCB 0x3 - timed out while idle, SEQADDR =3D=3D 0x4 STACK =3D=3D 0x1, 0x189, 0x159, 0x0 SXFRCTL0 =3D=3D 0x80 SCB count =3D 20 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 1:3 QOUTFIFO entries: Sequencer Free SCB List: 3 0 2 4 5 6 7 8 9 10 11 12 13 14 15 Pending list: 3 Kernel Free SCB list: 7 14 6 8 5 9 15 16 17 18 19 0 1 2 13 12 11 10 sg[0] - Addr 0x6008800 : Length 1024 (da7:ahc1:0:5:0): Queuing a BDR SCB (da7:ahc1:0:5:0): Bus Device Reset Message Sent (da7:ahc1:0:5:0): no longer in timeout, status =3D 34b ahc1: Bus Device Reset on A:5. 1 SCBs aborted ------=_NextPart_000_0001_01C0B22F.732203F0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LNBBJNIAAJDGIECKKHHEIEJBCKAA.wk>