Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 May 1998 15:17:12 PDT
From:      "Mike Del" <repenting@hotmail.com>
To:        questions@FreeBSD.ORG
Subject:   I need some help with my pccard.
Message-ID:  <19980513221713.26495.qmail@hotmail.com>

next in thread | raw e-mail | index | archive | help
I was wondering if somone could help me out, I am having problems 
getting FreeBSD 2.2.5 to get my Xircom CreditCard Modem Cm-56T pccard to 
work. Below has more information, I hope someone can help :)     
When I changed the line card "Xircom" "CreditCard Modem CM-56T"
to card "Xircom" "CreditCard Ethernet" I got a message couldn't find
Xircom in database(or something like that). And then i said cardd : 
vers: CreditCard Modem CM-56T. So I could see that it was reading 
the card, and it knows about it. I knows when i remove the card
and when i put it in. But when i put it in, i get a message cardd[45]
: Resource allocation failure for Xircom. I messed with the irq's 
but i don't think that this is the problem. Anyone that could help with 
this problem, or anyone that has setup a Xircom CreditCard Modem CM-56T 
could you please contact me. I would really like the setup
this darn card. :) Below are my pccard.conf, and my kernel. I am using a 
Toshiba 315CDS notebook computer.
------
# $Id: pccard.conf,v 1.4 1996/06/19 01:28:07 nate Exp $
#
# Generally available IO ports
io	0x110-0x13f 0x2f8-0x2ff 0x300-0x32f
#
# Generally available IRQs (Built-in sound-card owners remove 5)
# 10 was the only irq I could get it to work on.
irq	4 9 10 11 13
#
# Available memory slots
memory	0xd4000  96k
#
# Xircom CreditCard Modem CM-56T 
card "Xircom" "CreditCard Modem CM-56T"
	config	0x23 "sio1" 10 
	insert	echo Xircom CreditCard Modem CM-56T found
	remove	echo Xircom CreditCard Modem CM-56T removed
-------
machine		"i386"
cpu		"I586_CPU"
ident	        toshiba	
maxusers	10

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

config		kernel	root on wd0

controller	isa0
controller	eisa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
tape		ft0	at fdc0 drive 2

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		wcd0	#IDE CD-ROM

# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
controller	ncr0
controller	amd0
controller	ahb0
controller	ahc0
controller	bt0	at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller	aic0	at isa? port 0x340 bio irq 11 vector aicintr
controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector 
seaintr

controller	scbus0

device		sd0

device		od0	#See LINT for possible `od' options.

device		st0

device		cd0	#Only need one of these, the code dynamically grows

device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr

controller	matcd0	at isa? port 0x230 bio

device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT 
lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr

#
# Laptop support (see LINT for more options)
#
device		apm0    at isa?	disable	# Advanced Power Management
options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS
# PCCARD (PCMCIA) support
controller	crd0
device		pcic0	at crd?
device		pcic1	at crd?
#options	        	"PCIC_IRQ=0"		# no IRQ (hot swap) mode

device		sio0	at isa? disable port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? disable port "IO_COM2" tty irq 3 vector siointr
#device		sio2	at isa? disable port "IO_COM3" tty irq 5 vector siointr
#device		sio3	at isa? disable port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
device		lpt1	at isa? port? tty
device		mse0	at isa? port 0x23c tty irq 5 vector mseintr

device		psm0	at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr

# Sound board
# *** I have a Yamaha OPL-SAx, I tried these settings, then compiled,
# and ./MAKEDEV snd0, i tried playing a sound i.e. cat ./hello.au > 
/dev/audio
# but i get an error saying that IRQ/DRQ could be incorrect, but the 
setttings
# are correct I believe. 
controller      snd0
device          sb0     at isa? port 0x220 irq 5 conflicts drq 1 vector 
sbintr
device          opl0    at isa? port 0x388

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device vx0

#device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
#device ie1 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ex0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector exintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	vn	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options         SYSVSHM

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980513221713.26495.qmail>