Date: Sat, 16 Oct 2010 03:45:48 +0200 From: Patrick Oeschger <patrick.oeschger@bluewin.ch> To: Alexander Samarin <sasha.devel@gmail.com> Cc: freebsd-arm@freebsd.org Subject: Re: FreeBSD on Gumstix Overo / Beagle Board (TI OMAP3530) Message-ID: <20101016014548.GA22145@freebsd81-1.ip-plus.net> In-Reply-To: <1287238266.2507.16.camel@localhost> References: <1287238266.2507.16.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
alexander, read briefly about the project on google code page seemed yet uncomplete to me but if you succeeded to kompile a kernel for OMAP ... guess i have to have a look at the code again ;D this is really good news mate thx for the hint /pat On Sat, Oct 16, 2010 at 06:11:06PM +0400, Alexander Samarin wrote: > Hello! > > > anybody interested in porting freebsd to > > - gumstix overo > (http://www.gumstix.com/store/catalog/index.php?cPath=27)? > > - beagle board (http://beagleboard.org/project)? > > > > both boards are based on texas instruments OMAP35x (ARM Cortex based) > > guess both boards would be fun to run freebsd on it > > especially the gumstix 'stick' which is really small (see link) > > running at 600mhz and offers (onboard): > > - 256mb ram > > - 256mb flash > > - microSD slot > > - bluetooth / wlaa > > - 600mhz TI OMAP3530 processor > > > > thx for any feedback/interrest > > /pat > > I am interested in this too. I already have one BeagleBoard rev.C4 and > one Zippy Expansion board v1 (with 10-Mbit Ethernet). > > Also there is a project: http://code.google.com/p/beagleboard-freebsd/ > I tried to merge 9-CURRENT and that code. As result, I have bootable > kernel with working SD/MMC interface, but no userspace (probably, my > mistake during merge). > > -- > Best regards, > Alexander Samarin > PGP key ID: 744D6AB4
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20101016014548.GA22145>