Date: Fri, 28 May 2004 14:16:39 -0700 From: Ted Faber <faber@ISI.EDU> To: acpi@freebsd.org Subject: Dell Latitude C610 Message-ID: <20040528211639.GD25131@pun.isi.edu>
next in thread | raw e-mail | index | archive | help
--YkJPYEFdoxh/AXLE Content-Type: multipart/mixed; boundary="pZs/OQEoSSbxGlYw" Content-Disposition: inline --pZs/OQEoSSbxGlYw Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi. My Dell Latitiude C610 Laptop reboots (powers down and then up) on suspend (transition to S3 state). Maybe one time in 10 it goes into a more sleeplike state, but there's no way to wake it without using the power switch and rebooting. I didn't see a similar report in the pr database. I've tried both settings of hw.acpi.disable_on_poweroff and get the same result. Usin APM without ACPI gives a different failure (locks up completely, including a nice shrill squeal that can only be stopped by a power cycle if I press a key), though apm suspend under -STABLE always worked. Attached are the dmesg -v and systcl hw.acpi . ASL is at http://www.isi.edu/tmp/faber-dell_latitude_c610.asl . Let me know if there is anything I can do to help debug. -- Ted Faber http://www.isi.edu/~faber PGP: http://www.isi.edu/~faber/pubkeys.asc Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#SIG --pZs/OQEoSSbxGlYw Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #11: Fri May 28 11:40:31 PDT 2004 root@bug.isi.edu:/usr/obj/usr/src/sys/BUG Preloaded elf kernel "/boot/kernel/kernel" at 0xc0767000. Preloaded elf module "/boot/kernel/if_an.ko" at 0xc07671d8. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc0767284. Preloaded elf module "/boot/kernel/rc4.ko" at 0xc0767330. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07673d8. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0767484. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0767530. Calibrating clock(s) ... i8254 clock: 1193083 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 996788887 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz (996.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536686592 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000829000 - 0x000000001f6a2fff, 518496256 bytes (126586 pages) avail memory = 519639040 (495 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fbb90 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 D 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 atpic: Programming IRQ9 as level/low ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 29 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 29 func 2 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 0.29.2 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.2.0 \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 0.1.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3575, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3576, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bfa0, size 4, enabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc80, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000dc00, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is routed to irq 11 found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 228M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.LNKA irq 11: [ 9 10 11] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff map[14]: type 4, range 32, base 0000c000, size 8, enabled pcib1: device (null) requested decoded I/O range 0xc000-0xc0ff map[18]: type 1, range 32, base fcff0000, size 16, enabled pcib1: device (null) requested decoded memory range 0xfcff0000-0xfcffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.1 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.1.2 \\_SB_.PCI0.LNKB irq 11: [ 5 7] low,level,sharable 2.3.0 \\_SB_.PCI0.LNKD irq 11: [ 5 7 9 10 11] low,level,sharable 2.3.1 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.0.0 \\_SB_.PCI0.LNKC irq 11: [ 9 10 11] low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000ec80, size 7, enabled pcib2: device (null) requested decoded I/O range 0xec80-0xecff map[14]: type 1, range 32, base f8fffc00, size 7, enabled pcib2: device (null) requested decoded memory range 0xf8fffc00-0xf8fffc7f pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC) pcib2: slot 0 INTA is routed to irq 11 found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=2, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=2, slot=1, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 pci2: <network, ethernet> at device 0.0 (no driver attached) cbb0: <TI1420 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xf4000000-0xfbffffff cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD) pcib2: slot 1 INTA is routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00e31028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1420 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xf4000000-0xfbffffff cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD) pcib2: slot 1 INTA is routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00e31028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: <Intel ICH3 (82801CA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc80 pcm0: [GIANT-LOCKED] pcm0: <Cirrus Logic CS4205 AC97 Codec (id = 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic, AMAP pcm0: sndbuf_setmap 2a1000, 4000; 0xe7d4e000 -> 2a1000 pcm0: sndbuf_setmap 2a5000, 4000; 0xe7d52000 -> 2a5000 pcm0: sndbuf_setmap 2b0000, 4000; 0xe7d56000 -> 2b0000 pci0: <simple comms> at device 31.6 (no driver attached) psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio2: configured irq 5 not in bitmap of probed irqs 0 sio2: port may not be enabled sio2: irq maps: 0x1 0x1 0x1 0x1 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0 sio3: configured irq 9 not in bitmap of probed irqs 0 sio3: port may not be enabled sio3: irq maps: 0x1 0x1 0x1 0x1 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0 sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 996788887 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH3 chip ata0-master: setting UDMA100 on Intel ICH3 chip ad0: <HITACHI_DK23DA-30/00J1A0G1> ATA-5 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel ICH3 chip acd0: <HL-DT-ST CD-RW GCE-8080N/2.06> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:58605057 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 30005789184 end 30005821439 GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s1b, start 268435456 length 2147483648 end 2415919103 GEOM: Configure ad0s1c, start 0 length 30005789184 end 30005789183 GEOM: Configure ad0s1d, start 2415919104 length 2147483648 end 4563402751 GEOM: Configure ad0s1e, start 4563402752 length 25442386432 end 30005789183 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init procfs registered Linux ELF exec handler installed linprocfs registered pci0: driver added found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 pci0:31:6: reprobing on driver added pci0:31:6: Transition from D0 to D3 pci1: driver added found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:0:0: reprobing on driver added pci2: driver added found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci2:0:0: reprobing on driver added xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO xl0: bpf attached xl0: Ethernet address: 00:06:5b:e4:de:9c xl0: [GIANT-LOCKED] miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: driver added found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 pci0:31:6: reprobing on driver added pci0:31:6: Transition from D0 to D3 pci1: driver added found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1:0:0: reprobing on driver added drm0: <ATI Radeon LY Mobility M6> port 0xc000-0xc0ff mem 0xfcff0000-0xfcffffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized radeon 1.10.0 20020828 on minor 0 pci2: driver added agp0: Setting AGP v2 mode 1 drm0: [MPSAFE] --pZs/OQEoSSbxGlYw Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=sysctl hw.acpi.supported_sleep_state: S1 S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 5 hw.acpi.s4bios: 1 hw.acpi.verbose: 1 hw.acpi.disable_on_poweroff: 0 hw.acpi.reset_video: 1 hw.acpi.cpu.cx_supported: C1/0 C2/50 C3/50 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_history: 14510/0 0/0 0/0 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: 3257 hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: -1 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3732 hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.acline: 1 hw.acpi.battery.life: 146 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 2 hw.acpi.battery.info_expire: 5 --pZs/OQEoSSbxGlYw-- --YkJPYEFdoxh/AXLE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQFAt6w3aUz3f+Zf+XsRArGfAJ4gnIpHVVk/jJzq39hmBo1xVrIaWACeLkJ4 drnrf07coFptcZj41jYnvLI= =sqWB -----END PGP SIGNATURE----- --YkJPYEFdoxh/AXLE--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040528211639.GD25131>