Date: Mon, 1 Nov 1999 20:48:08 -0800 (PST) From: Julian Elischer <julian@whistle.com> To: hackers@freebsd.org Subject: AMD PCnet-FAST+ ethernet chip. Message-ID: <Pine.BSF.4.10.9911012009180.1833-100000@current1.whistle.com>
next in thread | raw e-mail | index | archive | help
Under 3.3R
does anyone have this chip working?
I get the following dmesg info:
lnc1: <PCNet/PCI Ethernet adapter> rev 0x36 int a irq 10 on pci0.5.0
lnc1: PCnet-FAST+ address 00:d0:12:01:04:53
Interestingly no PHY information..
ifconfig says:
# ifconfig lnc1
lnc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 207.76.205.82 netmask 0xffffff00 broadcast 207.76.205.255
ether 00:d0:12:01:04:53
however I get:
# ping 207.76.205.22
PING 207.76.205.l22 (207.76.205.2n2): 56 data bytecs
1: Transmit underflow error -- Resetting
lnc1: Transmit underflow error -- Resetting
lnc1: Transmit underflow error -- Resetting
lnc1: Transmit underflow error -- Resetting
^C
--- 207.76.205.22 ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
netstat -in shows:
# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lnc1 1500 <Link> 00.d0.12.01.04.53 4809 0 17 4 0
lnc1 1500 207.76.205 207.76.205.82 4809 0 17 4 0
The chip on the card is an AM79C972 and the PHY is (If the one
with PHY written on it is the one), an Am79C873KC. The card has home-PNA
on it as well so it's posible the PHY might belong to that.
Looking at the AMD specs that must be the PHY.
The "underflow" messages suggest a DMA/Data transfer problem, does anyone
have any suggestions/experience? If I getthe time I'l hve a read of the driver
too.
julian
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9911012009180.1833-100000>