Date: Wed, 11 Aug 1999 14:25:07 -0700 (PDT) From: Doug <doemill@shocking.com> To: FreeBSD Question <question@blink.dhs.org> Cc: Kenny Drobnack <kdrobnac@mission.mvnc.edu>, Eric Lee Green <elgreen@iname.com>, freebsd-questions@FreeBSD.ORG Subject: Re: Ensoniq AudioPCI Not Werking Message-ID: <Pine.BSI.4.05.9908111418360.22186-100000@fingers.shocking.com> In-Reply-To: <Pine.BSF.4.10.9908111619370.1159-100000@nowcool.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Wel, This didnt work for me either! Here is what i get relating to my sound card in dmesg: es1: <AudioPCI ES1370> rev 0x00 int a irq 9 on pci0.10.0 pcm1: using I/O space register mapping at 0xdcc0 .... pcm0 not found and in my kernel config file for STINKY i have: device pcm0 at isa ? port ? tty irq 9 drq 1 flags 0x0 and if i 'cd /dev ; ./MAKEDEV snd0' then cat /dev/audio i get: root /dev# cat audio cat: audio: Device not configured root /dev# Aug 11 07:22:17 stinky /kernel: pcm0: unit not configured, perhaps you want pcm1 ? Aug 11 07:22:17 stinky /kernel: pcm0: unit not configured, perhaps you want pcm1 ? But if i './MAKEDEV snd1' and cat /dev/audio i get all the garbled garbage like its working, but when i cat an .au to /dev/audio i dont get anything in the speakers, not a pop or anything, any ideas on what im doing wrong? this would be great if i could get it working ps: If i turn 'pnp os' on or off in the bios, it performs the same way, right now its 'off' On Wed, 11 Aug 1999, FreeBSD Question wrote: > Not sure if there are PNP version of Ensoniq AudioPCI(??? sounds weird, > PCI devices don't need pnp0) > but if you turn ON your bios flag "PNP OS Enabled", then probably > it will say it's detected, but LDN1 is disabled. > In that case, you edit your /boot/kernel.conf and put appropriate line > like: > pnp 1 0 os enable port0 0x123 port2 0x124 irq0 9 drq0 1 drq1 3 > (dont use above line..that's an example) > Then it will be enabled. > > If you have "PNP OS" to Disabled in the bios, then things will work > automatically. > > As for the card problem, > IF you are using PCI devices, most likely your snd device will be pcm0 > (which means you do MAKEDEV snd0) > but if you have PNP sound card, then pcm0 is there for the support, and > the kernel will attach pcm1 as the real device. (Later on, it will > complain address that pcm0 is trying to use is already used..ignore this > problem) > and this means you do MAKEDEV snd1 > > My Ensoniq AudioPCI worked perfectly well with this configuration, but my > card might be an old one.. I read somebody mentioned some patch to newer > cards..try that. > > One more thing, DO NOT USE the lines I gave you. I am using 4.0-CURRENT, > and had to get those line from my configuration. > Look into the LINT of your version and get them from YOUR file. > Hope that helps. > > Byung > > On Wed, 11 Aug 1999, Kenny Drobnack wrote: > > > One little problem I noticed on my computer... on the device pcm0 line, > > you need to have a space between "isa" and the ? > > Also, I had to go into my BIOS and turn OFF "Plug 'N PLay OS enabled" > > > > > didnt work for me, on 3.2-R > > > > > > > > > On Wed, 11 Aug 1999, FreeBSD Question wrote: > > > > > > > # Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!). > > > > # You may also wish to enable the pnp controller with this, for pnp > > > > # sound cards. > > > > # > > > > controller pnp0 > > > > device pcm0 at isa? port ? irq 10 drq 1 flags 0x0 > > > > > > > > ------------------------------------------------------- > > > > Once again, put above lines in your kernel config file and go for it. > > > > LINT doesn't tell you specifically what kind of kard Luigi's snd code > > > > supports. it's in the README.cards(?) in the snd directory. > > > > I've done this since 3.X-RELEASE. > > > > Luigi's snd code has been the same since then anyway since he stopped > > > > developing it.(hope I am right??) > > > > > > > > Byung > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > --------------------------------------*******************--------------------------------------- > > | | > > | Kenny Drobnack | > > | Student at Mount Vernon Nazarene College | > > | Major: Computer Science | > > | Minor: Math | > > | Working on: Computer Internship at the Public Library of Mount Vernon and Knox County | > > | | > > ------------------------------------*********************--------------------------------------- > > > > Linux Demo Day '99 > > One Step Closer to World Domination > > One Day, > > One World, > > One Cool Penguin. > > X X > > L IIIIIIIIII N N U U X X > > L I NN N U U X X > > L I N N N U U X X > > L I N N N U U X > > L I N N N U U X X > > L I N N N U U X X > > L I N N N U U X X > > LLLLL IIIIIIIIII N NN UUU X X > > > > --------------------------------------***************************------------------------------ > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > | Doug | unix9.org admin | shocking.com/~doemill/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.05.9908111418360.22186-100000>