Date: Thu, 01 Jul 1999 14:15:20 -0400 From: Dutch Collins <dutch@charm.net> To: FreeBSD-Questions@FreeBSD.ORG Subject: IDE Disk-cannot map bad block-fsbn 0 error Message-ID: <377BB038.B3D9BC19@charm.net>
next in thread | raw e-mail | index | archive | help
Try to save an IDE drive? yeah right. What follows is the boot dmesg
log. I have tried bad144 before but I want to try this:
1) find and map the bad spot using Partition Magic. equals smaller wd2.
2) try bad144 again. After the above step.
3) live with it and rename any file(s) to BAD.BLOCK.ddmmyy
4) new drive
Question; this message (below) tells me to get a new drive because
"fsbn 0" cannot have errors??
wd2: wdcontrol: wdcommand failed reading fsbn 0 (status
ef<busy,rdy,wrtflt,drq,ecc_cor,index,err> error 0)
-----start of dmesg -------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #0: Tue May 18 04:05:08 GMT 1999
jkh@cathair:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Enhanced Am486DX4 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x494 Stepping=4
Features=0x1<FPU>
real memory = 33554432 (32768K bytes)
config> di zp0
config> di ze0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ex0
config> di ep0
config> di ed0
config> di cs0
config> di wt0
config> di scd0
config> di matcdc0
config> di bt0
config> di aha0
config> di adv0
config> q
avail memory = 29405184 (28716K bytes)
Preloaded elf kernel "kernel" at 0xc0358000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035809c.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1060 device=8881)> rev 0x04 on
pci0.16.0
chip1: <PCI to ISA bridge (vendor=1060 device=886a)> rev 0x0e on
pci0.18.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x10 on pci0.18.1
Probing for PnP devices:
PnP device failed to report resource data
CSN 1 Vendor ID: ZTIa001 [0x01a0896a] Serial 0x00000101 Comp ID: @@@0000
[0x00000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <JTS Corp. CHAMP Model C1000-2AF>
wd0: 955MB (1957536 sectors), 1942 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <FX810T4/a03>, removable, intr, dma, iordis
acd0: drive speed 1377KB/sec, 256KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <Seagate Technology ST157A>
wd2: 42MB (87360 sectors), 560 cyls, 6 heads, 26 S/T, 512 B/S
mcd0 not found at 0x300
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s2a
wd2: wdcontrol: wdcommand failed reading fsbn 0 (status
ef<busy,rdy,wrtflt,drq,ecc_cor,index,err> error 0)
cd9660: RockRidge Extension
wd0s2f: hard error reading fsbn 736278 of 736272-736287 (wd0s2 bn
1000902; cn 387 tn 20 sn 21) (status 59<rdy,seekdone,drq,err> error
40<uncorr>)
wd0s2f: hard error reading fsbn 735702 of 735680-735823 (wd0s2 bn
1000326; cn 387 tn 11 sn 12) (status 59<rdy,seekdone,drq,err> error
40<uncorr>)
wd0s2f: hard error reading fsbn 735702 of 735696-735823 (wd0s2 bn
1000326; cn 387 tn 11 sn 12) (status 59<rdy,seekdone,drq,err> error
40<uncorr>)
wd0s2f: hard error reading fsbn 735702 of 735696-735711 (wd0s2 bn
1000326; cn 387 tn 11 sn 12) (status 59<rdy,seekdone,drq,err> error
40<uncorr>)
-------end of dmsg ------
thanks -dutch
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?377BB038.B3D9BC19>