Date: Mon, 23 Feb 2004 11:38:36 +0100 From: "Fabrice Streicher" <fabrice.streicher@wanadoo.fr> To: <aic7xxx@freebsd.org> Subject: another aic7xxx_abort returns 0x2002 Message-ID: <000a01c3f9f9$31bba5a0$5a00a8c0@wanadoo.fr>
next in thread | raw e-mail | index | archive | help
Hello,
=20
I have big problem for backup data with SCSI Card Adaptec 19160LP.
My configuration is:
* 1 xSeries IBM 225
* 2 Adaptec for LTO-2 drives
* 1 3583 IBM with 2 LTO-2 drives and 72 slots (1 drive for 1
19160)
* Linux RedHat 8.0 kernel 2.4.22
=20
When my full backup start lots errors appear on dmesg.
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi3:0:1:1: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi3:0:1:1: Attempting to queue a TARGET RESET message
CDB: 0x0 0x20 0x0 0x0 0x0 0x0
scsi3:0:1:1: Command not found
aic7xxx_dev_reset returns 0x2002
scsi3:0:1:1: Attempting to queue an ABORT message
CDB: 0x0 0x20 0x0 0x0 0x0 0x0
Infinite interrupt loop, INTSTAT =3D 0scsi3: At time of recovery, card =
was
not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi3: Dumping Card State while idle, at SEQADDR 0x18
Card was paused
ACCUM =3D 0x4, SINDEX =3D 0x48, DINDEX =3D 0xe4, ARG_2 =3D 0x1
HCNT =3D 0x0 SCBPTR =3D 0x0
SCSIPHASE[0x0] SCSISIGI[0x18] ERROR[0x0] SCSIBUSL[0x0]=20
LASTPHASE[0x1] SCSISEQ[0x1a] SBLKCTL[0xa] SCSIRATE[0x0]=20
SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x10] SSTAT1[0x8]=20
SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]=20
SXFRCTL0[0x80] DFCNTRL[0x0] DFSTATUS[0x89]=20
STACK: 0x0 0x163 0x178 0x17
SCB count =3D 5
Kernel NEXTQSCB =3D 2
Card NEXTQSCB =3D 4
QINFIFO entries: 4=20
Waiting Queue entries:=20
Disconnected Queue entries:=20
QOUTFIFO entries:=20
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 28 29 30 31=20
Sequencer SCB Info:=20
0 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x1] SCB_TAG[0xff]=20
1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]=20
Pending list:=20
4 SCB_CONTROL[0x40] SCB_SCSIID[0x17] SCB_LUN[0x1]=20
Kernel Free SCB list: 3 1 0=20
Untagged Q(1): 4=20
DevQ(0:1:0): 0 waiting
DevQ(0:1:1): 0 waiting
=20
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi3:0:1:1: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
st0: Error with sense data: Current st09:00: sense key Illegal Request
Additional sense indicates Medium removal prevented
st0: Error with sense data: Current st09:00: sense key Illegal Request
Additional sense indicates Medium removal prevented
st0: Error with sense data: Current st09:00: sense key Illegal Request
Additional sense indicates Medium removal prevented
=20
Did you have an answer about this problem ?
Thanks for your ansmer.
Best Regards
Fabrice Streicher
=20
=20
=20
*******************************************************
Fabrice STREICHER =20
=20
MORSE =20
Parc Tertiaire Val Parc =20
3 Rue du Parc =20
67088 STRASBOURG Cedex 2 =20
=20
T=E9l : 03.90.20.56.60 =20
Fax : 03.90.20.56.65 =20
email : fabrice.streicher@morse.com
=20
web : http://fr.morse.com
******************************************************** =20
=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01c3f9f9$31bba5a0$5a00a8c0>