Date: Wed, 18 Sep 2002 18:40:52 GMT From: abc@anchorageinternet.org To: Adam Weinberger <adam@vectors.cx> Subject: Re: mass storage Message-ID: <200209181840.g8IIeq5l039424@en26.groggy.anc.acsalaska.net>
next in thread | raw e-mail | index | archive | help
> the umass(4) drivers work perfectly for me and my digital camera and > smartmedia cardreader. > > what isn't working for you? > > -Adam i had an Olympus D-150, it only worked once per boot/mount (would not mount after a umount unless kernel was rebooted), currently i have a Toshiba PDR-M25, which claims to be "USB auto connect" and "Universal Mass Storage" compatible as well: [i would be happy to provide additional info if i can be of better assistance to any umass developers ...] scsi_da.c - default: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #1: Thu Jan 1 06:19:46 AKST 1998 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 167046230 Hz CPU: Cyrix 6x86MX (167.05-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0752 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 33554432 (32768K bytes) avail memory = 29736960 (29040K bytes) Preloaded elf kernel "kernel" at 0xc0309000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc030909c. Using $PIR table, 6 entries at 0xc00fd980 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0 atapci0: ATA channel disabled by BIOS pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 15 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 atapci1: <Promise ATA100 controller> port 0x7800-0x783f,0x7400-0x7403,0x7000-0x7007,0x6c00-0x6c03,0x6800-0x6807 mem 0xe4000000-0xe401ffff irq 11 at device 17.0 on pci0 ata2: at 0x6800 on atapci1 ata3: at 0x7000 on atapci1 ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xe4020000-0xe4020fff irq 10 at device 18.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: Toshiba PDR-M25, rev 1.10/1.00, addr 2 pci0: <S3 968 graphics accelerator> at 19.0 irq 12 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 sc0: <System console> on isa0 sc0: VGA <9 virtual consoles, flags=0x200> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A ed0 at port 0x340-0x35f irq 5 on isa0 ed0: address 00:40:33:3b:d9:77, type NE2000 (16 bit) fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad4: DMA limited to UDMA33, non-ATA66 cable or device ad4: 38166MB <WDC WD400AB-22CDB0> [77545/16/63] at ata2-master UDMA33 acd0: CDROM <FX3400S> at ata2-slave PIO4 umass0: BBB reset failed, STALLED age repeated 4 times Mounting root from ufs:/dev/ad4a da0 at umass-sim0 bus 0 target 0 lun 0 da0: <TOSHIBA M25 1.00> Removable Direct Access SCSI-0 device da0: 650KB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED da0: reading primary partition table: error reading fsbn 0 umass0: BBB reset failed, STALLED (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x10, scsi status == 0x0 umass0: BBB reset failed, STALLED age repeated 2 times da0: reading primary partition table: error reading fsbn 0 umass0: BBB reset failed, STALLED (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x10, scsi status == 0x0 umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED da0: reading primary partition table: error reading fsbn 0 umass0: BBB reset failed, STALLED (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x10, scsi status == 0x0 umass0: BBB reset failed, STALLED age repeated 2 times da0: reading primary partition table: error reading fsbn 0 umass0: BBB reset failed, STALLED (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x10, scsi status == 0x0 umass0: BBB reset failed, STALLED scsi_da.c - DA_Q_NO_SYNC_CACHE: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #3: Wed Sep 18 01:46:14 AKDT 2002 abc@en27.groggy.anc.acsalaska.net:/usr/src/sys/compile/MYKERN Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 167046227 Hz CPU: Cyrix 6x86MX (167.05-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0752 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 33554432 (32768K bytes) avail memory = 29736960 (29040K bytes) Preloaded elf kernel "kernel" at 0xc0309000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc030909c. Using $PIR table, 6 entries at 0xc00fd980 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0 atapci0: ATA channel disabled by BIOS pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 15 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 atapci1: <Promise ATA100 controller> port 0x7800-0x783f,0x7400-0x7403,0x7000-0x7007,0x6c00-0x6c03,0x6800-0x6807 mem 0xe4000000-0xe401ffff irq 11 at device 17.0 on pci0 ata2: at 0x6800 on atapci1 ata3: at 0x7000 on atapci1 ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xe4020000-0xe4020fff irq 10 at device 18.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: Toshiba PDR-M25, rev 1.10/1.00, addr 2 pci0: <S3 968 graphics accelerator> at 19.0 irq 12 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 sc0: <System console> on isa0 sc0: VGA <9 virtual consoles, flags=0x200> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A ed0 at port 0x340-0x35f irq 5 on isa0 ed0: address 00:40:33:3b:d9:77, type NE2000 (16 bit) fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad4: DMA limited to UDMA33, non-ATA66 cable or device ad4: 38166MB <WDC WD400AB-22CDB0> [77545/16/63] at ata2-master UDMA33 acd0: CDROM <FX3400S> at ata2-slave PIO4 umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED Mounting root from ufs:/dev/ad4a da0 at umass-sim0 bus 0 target 0 lun 0 da0: <TOSHIBA M25 1.00> Removable Direct Access SCSI-0 device da0: 650KB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) scsi_da.c - DA_Q_NO_6_BYTE|DA_Q_NO_SYNC_CACHE: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #2: Sun Sep 15 15:20:48 AKDT 2002 root@en27.groggy.anc.acsalaska.net:/usr/src/sys/compile/MYKERN Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 167046313 Hz CPU: Cyrix 6x86MX (167.05-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0752 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 33554432 (32768K bytes) avail memory = 29736960 (29040K bytes) Preloaded elf kernel "kernel" at 0xc0309000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc030909c. Using $PIR table, 6 entries at 0xc00fd980 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0 atapci0: ATA channel disabled by BIOS pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 15 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 atapci1: <Promise ATA100 controller> port 0x7800-0x783f,0x7400-0x7403,0x7000-0x7007,0x6c00-0x6c03,0x6800-0x6807 mem 0xe4000000-0xe401ffff irq 11 at device 17.0 on pci0 ata2: at 0x6800 on atapci1 ata3: at 0x7000 on atapci1 ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xe4020000-0xe4020fff irq 10 at device 18.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: Toshiba PDR-M25, rev 1.10/1.00, addr 2 pci0: <S3 968 graphics accelerator> at 19.0 irq 12 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 sc0: <System console> on isa0 sc0: VGA <9 virtual consoles, flags=0x200> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A ed0 at port 0x340-0x35f irq 5 on isa0 ed0: address 00:40:33:3b:d9:77, type NE2000 (16 bit) fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad4: DMA limited to UDMA33, non-ATA66 cable or device ad4: 38166MB <WDC WD400AB-22CDB0> [77545/16/63] at ata2-master UDMA33 acd0: CDROM <FX3400S> at ata2-slave PIO4 umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED umass0: BBB reset failed, STALLED Mounting root from ufs:/dev/ad4a da0 at umass-sim0 bus 0 target 0 lun 0 da0: <TOSHIBA M25 1.00> Removable Direct Access SCSI-0 device da0: 650KB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR > >> (09.17.2002 @ 1509 PST): abc@anchorageinternet.org said, in 0.8K: << > > i would like to know if "USB auto-connect" "Universal Mass Storage" > > drivers plan to be fully functional at the end of the 4.x FBSD > > release development. it is my experience that the drivers > > are functionally broken in many instances, and it is my > > understanding that these are published "standards", and > > that all such devices implementing these standards > > should work with the same drivers without problems. > > > > does anyone know of the development plans for these drivers/devices? > > i am asking not only for myself, but also to relate this information > > to others (non-technical ex-windows users) that use freebsd and would > > like to know as well (so they can plan on buying digital cameras, etc). > > > > thank you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200209181840.g8IIeq5l039424>