Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 14 Aug 2002 23:58:06 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        Marco Molteni <molter@tin.it>
Cc:        freebsd-net@freebsd.org
Subject:   Re: 4-port PCI ethernet card?
Message-ID:  <9g9mluogtircgc6hvj0blhth6iflrmd3pv@4ax.com>
In-Reply-To: <20020814163205.22941.qmail@cobweb.example.org>
References:  <20020814163205.22941.qmail@cobweb.example.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 14 Aug 2002 18:32:05 +0200, in sentex.lists.freebsd.net you =
wrote:

>Hi,
>
>could you suggest/comment on 2-port or 4-port ethernet cards that work =
with
>FreeBSD -stable?

Dlink DFE-580TX. Works quite well. I have it in my news server which =
pushes
over 30Mb/s sustained on 3 of the 4 links.

http://www.dlink.com/products/adapters/dfe580tx/

uses the dc driver. Plays well with other devices in the same box =
(adaptec
SCSI and 3ware IDE RAID)

dc0: <Intel 21143 10/100BaseTX> port 0xa800-0xa87f mem
0xf6800000-0xf68003ff irq 12 at device 4.0 on pci2
dc0: Ethernet address: 00:80:c8:cd:35:9d
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: <Intel 21143 10/100BaseTX> port 0xa400-0xa47f mem
0xf6000000-0xf60003ff irq 11 at device 5.0 on pci2
dc1: Ethernet address: 00:80:c8:cd:35:9e
miibus1: <MII bus> on dc1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc2: <Intel 21143 10/100BaseTX> port 0xa000-0xa07f mem
0xf5800000-0xf58003ff irq 5 at device 6.0 on pci2
dc2: Ethernet address: 00:80:c8:cd:35:9f
miibus2: <MII bus> on dc2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc3: <Intel 21143 10/100BaseTX> port 0x9800-0x987f mem
0xf5000000-0xf50003ff irq 10 at device 7.0 on pci2
dc3: Ethernet address: 00:80:c8:cd:35:a0
miibus3: <MII bus> on dc3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

	--Mike
Mike Tancsa  (mdtancsa@sentex.net)	=09
Sentex Communications Corp,   	=09
Waterloo, Ontario, Canada
"Given enough time, 100 monkeys on 100 routers=20
could setup a national IP network." (KDW2)

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9g9mluogtircgc6hvj0blhth6iflrmd3pv>