Date: Tue, 16 May 2006 11:16:21 -0700 From: "Ted Mittelstaedt" <tedm@toybox.placo.com> To: "fbsd" <fbsd@aanet.com.au>, <freebsd-questions@freebsd.org> Subject: RE: Help to find cause of recurring crash Message-ID: <LOBBIFDAGNMAMLGJJCKNCEPGFDAA.tedm@toybox.placo.com> In-Reply-To: <4469B2E0.90408@aanet.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Ron, Is this the HP Vectra server that has the onboard Adaptec SCSI controller, and are you running SCSI drives on it? If so, there's another guy that has one of these servers and was complaining about bugs in the adaptec driver sometime last year causing a similar issue. I told him to send-pr it but I don't think anything came of that. I would say you have a 80% chance it's what they call: "non-compliant hardware" It is well known that HP has a microcode license from Adaptec, they and Compaq have modified Adaptec's microcode before. It is really annoying when they do it and put their modded microcode into Adaptec's cards - I have had before on my desk, 2 identical Adaptec SCSI cards, that when both placed in a Compaq desktop will boot up with identical firmware version numbers with one exception - one of them has a trailing "S" on the firmware version number - and both work exactly the same in the Compaq, yet take the Adaptec card that was purchased from retail and put it in another system and it works fine, but take the adaptec card that was purchased from Compaq/HP spares and it will not work in any other system. It's enough to piss off an idiot. Ted >-----Original Message----- >From: owner-freebsd-questions@freebsd.org >[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of fbsd >Sent: Tuesday, May 16, 2006 4:09 AM >To: freebsd-questions@freebsd.org >Subject: Help to find cause of recurring crash > > >Hello All, > >I'm running a home email server and twice in the last week it has >rebooted itself and been unable to restart due to corruption of the >filesystem. I found the following in /var/log/messages > >May 16 17:46:07 hpvectra syslogd: kernel boot file is >/boot/kernel/kernel >May 16 17:46:07 hpvectra kernel: >May 16 17:46:07 hpvectra kernel: >May 16 17:46:07 hpvectra kernel: Fatal trap 12: page fault while in >kernel mode >May 16 17:46:07 hpvectra kernel: fault virtual address = 0x1c >May 16 17:46:07 hpvectra kernel: fault code = supervisor write, >page not present >May 16 17:46:07 hpvectra kernel: instruction pointer = >0x20:0xc062c5e8 >May 16 17:46:07 hpvectra kernel: stack pointer = >0x28:0xe5079c50 >May 16 17:46:07 hpvectra kernel: frame pointer = >0x28:0xe5079c64 >May 16 17:46:07 hpvectra kernel: code segment = base 0x0, limit >0xfffff, type 0x1b >May 16 17:46:07 hpvectra kernel: = DPL 0, pres 1, def32 1, gran 1 >May 16 17:46:07 hpvectra kernel: processor eflags = interrupt >enabled, resume, IOPL = 0 >May 16 17:46:07 hpvectra kernel: current process = 52 (vnlru) >May 16 17:46:07 hpvectra kernel: trap number = 12 >May 16 17:46:07 hpvectra kernel: panic: page fault >May 16 17:46:07 hpvectra kernel: Uptime: 5d7h4m50s >May 16 17:46:07 hpvectra kernel: Dumping 1023 MB (2 chunks) >May 16 17:46:07 hpvectra kernel: chunk 0: 1MB (159 pages) ... ok >May 16 17:46:07 hpvectra kernel: chunk 1: 1023MB (261872 pages) >1007 991 >975 959 943 927 911 895 879 863 847 831 815 799 783 767 751 735 719 703 >687 671 655 639 623 607 591 575 559 543 527 511 495 479 463 447 431 415 >399 383 367 351 335 319 303 287 271 255 239 223 207 191 175 159 143 127 >111 95 79 63 47 31 15 ... ok >May 16 17:46:07 hpvectra kernel: >May 16 17:46:07 hpvectra kernel: Dump complete >May 16 17:46:07 hpvectra kernel: Automatic reboot in 15 seconds - press >a key on the console to abort >May 16 17:46:07 hpvectra kernel: Rebooting... > >When I turn on the monitor I see that the reboot has not been >successful >due to "/ was not properly dismounted" and it is asking for fsck to be >run manually. When I do that everything is fine again. > >Can anybody help me find the cause of the crash? What extra information >is needed and how do I find that information? I'm relatively >new to FreeBSD. > >Thanks in advance, > >Ron > > > >PS Other information that may be of help: > >I'm running 6.0 release, >X is not running >no users are logged in, cursor sits at the login screen >running programs include, fetchmail daemon, dovecot, procmail, >clamassassin, clamd, >only strange behaviour noted is the following error messages > >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49H9AXd016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49H9Ahr016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49H9Amm016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49H9A5E016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49H9AHZ016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49Hlokm016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49HrgQC016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk49HrgiD016830: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk45HuHZj028031: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk45H9Q8H028031: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk45H9QIF028031: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk45H9Q2k028031: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk45H9Q3g028031: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk45H9Q8I028031: No such file or directory >May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44HetDK015554: No such file or directory >May 11 03:02:52 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44HkTLo015554: No such file or directory >May 11 03:02:53 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44HuiTU015554: No such file or directory >May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44IA0GF016123: No such file or directory >May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44Ho0tW015927: No such file or directory >May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44I00DB016025: No such file or directory >May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >cannot open ./dfk44Ht0gL015964: No such file or directory >May 11 03:06:08 hpvectra sendmail[5909]: k49H9AXd016830: SYSERR(root): >readqf: cannot open ./dfk49H9AXd016830: No such file or directory >May 11 03:06:12 hpvectra sendmail[5909]: k49H9Ahr016830: SYSERR(root): >readqf: cannot open ./dfk49H9Ahr016830: No such file or directory >May 11 03:06:12 hpvectra sendmail[5909]: k49H9Amm016830: SYSERR(root): >readqf: cannot open ./dfk49H9Amm016830: No such file or directory >May 11 03:06:12 hpvectra sendmail[5909]: k49H9A5E016830: SYSERR(root): >readqf: cannot open ./dfk49H9A5E016830: No such file or directory >May 11 03:06:12 hpvectra sendmail[5909]: k49H9AHZ016830: SYSERR(root): >readqf: cannot open ./dfk49H9AHZ016830: No such file or directory >May 11 03:06:20 hpvectra sendmail[5909]: k49Hlokm016830: SYSERR(root): >readqf: cannot open ./dfk49Hlokm016830: No such file or directory >May 11 03:06:31 hpvectra sendmail[5909]: k49HrgQC016830: SYSERR(root): >readqf: cannot open ./dfk49HrgQC016830: No such file or directory >May 11 03:06:32 hpvectra sendmail[5909]: k49HrgiD016830: SYSERR(root): >readqf: cannot open ./dfk49HrgiD016830: No such file or directory >May 11 03:06:33 hpvectra sendmail[5909]: k45HuHZj028031: SYSERR(root): >readqf: cannot open ./dfk45HuHZj028031: No such file or directory >May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q8H028031: SYSERR(root): >readqf: cannot open ./dfk45H9Q8H028031: No such file or directory >May 11 03:06:33 hpvectra sendmail[5909]: k45H9QIF028031: SYSERR(root): >readqf: cannot open ./dfk45H9QIF028031: No such file or directory >May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q2k028031: SYSERR(root): >readqf: cannot open ./dfk45H9Q2k028031: No such file or directory >May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q3g028031: SYSERR(root): >readqf: cannot open ./dfk45H9Q3g028031: No such file or directory >May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q8I028031: SYSERR(root): >readqf: cannot open ./dfk45H9Q8I028031: No such file or directory >May 11 03:06:34 hpvectra sendmail[5909]: k44HetDK015554: SYSERR(root): >readqf: cannot open ./dfk44HetDK015554: No such file or directory >May 11 03:07:52 hpvectra sendmail[5909]: k44HkTLo015554: SYSERR(root): >readqf: cannot open ./dfk44HkTLo015554: No such file or directory >May 11 03:08:53 hpvectra sendmail[5909]: k44HuiTU015554: SYSERR(root): >readqf: cannot open ./dfk44HuiTU015554: No such file or directory >May 11 03:12:12 hpvectra sendmail[5909]: k44IA0GF016123: SYSERR(root): >readqf: cannot open ./dfk44IA0GF016123: No such file or directory >May 11 03:12:12 hpvectra sendmail[5909]: k44Ho0tW015927: SYSERR(root): >readqf: cannot open ./dfk44Ho0tW015927: No such file or directory >May 11 03:12:12 hpvectra sendmail[5909]: k44I00DB016025: SYSERR(root): >readqf: cannot open ./dfk44I00DB016025: No such file or directory > >however I have "sendmail_enable="NONE"" in /etc/rc.conf so sendmail >shouldn't be working. > > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to >"freebsd-questions-unsubscribe@freebsd.org" > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.392 / Virus Database: 268.5.6/340 - Release Date: 5/15/2006 >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LOBBIFDAGNMAMLGJJCKNCEPGFDAA.tedm>