Date: Mon, 20 Mar 2006 09:04:09 -0700 (MST) From: "M. Warner Losh" <imp@bsdimp.com> To: anderson@centtech.com Cc: freebsd-current@freebsd.org Subject: Re: Seagate 4GB CF drive in pccard slot won't work Message-ID: <20060320.090409.21564375.imp@bsdimp.com> In-Reply-To: <441EBC32.2070508@centtech.com> References: <441B2718.1010909@centtech.com> <20060317.163209.48485772.imp@bsdimp.com> <441EBC32.2070508@centtech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In message: <441EBC32.2070508@centtech.com>
Eric Anderson <anderson@centtech.com> writes:
: Warner Losh wrote:
: >> I'm running the latest 6.1-*, and inserting a cf->pccard reader with a
: >> 4GB seagate cf drive installed gives me these messages:
: >>
: >> cbb0: ready never happened, status = 0d
: >> pcib3: pccard0 requested memory range 0xdfb00000-0xdfbfffff: good
: >> pccard0: Card has no functions!
: >> cbb0: PC Card card activation failed
: >>
: >
: > Something bad happened on the way to the forum... Please set
: > hw.cbb.debug=1 and hw.pccard.debug=1 and try again.
: >
:
: Here's the latest snippet from /var/log/messages with those two set:
:
: Mar 20 08:27:47 neutrino kernel: Status is 0x30001911
: Mar 20 08:27:47 neutrino kernel: cbb0: card inserted: event=0x00000000,
: state=30001911
: Mar 20 08:27:47 neutrino kernel: pccard0: chip_socket_enable
: Mar 20 08:27:47 neutrino kernel: cbb_pcic_socket_enable:
: Mar 20 08:27:47 neutrino kernel: cbb0: cbb_power: 2V
: Mar 20 08:27:47 neutrino kernel: cbb0: ready never happened, status = 0d
: Mar 20 08:27:47 neutrino kernel: pccard0: read_cis
: Mar 20 08:27:47 neutrino kernel: pcib3: pccard0 requested memory range
: 0xdfb00000-0xdfbfffff: good
: Mar 20 08:27:47 neutrino kernel: pccard0: check_cis_quirks
: Mar 20 08:27:47 neutrino kernel: pccard0: Card has no functions!
: Mar 20 08:27:47 neutrino kernel: cbb0: PC Card card activation failed
:
:
: Anything else I can provide?
:
: Also - when inserting this card in the slot, my system freezes for about
: 5-6 seconds.
hw.pccard.cis_debug=1 may help.
The 2V cbb power looks very wrong, however...
Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060320.090409.21564375.imp>