Date: Tue, 31 Aug 1999 17:23:05 -0400 (EDT) From: "Lee A. Butler" <butler@ARL.MIL> To: freebsd-mobile@freebsd.org Cc: pao-report@clave.gr.jp Subject: Card Support Message-ID: <Pine.SGI.3.95.990831164022.26131A-100000@cad.arl.mil>
next in thread | raw e-mail | index | archive | help
I have an IBM Thinkpad 600 and a 3Com combo Ethernet/modem card. I'd like to be able to use the Ethernet interface if I can. The card is a labeled 3CXEM556 B 10M Ethernet Lan + 56K modem I have successfully used other cards in this machine. I've installed PAO3-19990809 and tried the 3CCFEM556BI configuration with no success. Is there any hope? Running "pccardc dumpcis" reports: Code 128 not found Code 128 not found code Unknown ignored Code 131 not found Code 131 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 45 000: 05 00 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a 010: 20 33 43 58 45 4d 35 35 36 20 42 00 4c 41 4e 20 020: 2b 20 35 36 6b 20 4d 6f 64 65 6d 00 ff Version = 5.0, Manuf = [3Com], card vers = [Megahertz 3CXEM556 B] Addit. info = [LAN + 56k Modem] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 35 00 PCMCIA ID = 0x101, OEM ID = 0x35 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x1a (Configuration map), length = 6 000: 05 07 00 08 63 00 Reg len = 2, config register addr = 0x800, last config = 0x7 Registers: XX---XX- -------- Tuple #6, code = 0x1b (Configuration entry), length = 17 000: c7 01 1d 71 55 c6 46 c6 46 6d e0 72 5d 64 30 ff 010: ff Config index = 0x7(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 4 x 100mA, ext = 0x46 Max current average over 10 ms: 4 x 100mA, ext = 0x46 Power down supply current: 7 x 10mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 5.0 x 100 us Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #7, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #8, code = 0x0 (Null tuple), length = 10 000: 02 01 35 00 2f 02 04 00 00 ff Tuple #9, code = 0x0 (Null tuple), length = 14 000: 31 30 38 42 31 37 35 38 35 34 57 50 00 ff Tuple #10, code = 0x14 (No link), length = 0 Tuple #11, code = 0x10 (Checksum), length = 5 000: 84 ff 85 00 00 Checksum from offset 65412, length 133, value is 0x0 Tuple #12, code = 0xff (Terminator), length = 0 2 slots found Lee A. Butler Internet: butler@arl.mil Attn: AMSRL-SL-BE Phone: (410) 278-9200 U.S. Army Research Laboratory DSN: 298-9200 Aberdeen Proving Ground, MD 21005-5068 FAX: (410) 278-5058 As nightfall does not come at once, neither does oppression. In both instances, there is a twilight when everything remains seemingly unchanged. And it is in such twilight that we all must be most aware of change in the air--however slight--lest we become unwitting victims of the darkness. --- Justice William O. Douglas To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SGI.3.95.990831164022.26131A-100000>