From owner-freebsd-current@FreeBSD.ORG Sat Oct 29 13:41:08 2005 Return-Path: X-Original-To: current@freebsd.org Delivered-To: freebsd-current@FreeBSD.ORG Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 851AA16A41F for ; Sat, 29 Oct 2005 13:41:08 +0000 (GMT) (envelope-from victor@bsdes.net) Received: from alf.dyndns.ws (244.Red-217-126-240.staticIP.rima-tde.net [217.126.240.244]) by mx1.FreeBSD.org (Postfix) with ESMTP id 75F9743D45 for ; Sat, 29 Oct 2005 13:41:03 +0000 (GMT) (envelope-from victor@bsdes.net) Received: from alf.dyndns.ws (pato.euesrg02.net [192.168.0.3]) by alf.dyndns.ws (8.13.1/8.13.1) with ESMTP id j9TDf1pA040840 for ; Sat, 29 Oct 2005 15:41:02 +0200 (CEST) (envelope-from victor@bsdes.net) Date: Sat, 29 Oct 2005 15:41:00 +0200 From: Victor Balada Diaz To: current@freebsd.org Message-ID: <20051029134100.GA615@pato.euesrg02.net> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="7AUc2qLy4jB3hD7Z" Content-Disposition: inline User-Agent: Mutt/1.4.2.1i Cc: Subject: FreeBSD 6.0 -RC1 doesn't detect my hard drive X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 29 Oct 2005 13:41:08 -0000 --7AUc2qLy4jB3hD7Z Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi, i'm trying to install FreeBSD 6.0-RC1 on a Sony Vaio VGN-S4XP and it doesn't detect de hard disk. It works on FreeBSD 5.4. Booting FreeBSD 6.0 with acpi enabled detects the cd but not the HD, without acpi or in safe mode panics: with acpi disabled or in safe mode (copied by hand): Fatal trap 9: general protection fault while in kernel mode instruction pointer = 0x70:0x81ea stack pointer = 0x28:0xeb8 frame pointer = 0x28:0xf0e code segment = base 0xc00f0000, limit 0xffff, type 0x1b = DPL 0, pres 1, def32 0, gran 0 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) [thread pid 0 tid 0] Stopped at 0x81ea: *** error reading from address 81ea *** db> bt Tracing pid 0 tid 0 td 0xc0a0d360 (null)(f76cb06,0,3e203e20,f80,bec7000) at 0x81ea db> pciconf -lv from FreeBSD 5.4: hostb0@pci0:0:0: class=0x060000 card=0x81b7104d chip=0x25908086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000088 chip=0x25918086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI none0@pci0:27:0: class=0x040300 card=0x81cc104d chip=0x26688086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW Intel High Deficition Audio Controller' class = multimedia uhci0@pci0:29:0: class=0x0c0300 card=0x81b9104d chip=0x26588086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x81b9104d chip=0x26598086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x81b9104d chip=0x265a8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB uhci3@pci0:29:3: class=0x0c0300 card=0x81b9104d chip=0x265b8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB UHCI Controller' class = serial bus subclass = USB none1@pci0:29:7: class=0x0c0320 card=0x81b9104d chip=0x265c8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib2@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd3 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x81b9104d chip=0x26418086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FBM ICH6M LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x81b9104d chip=0x266f8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB ICH6 Ultra ATA Storage Controller' class = mass storage subclass = ATA atapci1@pci0:31:2: class=0x01018f card=0x81ba104d chip=0x26538086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FBM ICH6M SATA Controller' class = mass storage subclass = ATA none2@pci0:31:3: class=0x0c0500 card=0x81b9104d chip=0x266a8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW SMBus Controller' class = serial bus subclass = SMBus none3@pci1:0:0: class=0x030000 card=0x81c9104d chip=0x016710de rev=0xa1 hdr=0x00 vendor = 'NVIDIA Corporation' class = display subclass = VGA cbb0@pci6:5:0: class=0x060700 card=0x818f104d chip=0xac8e104c rev=0x00 hdr=0x02 vendor = 'Texas Instruments (TI)' class = bridge subclass = PCI-CardBus fwohci0@pci6:5:2: class=0x0c0010 card=0x818f104d chip=0x802e104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' class = serial bus subclass = FireWire none4@pci6:5:3: class=0x018000 card=0x8190104d chip=0xac8f104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' class = mass storage fxp0@pci6:8:0: class=0x020000 card=0x81d0104d chip=0x10688086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet none5@pci6:11:0: class=0x028000 card=0x27538086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'PRO/Wireless 2200BG Network Connection' class = network verbose boot from FreeBSD 5.4 attached. -- La prueba mas fehaciente de que existe vida inteligente en otros planetas, es que no han intentado contactar con nosotros. --7AUc2qLy4jB3hD7Z Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3630c. Table 'FACP' at 0x3fe9ce78 Table 'APIC' at 0x3fe9cefc MADT: Found table at 0x3fe9cefc APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled MADT: Found CPU APIC ID 1 ACPI ID 1: disabled ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193180 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1995014303 Hz CPU: Intel(R) Pentium(R) M processor 2.00GHz (1995.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff real memory = 1072234496 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000003ec65fff, 1040453632 bytes (254017 pages) avail memory = 1039708160 (991 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6800 bios32: Entry = 0xfd6a0 (c00fd6a0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6a0+0x271 pnpbios: Found PnP BIOS data at 0xc00f6850 pnpbios: Entry = f0000:be9b Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high MADT: Ignoring local NMI routed to ACPI CPU 1 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 6 dev 5 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_ec0: port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 70 us acpi_ec0: info: new max delay is 80 us ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 unknown: not probed (disabled) cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2591, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 map[10]: type 1, range 64, base 80000000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2668, revid=0x03 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=19 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2658, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2659, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=19 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 21 found-> vendor=0x8086, dev=0x265a, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=21 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x265b, revid=0x03 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 map[10]: type 1, range 32, base 80004000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x265c, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=23 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0xd3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2641, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001880, size 4, enabled found-> vendor=0x8086, dev=0x266f, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[10]: type 4, range 32, base 000018c0, size 3, enabled map[14]: type 4, range 32, base 000018b8, size 2, enabled map[18]: type 4, range 32, base 000018b0, size 3, enabled map[1c]: type 4, range 32, base 00001894, size 2, enabled map[20]: type 4, range 32, base 000018a0, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2653, revid=0x03 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=18 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 000018e0, size 5, enabled found-> vendor=0x8086, dev=0x266a, revid=0x03 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0x90000000-0xafffffff pcib1: prefetched decode 0xc0000000-0xcfffffff ACPI PCI link initial configuration: pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base a0000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xa0000000-0xa0ffffff map[14]: type 3, range 64, base c0000000, size 28, enabled pcib1: device (null) requested decoded memory range 0xc0000000-0xcfffffff map[1c]: type 1, range 64, base 90000000, size 24, enabled pcib1: device (null) requested decoded memory range 0x90000000-0x90ffffff pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x10de, dev=0x0167, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci1: at device 0.0 (no driver attached) pci0: at device 27.0 (no driver attached) uhci0: port 0x1800-0x181f irq 17 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1840-0x185f irq 21 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x1860-0x187f irq 17 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pcib2: secondary bus 6 pcib2: subordinate bus 7 pcib2: I/O decode 0x2000-0x2fff pcib2: memory decode 0xb0000000-0xb00fffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: pci6: on pcib2 pci6: physical bus=6 map[10]: type 1, range 32, base 00000000, size 12, enabled pcib2: matched entry for 6.5.INTA pcib2: slot 5 INTA hardwired to IRQ 21 found-> vendor=0x104c, dev=0xac8e, revid=0x00 bus=6, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0004000, size 11, enabled pcib2: device (null) requested decoded memory range 0xb0004000-0xb00047ff map[14]: type 1, range 32, base b0000000, size 14, enabled pcib2: device (null) requested decoded memory range 0xb0000000-0xb0003fff pcib2: matched entry for 6.5.INTC pcib2: slot 5 INTC hardwired to IRQ 20 found-> vendor=0x104c, dev=0x802e, revid=0x00 bus=6, slot=5, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=c, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0005000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb0005000-0xb0005fff pcib2: matched entry for 6.5.INTB pcib2: slot 5 INTB hardwired to IRQ 23 found-> vendor=0x104c, dev=0xac8f, revid=0x00 bus=6, slot=5, func=3 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=b, irq=23 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0006000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb0006000-0xb0006fff map[14]: type 4, range 32, base 00002000, size 6, enabled pcib2: device (null) requested decoded I/O range 0x2000-0x203f pcib2: matched entry for 6.8.INTA pcib2: slot 8 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x1068, revid=0x03 bus=6, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b0007000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb0007000-0xb0007fff pcib2: matched entry for 6.11.INTA pcib2: slot 11 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=6, slot=11, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=22 powerspec 2 supports D0 D3 current D0 cbb0: irq 21 at device 5.0 on pci6 pcib2: device cbb0 requested decoded memory range 0xb0000000-0xb00fffff cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xb0008000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac8e104c 0x02100007 0x06070000 0x00824010 0x10: 0xb0008000 0x020000a0 0x40070706 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400115 0x40: 0x818f104d 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28449060 0x06900019 0x001f0000 0x01001b22 0x90: 0x606400c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e220001 0x00c00000 0x00000000 0x00000000 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=104c, dev=802e fwohci0: <1394 Open Host Controller Interface> mem 0xb0000000-0xb0003fff,0xb0004000-0xb00047ff irq 20 at device 5.2 on pci6 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0004000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 08:00:46:03:00:e7:df:a4 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:e7:df:a4 fwe0: bpf attached fwe0: Ethernet address: 0a:00:46:e7:df:a4 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci6: at device 5.3 (no driver attached) fxp0: port 0x2000-0x203f mem 0xb0006000-0xb0006fff irq 20 at device 8.0 on pci6 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0006000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1068 104d 81d0 0003 fxp0: Dynamic Standby mode is enabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:01:4a:82:f9:86 fxp0: [MPSAFE] pci6: at device 11.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1880-0x188f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1880 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] atapci1: port 0x18a0-0x18af,0x1894-0x1897,0x18b0-0x18b7,0x18b8-0x18bb,0x18c0-0x18c7 irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18a0 atapci1: [MPSAFE] ata2: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x18c0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x18b8 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x18b0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1894 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_tz0: on acpi0 unknown: not probed (disabled) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_cmbat0: on acpi0 acpi_acad0: on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xdc000-0xdffff,0xd8000-0xdbfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 fb: new array size 4 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x4601 0x4601 0x4601 0x4601 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x4601 0x4601 0x4601 0x4601 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1995014303 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel ICH6 chip acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Interrupt storm detected on "irq18: atapci1"; throttling interrupt source ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin ad4: ATA-6 disk at ata2-master ad4: 95396MB (195371568 sectors), 193821 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad4 ar: FreeBSD check1 failed [0] f:00 typ:18 s(CHS):0/1/1 e(CHS):911/254/63 s:63 l:14651217 [1] f:00 typ:7 s(CHS):912/0/1 e(CHS):1023/254/63 s:14651280 l:58605120 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:73256400 l:122110065 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 7501423104 end 7501455359 GEOM: Configure ad4s2, start 7501455360 length 30005821440 end 37507276799 GEOM: Configure ad4s3, start 37507276800 length 62520353280 end 100027630079 [0] f:63 typ:114 s(CHS):368/111/45 e(CHS):371/101/51 s:218129509 l:1701990410 [1] f:73 typ:116 s(CHS):67/115/32 e(CHS):299/114/44 s:729050177 l:543974724 [2] f:74 typ:101 s(CHS):114/111/32 e(CHS):353/115/52 s:168653938 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1602027520 l:51635 [0] f:6f typ:80 s(CHS):10/0/13 e(CHS):371/114/37 s:1701736297 l:1920221984 [1] f:6c typ:116 s(CHS):364/43/1 e(CHS):373/43/19 s:1881174640 l:543257185 [2] f:72 typ:105 s(CHS):366/101/41 e(CHS):353/99/41 s:658802 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1618804736 l:49325 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure ad4s3a, start 0 length 268435456 end 268435455 GEOM: Configure ad4s3b, start 268435456 length 2118197248 end 2386632703 GEOM: Configure ad4s3c, start 0 length 62520353280 end 62520353279 GEOM: Configure ad4s3d, start 2386632704 length 268435456 end 2655068159 GEOM: Configure ad4s3e, start 2655068160 length 268435456 end 2923503615 GEOM: Configure ad4s3f, start 2923503616 length 10737418240 end 13660921855 GEOM: Configure ad4s3g, start 13660921856 length 48859431424 end 62520353279 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 Mounting root from ufs:/dev/ad4s3a start_init: trying /sbin/init Linux ELF exec handler installed --7AUc2qLy4jB3hD7Z--