From owner-freebsd-questions Wed Jan 20 22:17:05 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id WAA20055 for freebsd-questions-outgoing; Wed, 20 Jan 1999 22:17:05 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from www2.shoppersnet.com (shoppersnet.com [204.156.152.112]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id WAA20038 for ; Wed, 20 Jan 1999 22:17:03 -0800 (PST) (envelope-from digital@www2.shoppersnet.com) Received: from localhost (digital@localhost) by www2.shoppersnet.com (8.8.8/8.8.8) with SMTP id WAA25719; Wed, 20 Jan 1999 22:16:02 -0800 (PST) (envelope-from digital@www2.shoppersnet.com) Date: Wed, 20 Jan 1999 22:16:02 -0800 (PST) From: Howard Lew To: "Ronald F. Guilmette" cc: sporkl@ix.netcom.com, questions@FreeBSD.ORG Subject: Re: Hardware woes - AMD K6/2-300 (?) In-Reply-To: <31025.916877934@monkeys.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 20 Jan 1999, Ronald F. Guilmette wrote: > > In message , you wrote: > > >I have used 2.2.8 on an AMD k6/2-300 system. > >Signal 11 is segmentation fault, so it would appear that this would be a > >memory problem. Is your motherboard's memory configuration compatible with > >the memory you are using? > > Yes. I have just learned however that there was a known problem with the > earlier (pre-C) steppings of the AMD-K6/2 which causes them to be unreliable > when used with more than 32MB of memory. This has now been confirmed for > me by AMD. > > My system has 64MB in it. > > The processor that _I_ bought (as part of a complete system) apparently is > of the `A' stepping vintage - it has the bug. > > Of course, the dealer I bought it from claims that hs has no AMD K6/2-300s > which are any later than stepping `A' and that his distributor also has none > of any later stepping... Translation? I got screwed. > > I have been burned by AMD again! The place I work has 3 AMD K6-2 systems: AMD K6-2 300 with 128MB PC100 Memory AMD K6-2 333 with 128MB PC100 Memory AMD K6-2 350 with 64MB EDO 72 Pin Memory All are A stepping and only the 350 has the new CXT core. None of them have stability problems. It sounds to me that either you have a bad cpu or your motherboard may have stability problems. All 3 systems are using the TMC TI5VG+ 1024K Cache MB. Depending on the memory you have, switching the SDRAM timing to 3 instead of 2 may be necessary to create a rock solid system. But keep in mind that there are some AMD K6-2 300s that are rated for 66MHz and not the 100MHz bus. The 66MHz bus ones were cheaper... However, one of my friends had an AMD K6-2 350 that worked fine (i.e, rock solid) until he overclocked the bus to 133MHz for kicks just to check out the performance. The system was not stable at 133MHz bus so when he moved it back to the 100MHz bus, the cpu would no longer compile the kernel without dumping core in the process. I guess the CPU was somehow damaged when overclocked. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message