Date: Mon, 15 Apr 2013 11:06:50 GMT From: FreeBSD bugmaster <bugmaster@freebsd.org> To: freebsd-scsi@FreeBSD.org Subject: Current problem reports assigned to freebsd-scsi@FreeBSD.org Message-ID: <201304151106.r3FB6oqd015232@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o kern/165982 scsi [mpt] mpt instability, drive resets, and losses on Fre o kern/165740 scsi [cam] SCSI code must drain callbacks before free o kern/162256 scsi [mpt] QUEUE FULL EVENT and 'mpt_cam_event: 0x0' f kern/161809 scsi [cam] [patch] set kern.cam.boot_delay via build option o kern/153514 scsi [cam] [panic] CAM related panic o docs/151336 scsi Missing documentation of scsi_ and ata_ functions in c s kern/149927 scsi [cam] hard drive not stopped before removing power dur o kern/148083 scsi [aac] Strange device reporting o kern/147704 scsi [mpt] sys/dev/mpt: new chip revision, partially unsupp o kern/144648 scsi [aac] Strange values of speed and bus width in dmesg o kern/142351 scsi [mpt] LSILogic driver performance problems o kern/134488 scsi [mpt] MPT SCSI driver probes max. 8 LUNs per device o kern/132206 scsi [mpt] system panics on boot when mirroring and 2nd dri o kern/130621 scsi [mpt] tranfer rate is inscrutable slow when use lsi213 o kern/129602 scsi [ahd] ahd(4) gets confused and wedges SCSI bus o kern/128452 scsi [sa] [panic] Accessing SCSI tape drive randomly crashe o kern/128245 scsi [scsi] "inquiry data fails comparison at DV1 step" [re o kern/127927 scsi [isp] isp(4) target driver crashes kernel when set up f kern/127717 scsi [ata] [patch] [request] - support write cache toggling o kern/123674 scsi [ahc] ahc driver dumping o sparc/121676 scsi [iscsi] iscontrol do not connect iscsi-target on sparc o kern/120487 scsi [sg] scsi_sg incompatible with scanners o kern/120247 scsi [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s o kern/114597 scsi [sym] System hangs at SCSI bus reset with dual HBAs 24 problems total.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201304151106.r3FB6oqd015232>