Date: Tue, 17 Feb 2015 14:31:59 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-arm@FreeBSD.org Subject: [Bug 197760] SMP support bug on ARMADA XP MV78460 Message-ID: <bug-197760-7@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=197760 Bug ID: 197760 Summary: SMP support bug on ARMADA XP MV78460 Product: Base System Version: 11.0-CURRENT Hardware: arm OS: Any Status: New Severity: Affects Some People Priority: --- Component: arm Assignee: freebsd-arm@FreeBSD.org Reporter: callthethunder@gmail.com Created attachment 153106 --> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=153106&action=edit device tree used Non-boot CPUs not started on ARMADA XP MV78460: We see the following in dmesg: WARNING: Some AP's failed to start Release APs AP's not started sysctl hw.ncpus = 4 (all 4 cores are detected). Board: RD-AXP-GP rev 1.0 SoC: MV78460 B0 running 4 CPUs Custom configuration CPU: Marvell PJ4B (584) v7 (Rev 2) LE CPU 0 CPU @ 1333 [MHz] L2 @ 667 [MHz] TClock @ 250 [MHz] DDR @ 667 [MHz] DDR 64Bit Width, FastPath Memory Access DDR ECC Enabled Dram Scrubbing starting (use XOR chanel 1) CS 0 Dram Scrubbing 0x1000000:0xffffffff CS 1 Dram Scrubbing 0x0:0xffffffff Total physical DRAM size = 8 GB U-Boot variables that might be relevant: CASset=min MALLOC_len=5 MPmode=smp amp_enable=no autoload=no cacheShare=no console=console=ttyS0,115200 device_partition=0:1 disL2Cache=yes disL2Prefetch=yes disaMvPnp=no eeeEnable=no enaAutoRecovery=yes enaClockGating=no enaCpuStream=no enaDCPref=yes enaFPU=yes enaICPref=yes enaLPAE=yes enaWrAllo=no U-Boot version: U-Boot 2011.12 (Dec 11 2013 - 10:25:52) Marvell version: v2011.12 2013_Q2.1 arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease) GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801 Used device tree is in attachment. -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-197760-7>