Date: Fri, 04 Dec 2009 10:08:37 -0600 From: Robert Noland <rnoland@2hip.net> To: Mark Atkinson <atkin901@gmail.com> Cc: freebsd-x11@freebsd.org Subject: Re: kwin composite w/ opengl on r600? Message-ID: <1259942917.2315.223.camel@balrog.2hip.net> In-Reply-To: <hf98o4$o23$1@ger.gmane.org> References: <hf8snq$epi$1@ger.gmane.org> <1259864054.2315.206.camel@balrog.2hip.net> <hf98o4$o23$1@ger.gmane.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 2009-12-03 at 12:57 -0800, Mark Atkinson wrote:
> Robert Noland wrote:
> > On Thu, 2009-12-03 at 09:32 -0800, Mark Atkinson wrote:
> >> Hi,
> >>
> >> I've been trying to get some of the window effects to work under
> >> kwin/kde4.x, however I think I'm being stymied by the dri mesa build
> >> from ports not supporting the r600.
> >>
> >> e.g. it only loads/enables the software rasterizer below.
> >>
> >> Any hints on getting this working? Can I build the git head for
> >> r600/mesa and have it works with the ports?
> >
> > right now, you need to update libdrm and mesa. For libdrm, you can just
> > bump the version in the port to 2.4.15 and it should be fine. For mesa,
> > you need to install from git until 7.6.1 is released. 7.6 has r600
> > support, but there were a few bugs that didn't get addressed prior to
> > release, which make it very annoying to use in compiz/kde4.
> >
> > My normal process is:
> >
> > Clone the mesa/mesa repo.
> >
> > Use the following to autogen/configure.
> > CPPFLAGS="${CPPFLAGS} -I/usr/local/include" LDFLAGS="${LDFLAGS}
> > -L/usr/local/lib" ./autogen.sh --enable-xcb
> >
> > gmake
> >
> > sudo cp lib/lib* /usr/local/lib
> > sudo cp lib/*_dri.so /usr/local/lib/dri
> >
> > That should have things working pretty well. Note that you need
> > xf86-video-ati 6.12.4, which I just updated the other day.
> >
> > robert.
> >
>
> Many thanks, that seems to help. glxgears -info now reports:
>
> OpenGL vendor string: Advanced Micro Devices, Inc.
> OpenGL renderer string: Mesa DRI R600 (RV610 94C1) 20090101 x86/MMX/SSE2 TCL
> OpenGL version string: 1.5 Mesa 7.8-devel
>
> If I follow the kde 4.0 composite instructions, compositing is available
> but is disabled because it is too slow. I only see one suspicious message:
>
> (II) AIGLX: Screen 0 is not DRI2 capable
>
> If I disable checks, I can run with compositing, but it is definitely
> very slow.
Hrm, I don't normally use kde, but I have tested with it at times.
Normally I use compiz+gnome and performance should be more than
acceptable. Even games like nexuiz, openarena, UT and vdrift should be
well into the playable range now.
> If you notice anything conflicting in my xorg.conf please let me know.
> plain text document attachment (xorg.conf)
Actually, I don't see anything odd in this config. The only thing I can
point out is that I use the radeon driver rather than radeonhd, but it
isn't clear to me if that could somehow impact performance in this area.
The only reason that I know of to use radeonhd currently is if you need
HDMI audio, otherwise radeon has everything and more.
What kernel are you running on? Any -CURRENT or -STABLE branch should
have all the needed bits. If you have a kernel that doesn't have
r600_blit.c then it will be really slow since the initial code used a
memcpy before the hardware support was enabled.
robert.
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> FontPath "/usr/local/lib/X11/fonts/OTF"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> EndSection
>
> Section "Module"
> Load "extmod"
> Load "record"
> Load "dbe"
> Load "glx"
> Load "dri"
> Load "dri2"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "AccelMethod" # [<str>]
> #Option "offscreensize" # [<str>]
> #Option "SWcursor" # [<bool>]
> #Option "ignoreconnector" # [<str>]
> #Option "forcereduced" # [<bool>]
> #Option "forcedpi" # <i>
> #Option "useconfiguredmonitor" # [<bool>]
> #Option "HPD" # <str>
> #Option "NoRandr" # [<bool>]
> #Option "RROutputOrder" # [<str>]
> #Option "DRI" # [<bool>]
> #Option "TVMode" # [<str>]
> #Option "ScaleType" # [<str>]
> #Option "UseAtomBIOS" # [<bool>]
> #Option "AtomBIOS" # [<str>]
> #Option "UnverifiedFeatures" # [<bool>]
> #Option "Audio" # [<bool>]
> #Option "HDMI" # [<str>]
> #Option "COHERENT" # [<str>]
> Identifier "Card0"
> Driver "radeonhd"
> Option "AccelMethod" "exa"
> Option "DRI" "on"
> VendorName "ATI Technologies Inc"
> BoardName "RV610 [Radeon HD 2400 XT]"
> BusID "PCI:1:0:0"
> EndSection
>
> Section "Extensions"
> Option "Composite" "Enable"
> EndSection
>
> Section "ServerFlags"
> Option "AIGLX"
> EndSection
>
> Section "DRI"
> Group "video"
> Mode 0660
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1600x1200"
> Virtual 3200 1200
> EndSubSection
> EndSection
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
--
Robert Noland <rnoland@2hip.net>
2Hip Networks
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1259942917.2315.223.camel>