From owner-freebsd-mobile Fri Mar 23 6:35:41 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from bumper.jellybaby.net (bumper.jellybaby.net [194.159.247.1]) by hub.freebsd.org (Postfix) with ESMTP id C7F6537B71B for ; Fri, 23 Mar 2001 06:35:33 -0800 (PST) (envelope-from simond@bumper.jellybaby.net) Received: (from simond@localhost) by bumper.jellybaby.net (8.9.2/8.9.2) id OAA14703 for freebsd-mobile@freebsd.org; Fri, 23 Mar 2001 14:35:32 GMT (envelope-from simond) Date: Fri, 23 Mar 2001 14:35:32 +0000 From: simond@irrelevant.org To: freebsd-mobile@freebsd.org Subject: Problems mounting CF flash card via PCMCIA adaptor Message-ID: <20010323143532.A14604@irrelevant.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Despite successfully using a 16mb flash card in the same adaptor I can't manage to get a new 64mb Jenoptik one working, I've enclosed a copy of the dumpcis output for it /var/log/messages output: Mar 6 14:53:14 laptop pccardd[9039]: Card "3SYSTEM SSSCF064MAA "("") [] [] has function ID 4 Mar 6 14:53:19 laptop pccardd[9039]: driver allocation failed for (null)((null)): Device not configured I hope someone has an idea :) dumpcis output: Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: d9 01 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 250nS, Memory block size = 2Kb, 1 units Tuple #2, code = 0x1c (Other conditions for common memory), length = 4 000: 03 d9 01 ff (MWAIT) (3V card) Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2 000: df 01 Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 00 00 00 00 PCMCIA ID = 0x0, OEM ID = 0x0 Tuple #5, code = 0x15 (Version 1 info), length = 32 000: 04 01 33 53 59 53 54 45 4d 20 53 53 53 43 46 30 010: 36 34 4d 41 41 20 00 00 00 00 00 00 00 00 00 ff Version = 4.1, Manuf = [3SYSTEM SSSCF064MAA ], card vers = [] Addit. info = [],[] Tuple #6, code = 0x21 (Functional ID), length = 2 000: 04 01 Fixed disk card - POST initialize Tuple #7, code = 0x22 (Functional EXT), length = 2 000: 01 01 Disk interface: IDE Tuple #8, code = 0x22 (Functional EXT), length = 3 000: 02 0c 0f Disk features: Silicon, Unique, Single Sleep, Standby, Idle, Low power, Tuple #9, code = 0x1a (Configuration map), length = 5 000: 01 03 00 02 0f Reg len = 2, config register addr = 0x200, last config = 0x3 Registers: XXXX---- Tuple #10, code = 0x1b (Configuration entry), length = 8 000: c0 c0 a1 01 55 08 00 20 Config index = 0x0(default) Interface byte = 0xc0 (memory) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Memory space length = 0x8 Max twin cards = 0 Misc attr: (Power down supported) Tuple #11, code = 0x1b (Configuration entry), length = 6 000: 00 01 21 b5 1e 4d Config index = 0x0 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #12, code = 0x1b (Configuration entry), length = 10 000: c1 41 99 01 55 64 f0 ff ff 20 Config index = 0x1(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse, Shared IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Max twin cards = 0 Misc attr: (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 6 000: 01 01 21 b5 1e 4d Config index = 0x1 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #14, code = 0x1b (Configuration entry), length = 15 000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20 Config index = 0x2(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x1f0 block length = 0x8 I/O address # 2: block start = 0x3f6 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #15, code = 0x1b (Configuration entry), length = 6 000: 02 01 21 b5 1e 4d Config index = 0x2 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #16, code = 0x1b (Configuration entry), length = 15 000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20 Config index = 0x3(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x170 block length = 0x8 I/O address # 2: block start = 0x376 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #17, code = 0x1b (Configuration entry), length = 6 000: 03 01 21 b5 1e 4d Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #18, code = 0x14 (No link), length = 0 Tuple #19, code = 0xff (Terminator), length = 0 -- Simon Dick simond@irrelevant.org "Why do I get this urge to go bowling everytime I see Tux?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message