Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Feb 2019 20:52:36 +0000 (UTC)
From:      Emmanuel Vadot <manu@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r344633 - in head/sys: conf dev/usb/controller
Message-ID:  <201902272052.x1RKqahM020028@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: manu
Date: Wed Feb 27 20:52:35 2019
New Revision: 344633
URL: https://svnweb.freebsd.org/changeset/base/344633

Log:
  usb_nop_xceiv: Add support for this pseudo device
  
  This is a "fake" phy that handle regulator, clocks and reset gpio.
  Only clock and regulator is supported for now.
  
  Sponsored-by:      Rubicon Communications, LCC ("Netgate")

Added:
  head/sys/dev/usb/controller/usb_nop_xceiv.c   (contents, props changed)
Modified:
  head/sys/conf/files.arm64

Modified: head/sys/conf/files.arm64
==============================================================================
--- head/sys/conf/files.arm64	Wed Feb 27 20:24:23 2019	(r344632)
+++ head/sys/conf/files.arm64	Wed Feb 27 20:52:35 2019	(r344633)
@@ -234,6 +234,7 @@ dev/usb/controller/generic_ehci.c optional	ehci acpi
 dev/usb/controller/generic_ohci.c optional	ohci fdt
 dev/usb/controller/generic_usb_if.m optional	ohci fdt
 dev/usb/controller/xhci_mv.c	optional	xhci_mv fdt
+dev/usb/controller/usb_nop_xceiv.c	optional fdt ext_resources
 dev/vnic/mrml_bridge.c		optional	vnic fdt
 dev/vnic/nic_main.c		optional	vnic pci
 dev/vnic/nicvf_main.c		optional	vnic pci pci_iov

Added: head/sys/dev/usb/controller/usb_nop_xceiv.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/dev/usb/controller/usb_nop_xceiv.c	Wed Feb 27 20:52:35 2019	(r344633)
@@ -0,0 +1,211 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2019 Rubicon Communications, LLC (Netgate)
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/rman.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+
+#include <machine/bus.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/extres/clk/clk.h>
+#include <dev/extres/regulator/regulator.h>
+#include <dev/extres/phy/phy_usb.h>
+
+#include "phynode_if.h"
+
+struct usb_nop_xceiv_softc {
+	device_t		dev;
+	regulator_t		vcc_supply;
+	clk_t			clk;
+	uint32_t		clk_freq;
+};
+
+static struct ofw_compat_data compat_data[] = {
+	{"usb-nop-xceiv", 1},
+	{NULL,            0}
+};
+
+/* Phy class and methods. */
+static int usb_nop_xceiv_phy_enable(struct phynode *phy, bool enable);
+static phynode_usb_method_t usb_nop_xceiv_phynode_methods[] = {
+	PHYNODEMETHOD(phynode_enable, usb_nop_xceiv_phy_enable),
+
+	PHYNODEMETHOD_END
+};
+DEFINE_CLASS_1(usb_nop_xceiv_phynode, usb_nop_xceiv_phynode_class,
+    usb_nop_xceiv_phynode_methods,
+    sizeof(struct phynode_usb_sc), phynode_usb_class);
+
+static int
+usb_nop_xceiv_phy_enable(struct phynode *phynode, bool enable)
+{
+	struct usb_nop_xceiv_softc *sc;
+	device_t dev;
+	intptr_t phy;
+	int error;
+
+	dev = phynode_get_device(phynode);
+	phy = phynode_get_id(phynode);
+	sc = device_get_softc(dev);
+
+	if (phy != 0)
+		return (ERANGE);
+
+	/* Enable the phy clock */
+	if (sc->clk_freq != 0) {
+		if (enable) {
+			error = clk_set_freq(sc->clk, sc->clk_freq,
+			  CLK_SET_ROUND_ANY);
+			if (error != 0) {
+				device_printf(dev, "Cannot set clock to %dMhz\n",
+				  sc->clk_freq);
+				goto fail;
+			}
+
+			error = clk_enable(sc->clk);
+		} else
+			error = clk_disable(sc->clk);
+
+		if (error != 0) {
+			device_printf(dev, "Cannot %sable the clock\n",
+			    enable ? "En" : "Dis");
+			goto fail;
+		}
+	}
+	if (sc->vcc_supply) {
+		if (enable)
+			error = regulator_enable(sc->vcc_supply);
+		else
+			error = regulator_disable(sc->vcc_supply);
+		if (error != 0) {
+			device_printf(dev, "Cannot %sable the regulator\n",
+			    enable ? "En" : "Dis");
+			goto fail;
+		}
+	}
+
+	return (0);
+
+fail:
+	return (ENXIO);
+}
+
+static int
+usb_nop_xceiv_probe(device_t dev)
+{
+
+	if (!ofw_bus_status_okay(dev))
+		return (ENXIO);
+
+	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
+		return (ENXIO);
+
+	device_set_desc(dev, "USB NOP PHY");
+	return (BUS_PROBE_DEFAULT);
+}
+
+static int
+usb_nop_xceiv_attach(device_t dev)
+{
+	struct usb_nop_xceiv_softc *sc;
+	struct phynode *phynode;
+	struct phynode_init_def phy_init;
+	phandle_t node;
+	int error;
+
+	sc = device_get_softc(dev);
+	sc->dev = dev;
+	node = ofw_bus_get_node(dev);
+
+	/* Parse the optional properties */
+	OF_getencprop(node, "clock-frequency", &sc->clk_freq, sizeof(uint32_t));
+
+	error = clk_get_by_ofw_name(dev, node, "main_clk", &sc->clk);
+	if (error != 0 && sc->clk_freq != 0) {
+		device_printf(dev, "clock property is mandatory if clock-frequency is present\n");
+		return (ENXIO);
+	}
+
+	regulator_get_by_ofw_property(dev, node, "vcc-supply", &sc->vcc_supply);
+
+	phy_init.id = 0;
+	phy_init.ofw_node = node;
+	phynode = phynode_create(dev, &usb_nop_xceiv_phynode_class,
+	    &phy_init);
+	if (phynode == NULL) {
+		device_printf(dev, "failed to create USB NOP PHY\n");
+		return (ENXIO);
+	}
+	if (phynode_register(phynode) == NULL) {
+		device_printf(dev, "failed to create USB NOP PHY\n");
+		return (ENXIO);
+	}
+
+	OF_device_register_xref(OF_xref_from_node(node), dev);
+
+	return (0);
+}
+
+static int
+usb_nop_xceiv_detach(device_t dev)
+{
+
+	return (EBUSY);
+}
+
+static device_method_t usb_nop_xceiv_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe, usb_nop_xceiv_probe),
+	DEVMETHOD(device_attach, usb_nop_xceiv_attach),
+	DEVMETHOD(device_detach, usb_nop_xceiv_detach),
+
+	DEVMETHOD_END
+};
+
+static devclass_t usb_nop_xceiv_devclass;
+
+static driver_t usb_nop_xceiv_driver = {
+	"usb_nop_xceiv",
+	usb_nop_xceiv_methods,
+	sizeof(struct usb_nop_xceiv_softc),
+};
+
+EARLY_DRIVER_MODULE(usb_nop_xceiv, simplebus, usb_nop_xceiv_driver,
+    usb_nop_xceiv_devclass, 0, 0, BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE);



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201902272052.x1RKqahM020028>