From owner-freebsd-questions Thu Oct 1 11:01:30 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA01435 for freebsd-questions-outgoing; Thu, 1 Oct 1998 11:01:30 -0700 (PDT) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from risc.ucp.br (risc.ucp.br [200.20.252.61]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA01416 for ; Thu, 1 Oct 1998 11:01:24 -0700 (PDT) (envelope-from pcerq@risc.ucp.br) Received: from pc_156_35 (pc1535.ucp.br [200.156.15.35]) by risc.ucp.br (8.8.8/8.8.8) with SMTP id OAA21014 for ; Thu, 1 Oct 1998 14:57:45 -0300 (EST) (envelope-from pcerq@risc.ucp.br) From: "Paulo M. Cerqueira" To: Subject: IBM PC Server 330 & FreeBSD 2.2.7 Date: Thu, 1 Oct 1998 15:00:11 -0300 Message-ID: <000201bded65$554336b0$230f9cc8@pc_156_35.ucp.br> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, This is the problem : IBM PC Server 330, PPRO 200 with onboard SCSI controller. SCSI : AIC-7880 Ultra Wide W Bios v 1.25), SCSI chip 7880p. We start with visual, remove all the conflicting devices, save the configuration and ... ... chip0: rev 0x02 on pci0.0.0 vga0: rev 0x01 on pci0.7.0 chip1: rev 0x01 on pci0.16.0 chip2: rev 0x15 on pci0.19.0 Probing for devices on PCI bus 1: ahc0: rev 0x00 int a irq 15 on pci1.4.0 ahc0: Illegal cable configuration!!. Only two connectors on the adapter may be used at a time! ahc0: aic 7880 Wide Channel A, SCSI Id=7, 16/255 SCBs lnc1: rev 0x16 int a irq 11 on pci1.5.0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sco: VGA color <4 virtual consoles, flags-0x0> lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface changing root device to fd0s4c rootfs is 1440 Kbyte compiled in MFS [the system stops here] P.S.: We have tested the procedure with 2 IBM Servers. No problem with 2.2.6, Linux RH5 and NT4.0 (despite the message "Illegal cable configuration"), same problem with 3.0 (CAM and no-CAM). Any ideas ? Anyone with the same hardware (IBM PC Server 330) ? TIA, //// Paulo Monteiro Cerqueira ///////////////////////////////// Coordenador de Desenvolvimento-CPD (024)237-5062 r313/249 R Benjamin Constant, 213 (024)242-7747(fax) 25610-130 Petropolis RJ (Brasil) //////////////// Universidade Catolica de Petropolis ////////// To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message