Date: Sat, 11 Sep 2004 10:47:16 -0400 (EDT) From: Elliot Dierksen <elliot@mx.oau.org> To: FreeBSD-gnats-submit@FreeBSD.org Subject: ports/71593: Problem with interaction of mimedefang and p5-MIME-Tools Message-ID: <200409111447.i8BElG2J091324@mx.oau.org> Resent-Message-ID: <200409111450.i8BEoOld097389@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 71593
>Category: ports
>Synopsis: Problem with interaction of mimedefang and p5-MIME-Tools
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-ports-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Sep 11 14:50:24 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Elliot Dierksen
>Release: FreeBSD 5.2.1-RELEASE-p9 i386
>Organization:
>Environment:
System: FreeBSD mx.oau.org 5.2.1-RELEASE-p9 FreeBSD 5.2.1-RELEASE-p9 #18: Sat Jul 31 07:34:25 EDT 2004 root@mx.oau.org:/usr/obj/usr/src/sys/MXV3 i386
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #18: Sat Jul 31 07:34:25 EDT 2004
root@mx.oau.org:/usr/obj/usr/src/sys/MXV3
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08fd000.
MPTable: <HP XU/XW >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (448.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
avail memory = 251162624 (239 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdf20
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 7 INTD routed to irq 19
pcib0: slot 8 INTA routed to irq 16
pcib0: slot 20 INTA routed to irq 17
agp0: <Intel 82443GX host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 19 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0x2180-0x218f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
pci0: <mass storage, SCSI> at device 8.0 (no driver attached)
pci0: <display, VGA> at device 16.0 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 19.0 on pci0
pci2: <PCI bus> on pcib2
pcib2: slot 4 INTA routed to irq 19
pcib2: slot 5 INTA routed to irq 16
pci2: <mass storage, SCSI> at device 4.0 (no driver attached)
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xece0-0xecff mem 0xfbfff400-0xfbfff41f irq 16 at device 5.0 on pci2
pcn0: Ethernet address: 00:10:83:35:31:a7
miibus0: <MII bus> on pcn0
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
asr0: <Adaptec Caching SCSI RAID> mem 0xf2000000-0xf3ffffff irq 17 at device 20.0 on pci0
asr0: major=154
asr0: ADAPTEC 2110S FW Rev. 380E, 1 channel, 256 CCBs, Protocol I2O
pcib3: <PCI-PCI bridge> at device 20.1 on pci0
pci3: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem 0xc8000-0xcdfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
acd0: DVDROM <MATSHITADVD-ROM SR-8583> at ata0-master PIO4
GEOM: create disk da0 dp=0xc2df6050
SMP: AP CPU #1 Launched!
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-1 380E> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 8715MB (17848320 512 byte sectors: 255H 63S/T 1111C)
>Description:
mimedefang-2.44 and p5-MIME-Tools-5.411a_3,1 work properly together. Starting
with p5-MIME-Tools-5.411a_4,1 and including p5-MIME-Tools-5.411a_5,1, this
is not the case. mimedefang is unable to start. See the following error
messages:
Sep 11 10:31:52 mx mimedefang[20567]: MIMEDefang-2.44: mi_stop=1
Sep 11 10:34:03 mx mimedefang-multiplexor[86869]: started; minSlaves=2, maxSlaves=10, maxRequests=500, maxIdleTime=300, busyTimeout=600, clientTimeout=10
Sep 11 10:34:03 mx mimedefang-multiplexor[86869]: Starting slave 0 (pid 86870) (1 running): Bringing slaves up to minSlaves (2)
Sep 11 10:34:03 mx mimedefang[86881]: Multiplexor alive - entering main loop
Sep 11 10:34:04 mx mimedefang-multiplexor[86869]: Slave 0 stderr: Can't locate object method "SWASHNEW" via package "utf8" (perhaps you forgot to load "utf8"?) at /usr/local/lib/perl5/site_perl/5.6.1/MIME/Parser/Filer.pm line 362. Compilation failed in require at /usr/local/lib/perl5/site_perl/5.6.1/MIME/Parser.pm line 152. BEGIN failed--compilation aborted at /usr/local/lib/perl5/site_perl/5.6.1/MIME/Parser.pm line 152. Compilation failed in require at /usr/local/bin/mimedefang.pl line 154. BEGIN failed--compilation aborted at /usr/local/bin/mimedefang.pl line 154.
Sep 11 10:34:04 mx mimedefang-multiplexor[86869]: Reap: Idle slave 0 (pid 86870) exited normally with status 255 (SLAVE DIED UNEXPECTEDLY)
Sep 11 10:34:04 mx mimedefang-multiplexor[86869]: Slave 0 resource usage: req=0, scans=0, user=0.704, sys=0.089, nswap=0, majflt=0, minflt=1161, maxrss=5960, bi=1, bo=0
Sep 11 10:34:06 mx mimedefang-multiplexor[86869]: Starting slave 0 (pid 86904) (1 running): Bringing slaves up to minSlaves (2)
Sep 11 10:34:06 mx mimedefang-multiplexor[86869]: Slave 0 stderr: Can't locate object method "SWASHNEW" via package "utf8" (perhaps you forgot to load "utf8"?) at /usr/local/lib/perl5/site_perl/5.6.1/MIME/Parser/Filer.pm line 362. Compilation failed in require at /usr/local/lib/perl5/site_perl/5.6.1/MIME/Parser.pm line 152. BEGIN failed--compilation aborted at /usr/local/lib/perl5/site_perl/5.6.1/MIME/Parser.pm line 152. Compilation failed in require at /usr/local/bin/mimedefang.pl line 154. BEGIN failed--compilation aborted at /usr/local/bin/mimedefang.pl line 154.
Sep 11 10:34:06 mx mimedefang-multiplexor[86869]: Reap: Idle slave 0 (pid 86904) exited normally with status 255 (SLAVE DIED UNEXPECTEDLY)
Sep 11 10:34:06 mx mimedefang-multiplexor[86869]: Slave 0 resource usage: req=0, scans=0, user=0.644, sys=0.133, nswap=0, majflt=0, minflt=1160, maxrss=5960, bi=0, bo=0
>How-To-Repeat:
Install one of the impacted versions of p5-MIME-Tools.
>Fix:
Unknown. I have been reverting to the p5-MIME-Tools-5.411a_3,1 version of
the port and it seems to be working properly.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409111447.i8BElG2J091324>