Date: Sat, 17 Aug 2002 20:16:26 +0100 From: Pete French <pete@twisted.org.uk> To: nate@root.org Cc: freebsd-bugs@FreeBSD.org, freebsd-gnats-submit@freebsd.org Subject: Re: kern/27834: Cannot warm-reboot Compaq AP400 due to SCSI problems Message-ID: <E17g93i-000PUi-00@toybox.twisted.org.uk> In-Reply-To: <Pine.BSF.4.21.0208161639490.43982-100000@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Please boot -v and reply to all with the dmesg output. Some sym0 SMP
> troubles have been the result of irq sharing.
If you are referring to kern/37043 the that was also submitted by me
from my work account. I assume you are the same person as njl@FreeBSD.org
who mailed me about that one on friday as well as the mail about this one ?
I dont have a lot of luck with Compaq onboard SCSI adapters it seems. :-)
The dmesg output from a boot -v is below. I didnt think these two problems
were related as this problem had been occurring on this machine ever since
4.2, whereas the IRQ sharing bug didnt occur until after 4.5... plus the
fact that the machine actually runs fine, its only the warm reboot which
has problems. Its true that all the important devices in this
machine (including sym0) are sharing IRQ 11 though.
cheers,
-pete french.
-----
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #0: Thu Jul 18 23:18:08 BST 2002
pete@skerry:/usr/obj/usr/src/sys/SKERRY
Calibrating clock(s) ... TSC clock: 399069209 Hz, i8254 clock: 1193204 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (399.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00411000 - 0x07ff7fff, 129921024 bytes (31719 pages)
avail memory = 126631936 (123664K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xe0000 (c00e0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1227
pnpbios: Found PnP BIOS data at 0xc00f7e80
pnpbios: Entry = f0000:57f3 Rev = 1.0
pnpbios: OEM ID 15ae110e
Other BIOS signatures found:
ACPI: 000ec010
Preloaded elf kernel "kernel" at 0xc03ea000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 8 entries at 0xc00e1690
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 54000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1000, dev=0x000f, revid=0x04
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00006000, size 8
map[14]: type 1, range 32, base 50500000, size 8
map[18]: type 1, range 32, base 50400000, size 12
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 50600000, size 12
map[14]: type 1, range 32, base 00006400, size 5
map[18]: type 1, range 32, base 50100000, size 20
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 50700000, size 12
map[14]: type 1, range 32, base 00006420, size 5
map[18]: type 1, range 32, base 50200000, size 20
found-> vendor=0x1014, dev=0x0022, revid=0x07
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x102b, dev=0x051b, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 51000000, size 24
map[14]: type 1, range 32, base 50300000, size 14
map[18]: type 1, range 32, base 50800000, size 23
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00006460, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 00006440, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 0000fc00, size 4
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
sym0: <875> port 0x6000-0x60ff mem 0x50400000-0x50400fff,0x50500000-0x505000ff irq 11 at device 11.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6400-0x641f mem 0x50100000-0x501fffff,0x50600000-0x50600fff irq 11 at device 12.0 on pci0
fxp0: using memory space register mapping
using shared irq11.
fxp0: Ethernet address 00:08:c7:8f:13:76
fxp0: PCI IDs: 8086 1229 0e11 b0c6 0005
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x6420-0x643f mem 0x50200000-0x502fffff,0x50700000-0x50700fff irq 11 at device 13.0 on pci0
fxp1: using memory space register mapping
fxp1: Ethernet address 00:50:8b:02:ef:c6
fxp1: PCI IDs: 8086 1229 0e11 b01e 0005
fxp1: Dynamic Standby mode is disabled
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp1 attached
pcib2: <IBM 82351 PCI-PCI bridge> at device 14.0 on pci0
found-> vendor=0x0e11, dev=0xae10, revid=0x03
class=01-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00005000, size 8
map[14]: type 1, range 32, base 50000000, size 8
pci2: <PCI bus> on pcib2
ida0: <Compaq Smart Array 3200 controller> port 0x5000-0x50ff mem 0x50000000-0x500000ff irq 11 at device 0.0 on pci2
ida0: drives=2 firm_rev=4.50
idad0: <Compaq Logical Drive> on ida0
idad0: 8187MB (16768800 sectors), blocksize=512
Creating DISK idad0
idad1: <Compaq Logical Drive> on ida0
idad1: 140955MB (288676320 sectors), blocksize=512
Creating DISK idad1
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> (vendor=0x102b, dev=0x051b) at 16.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x6460-0x646f at device 20.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x6460
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 50 50
ata0-slave: ATAPI 50 50
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA 50 50
ata0-slave: ATA 50 50
ata0: devices=00
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x6468
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6440-0x645f irq 11 at device 20.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xfc00-0xfc0f at device 20.3 on pci0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
ESS0006: adding io range 0x800-0xfff, size=0x8, align=0x8
ESS1869: start dependant
ESS1869: adding dma mask 0x2
ESS1869: adding dma mask 0x9
ESS1869: adding irq mask 0x20
ESS1869: adding io range 0x220-0x22f, size=0x10, align=0
ESS1869: adding io range 0x388-0x38b, size=0x4, align=0
ESS1869: adding io range 0x330-0x331, size=0x2, align=0
ESS1869: start dependant
ESS1869: adding dma mask 0x2
ESS1869: adding dma mask 0x9
ESS1869: adding irq mask 0x6a0
ESS1869: adding io range 0x220-0x24f, size=0x10, align=0x20
ESS1869: adding io range 0x388-0x38b, size=0x4, align=0
ESS1869: adding io range 0x300-0x331, size=0x2, align=0x30
ESS1869: start dependant
ESS1869: adding dma mask 0xb
ESS1869: adding dma mask 0xb
ESS1869: adding irq mask 0x1ea0
ESS1869: adding io range 0x220-0x28f, size=0x10, align=0x20
ESS1869: adding io range 0x388-0x38b, size=0x4, align=0
ESS1869: adding io range 0x300-0x331, size=0x2, align=0x30
ESS1869: start dependant
ESS1869: adding dma mask 0xb
ESS1869: adding dma mask 0xb
ESS1869: adding irq mask 0x1ea0
ESS1869: adding io range 0x220-0x28f, size=0x10, align=0x20
ESS1869: adding io range 0x388-0x38b, size=0x4, align=0
ESS1869: adding io range 0x800-0xfff, size=0x2, align=0x2
ESS1869: start dependant
ESS1869: adding dma mask 0xb
ESS1869: adding dma mask 0xb
ESS1869: adding irq mask 0x1ea0
ESS1869: adding io range 0x220-0x28f, size=0x10, align=0x20
ESS1869: adding io range 0x800-0xfff, size=0x4, align=0x4
ESS1869: adding io range 0x800-0xfff, size=0x2, align=0x2
ESS1869: end dependant
ESS0001: start dependant
ESS0001: adding io range 0x201-0x201, size=0x1, align=0
ESS0001: start dependant
ESS0001: adding io range 0x200-0x20f, size=0x1, align=0x1
ESS0001: end dependant
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
sbc0: <ESS ES1869> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc0
pcm0: ESS1869 detected, newspeed
pcm0: sndbuf_setmap 4000, 1000; 0xc85b2000 -> 4000
pcm0: sndbuf_setmap 5000, 1000; 0xc85b3000 -> 5000
unknown: <ESS ES1869 Plug and Play AudioDrive> failed to probe at port 0x201 on isa0
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
1:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c840, tty 6310ba, net 6718ba
bpf: sl0 attached
bpf: faith0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging disabled
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting WDMA2 on Intel chip
acd0: <COMPAQ CR-589/GC4K> CDROM drive at ata1 as master
acd0: read 5515KB/s (4021KB/s), 512KB buffer, WDMA2
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
Mounting root from ufs:/dev/idad0s3a
idad0s1: type 0x12, start 32, end = 73439, size 73408 : OK
idad0s2: type 0x7, start 73440, end = 2170559, size 2097120 : OK
idad0s3: type 0xa5, start 2170560, end = 16768799, size 14598240 : OK
start_init: trying /sbin/init
idad1s1: type 0xb, start 32, end = 2039999, size 2039968 : OK
idad1s2: type 0xa5, start 2040000, end = 288676319, size 286636320 : OK
idad1s1: type 0xb, start 32, end = 2039999, size 2039968 : OK
idad1s2: type 0xa5, start 2040000, end = 288676319, size 286636320 : OK
idad1s1: type 0xb, start 32, end = 2039999, size 2039968 : OK
idad1s2: type 0xa5, start 2040000, end = 288676319, size 286636320 : OK
idad1s1: type 0xb, start 32, end = 2039999, size 2039968 : OK
idad1s2: type 0xa5, start 2040000, end = 288676319, size 286636320 : OK
idad1s1: type 0xb, start 32, end = 2039999, size 2039968 : OK
idad1s2: type 0xa5, start 2040000, end = 288676319, size 286636320 : OK
Linux ELF exec handler installed
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E17g93i-000PUi-00>