From owner-freebsd-smp Wed Jun 21 9: 3:44 2000 Delivered-To: freebsd-smp@freebsd.org Received: from apollo.backplane.com (apollo.backplane.com [216.240.41.2]) by hub.freebsd.org (Postfix) with ESMTP id AED6E37BEA8 for ; Wed, 21 Jun 2000 09:03:35 -0700 (PDT) (envelope-from dillon@apollo.backplane.com) Received: (from dillon@localhost) by apollo.backplane.com (8.9.3/8.9.1) id JAA95167; Wed, 21 Jun 2000 09:03:28 -0700 (PDT) (envelope-from dillon) Date: Wed, 21 Jun 2000 09:03:28 -0700 (PDT) From: Matthew Dillon Message-Id: <200006211603.JAA95167@apollo.backplane.com> To: Martin Cracauer Cc: Warner Losh , Poul-Henning Kamp , mjacob@feral.com, freebsd-smp@FreeBSD.ORG Subject: Re: SMP discussion moving to freebsd-smp References: <55142.961529404@critter.freebsd.dk> <200006201936.NAA71564@harmony.village.org> <200006201954.MAA88510@apollo.backplane.com> <20000621173732.A56214@cons.org> Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org :.. :> happen is that a base system with only core features enabled (disk, :> serial, console, network) will always be more stable during the mergework :> then a system with the kitchen sink in. A system with the kitchen :> sink in may not even compile! : :Please give us a list of devices in your development machine. I'm :certainly willing to build a similar machine to walk in your :footsteps. Probably not useful, but I've appended my TEST3 kernel config file. :Another suggestion: It would be very useful is to keep stability on :the kernel->userland API for the transition period. That means, if :-current becomes unstable from Jul, 1th until the end of August, I'd :like to be able to live with an userland from Jun, 30th for all the :then-current kernels. : :Modulo ps/top, which I can rebuild on demand, but - if possible - no :problems with essential system-near tools like mount and fsck. : :Martin I don't forsee any major changes to the userland. There will probably be a lot of recompiling of libkvm and related programs, though. -Matt machine i386 #cpu I386_CPU #cpu I486_CPU cpu I586_CPU cpu I686_CPU ident TEST3 maxusers 128 hints "GENERIC.hints" #Default places to look for devices. options IDE_DELAY=5000 options SCSI_DELAY=5000 options MAXMEM="(256*1024)" options DDB options INVARIANTS options INVARIANT_SUPPORT options SOFTUPDATES #options SHMALL=65537 #options SHMMAXPGS=65537 # -Os broken # makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols makeoptions COPTFLAGS="-O -pipe" #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores #options P1003_1B #Posix P1003_1B real-time extensions #options _KPOSIX_PRIORITY_SCHEDULING #options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed # XXX #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=8 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa #device eisa device pci #options COMPAT_OLDISA # compatability shims for lnc, fe, le #options COMPAT_OLDPCI # compatability shims for lnc, vx # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #device adv #device adw #device bt #device aha 1 #device aic # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc 1 device atkbd device psm device vga # splash screen/screen saver device splash # syscons is the default console driver, resembling an SCO console device sc 1 # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx ## Power management support (see LINT for more options) #device apm # ## PCCARD (PCMCIA) support #device card #device pcic # Serial (COM) ports device sio ## Parallel port #device ppc #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device ##device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') ## ISA Ethernet NICs. #device ed #device ex #device ep #device cs #device sn ## WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really ## exists only as a PCMCIA device, so there is no ISA attatement needed ## and resources will always be dynamically assigned by the pccard code. #device wi ## Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will ## work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP ## mode (the factory default). If you set the switches on your ISA ## card for a manually chosen I/O address and IRQ, you must specify ## those paremeters here. #device an ## BayStack 660 and others #device awi ## Xircom pccard ethernet #device xe ## The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie #device fe #device le #device lnc # Pseudo devices - the number indicates how many units to allocated. device loop # Network loopback device ether # Ethernet support device sl 4 # Kernel SLIP device ppp 4 # Kernel PPP device tun 4 # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device ccd 4 device md # Memory "disks" device gif 4 # IPv6 and IPv4 tunneling device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf 4 # Berkeley packet filter ## USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) ##device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device urio # Diamond Rio 500 MP3 player ## USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message