Date: Tue, 9 Apr 2002 21:45:18 -0700 From: "naptime" <naptime@cervnet.com> To: <freebsd-questions@freebsd.org> Subject: hello Message-ID: <000001c1e04a$84404210$0200a8c0@lightning>
next in thread | raw e-mail | index | archive | help
One of my friends told me to email you guys here, that you guys have a
fast response time and everything. Im currently having this problem on
this machine, here is uname -a output then dmesg output.
[root@tornado src]#uname -a;dmesg
FreeBSD tornado 4.5-RELEASE-p2 FreeBSD 4.5-RELEASE-p2 #0: Wed Apr 10
04:28:13 PDT 2002 root@tornado:/usr/src/sys/compile/jeev i386
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-RELEASE-p2 #0: Wed Apr 10 04:28:13 PDT 2002
root@tornado:/usr/src/sys/compile/jeev
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (999.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 2147418112 (2097088K bytes)
avail memory = 2086449152 (2037548K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04a7000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdc80
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 18 -> irq 10
IOAPIC #0 intpin 16 -> irq 11
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 2 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 2 at device
7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pcib2: <PCI to PCI bridge (vendor=1044 device=a500)> at device 8.0 on
pci0
pci2: <PCI bus> on pcib2
asr0: <Adaptec Caching SCSI RAID> mem 0xd6000000-0xd7ffffff irq 5 at
device 8.1 on pci0
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 320H, 1 channel, 256 CCBs, Protocol I2O
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem
0xdc000000-0xdc00007f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:8d:55:de
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x125d, dev=0x1969) at 11.0 irq 11
orm0: <Option ROMs> at iomem
0xc0000-0xc87ff,0xcc000-0xd1fff,0xd2000-0xd27ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
acd0: DVD-ROM <DVD-ROM DDU1621> at ata1-master using PIO4
Mounting root from ufs:/dev/da0s1a
da0 at asr0 bus 0 target 2 lun 0
da0: <ADAPTEC RAID-5 320H> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 105717MB (216508416 512 byte sectors: 255H 63S/T 13477C)
pid 21243 (cc1), uid 0: exited on signal 10 (core dumped)
===> cccp
cc -O -pipe -DIN_GCC -DHAVE_CONFIG_H
-DPREFIX=\"/usr/obj/usr/src/i386/usr\"
-I/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/config -c
/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/cccp.c
cc -O -pipe -DIN_GCC -DHAVE_CONFIG_H
-DPREFIX=\"/usr/obj/usr/src/i386/usr\"
-I/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/config -c
/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/obstack.c
cc -O -pipe -DIN_GCC -DHAVE_CONFIG_H
-DPREFIX=\"/usr/obj/usr/src/i386/usr\"
-I/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/config -c
/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/prefix.c
cc -O -pipe -DIN_GCC -DHAVE_CONFIG_H
-DPREFIX=\"/usr/obj/usr/src/i386/usr\"
-I/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/config -c
/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/version.c
cc -O -pipe -DIN_GCC -DHAVE_CONFIG_H
-DPREFIX=\"/usr/obj/usr/src/i386/usr\"
-I/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../cc_tools
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc
-I/usr/src/gnu/usr.bin/cc/cccp/../../../../contrib/gcc/config -c
cexp.c
{standard input}: cc: Internal compiler error: program cc1 got fatal
signal 10
Assembler messages:
{standard input}:13024: Warning: end of file not at end of a line;
newline inserted
{standard input}:14898: Error: no such instruction: `p'
*** Error code 1
1 error
I had just reformatted and reinstalled, it was causing other core dumps
like:
==> cc1plus
yacc -d -o parse.c
/usr/src/gnu/usr.bin/cc/cc1plus/../../../../contrib/gcc/cp/parse.y
yacc: 30 shift/reduce conflicts
yacc: 42 reduce/reduce conflicts
*** Signal 11
yaac -d -o parse.c and that usr thing is 1 line sorry for outlook.
This is RELENG_4_5 tag, this is real important that this production
machine works good. Thanks!
j
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c1e04a$84404210$0200a8c0>