Date: Sun, 22 Jun 1997 22:03:31 -0400 From: "Amir Y. Rosenblatt" <amir@i33.com> To: questions@freebsd.org Subject: dump problem [2.2.1] Message-ID: <19970622220331.25686@i33.com>
next in thread | raw e-mail | index | archive | help
Background: I was running 2.2.1-STABLE and had a disk crash on my boot disk. Put in a new disk, did a fresh install on that disk to cinfigure it, then restored the contents of the original to it. However, now when Iattempt a file system dump I get the following error: DUMP: Date of this level 0 dump: Sun Jun 22 05:00:00 1997 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rwd0a (/) to /dev/nrst0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 33365 tape blocks on 0.01 tape(s). DUMP: dumping (Pass III) [directories] DUMP: write error 64 blocks into volume 1 DUMP: fopen on /dev/tty fails: Device not configured DUMP: The ENTIRE dump is aborted. Additionally, at the same time, /var/log/messages gets hit with the following (the tape drive is SCSI, hooked to an Adaptec 2940UW): Jun 21 05:02:05 prozac /kernel: sd0(ahc0:1:0): UNIT ATTENTION asc:29,0 Jun 21 05:02:05 prozac /kernel: sd0(ahc0:1:0): Power on, reset, or bus device reset occurred field replaceable unit: 1 Jun 21 05:02:05 prozac /kernel: , retries:4 Jun 21 05:02:27 prozac /kernel: sd0(ahc0:1:0): SCB 0x2 - timed out in dataout phase, SCSISIGI == 0x4 Jun 21 05:02:27 prozac /kernel: SEQADDR = 0x124 SCSISEQ = 0x12 SSTAT0 = 0x0 SSTAT1 = 0x2 Jun 21 05:02:27 prozac /kernel: st0(ahc0:3:0): abort message in message buffer Jun 21 05:02:27 prozac /kernel: st0(ahc0:3:0): SCB 1 - Abort Completed. Jun 21 05:02:27 prozac /kernel: st0(ahc0:3:0): no longer in timeout Jun 21 05:04:07 prozac /kernel: st0(ahc0:3:0): SCB 0x1 - timed out while idle, LASTPHASE == 0x1, SCSISIGI == 0x0 Jun 21 05:04:07 prozac /kernel: SEQADDR = 0x4 SCSISEQ = 0x12 SSTAT0 = 0x5 SSTAT1 = 0xa Jun 21 05:04:07 prozac /kernel: st0(ahc0:3:0): SCB 1: Immediate reset. Flags = 0x1 Jun 21 05:04:07 prozac /kernel: ahc0: Issued Channel A Bus Reset. 1 SCBs aborted Jun 21 05:04:07 prozac /kernel: Clearing bus reset Jun 21 05:04:07 prozac /kernel: Clearing 'in-reset' flag Jun 21 05:04:07 prozac /kernel: st0(ahc0:3:0): no longer in timeout etc... The system config is as follows: - Tyan dual PPro motherboard with a single PPro 200 - Adaptec 2940UW - Boot disk: 4 gig Maxtor IDE - A pair of Seagate ST32550W 2.1 gig Baraccudas as the second and third disks. - 96 meg RAM - Number 9 Imagine 128 4 meg video card/ - 3Com 3c509B-TP ethernet card I was intending to move to 2.2.2 but I don't feel comfortable doing a make world without backing the system up. Thanks in abundance, -Amir
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19970622220331.25686>