Date: Tue, 8 Jul 2008 09:24:07 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: alan bryan <alan.bryan@yahoo.com> Cc: freebsd-stable@freebsd.org, d@delphij.net Subject: Re: em0 no longer working after upgrading from 7.0 Release to Stable Message-ID: <20080708002406.GA12415@cdnetworks.co.kr> In-Reply-To: <758546.91889.qm@web50511.mail.re2.yahoo.com> References: <48728913.7050105@delphij.net> <758546.91889.qm@web50511.mail.re2.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jul 07, 2008 at 03:47:28PM -0700, alan bryan wrote: > Should igb be in the GENERIC config file? > > > pwd > /usr/src/sys/amd64/conf > > cat GENERIC | grep igb > > > > I did a "kldload if_igb" and that seemed to work and I now have a igb0 device. > > I get an error though on the other (unused igb1) network port: > > igb0: <Intel(R) PRO/1000 Network Connection version - 1.1.9> port 0x3000-0x301f mem 0xda020000-0xda03ffff,0xda000000-0xda01ffff,0xda080000-0xda083fff irq 56 at device 0.0 on pci8 > igb0: Using MSIX interrupts with 3 vectors > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: [ITHREAD] > igb0: Ethernet address: 00:30:48:c3:27:82 > igb1: <Intel(R) PRO/1000 Network Connection version - 1.1.9> port 0x3020-0x303f mem 0xda060000-0xda07ffff,0xda040000-0xda05ffff,0xda084000-0xda087fff irq 70 at device 0.1 on pci8 > igb1: Using MSIX interrupts with 3 vectors > igb1: igb_allocate_receive_buffers: bus_dmamap_create failed: 12 > igb1: Critical Failure setting up receive buffers > device_attach: igb1 attach returned 12 Either add 'device igb' to your kernel or add the following line to /boot/loader.conf. if_igb_load="YES" > igb0: link state changed to UP > > Thanks, > Alan > -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080708002406.GA12415>