From owner-freebsd-bugs Tue Aug 1 2:47:59 2000 Delivered-To: freebsd-bugs@freebsd.org Received: from nau.antar.bryansk.ru (ns2.bryansk.ru [195.239.214.80]) by hub.freebsd.org (Postfix) with ESMTP id D63FE37BE09; Tue, 1 Aug 2000 02:47:46 -0700 (PDT) (envelope-from hsw@antar.bryansk.ru) Received: from referent.intranet.antar.bryansk.ru (cream.antar.bryansk.ru [195.239.214.82]) by nau.antar.bryansk.ru (8.9.3/8.9.1) with ESMTP id NAA99024; Tue, 1 Aug 2000 13:56:41 +0400 (MSD) Date: Tue, 1 Aug 2000 13:47:37 +0400 From: Sergey Homenkow X-Mailer: The Bat! (v1.39) Educational Reply-To: Sergey Homenkow Organization: SSI X-Priority: 3 (Normal) Message-ID: <8574.000801@antar.bryansk.ru> To: sheldonh@FreeBSD.org Cc: freebsd-bugs@FreeBSD.org, yokota@FreeBSD.org Subject: Re[2]: kern/20335: S3Trio64V+ is detected as CGA by syscons In-reply-To: <200008010915.CAA84201@freefall.freebsd.org> References: <200008010915.CAA84201@freefall.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hello sheldonh, Tuesday, August 01, 2000, 1:15:52 PM, you wrote: sFo> Synopsis: S3Trio64V+ is detected as CGA by syscons sFo> State-Changed-From-To: open->feedback sFo> State-Changed-By: sheldonh sFo> State-Changed-When: Tue Aug 1 02:15:00 PDT 2000 sFo> State-Changed-Why: sFo> Could you send dmesg(8) output from the box after it's been sFo> started with ``boot -v'' from the loader prompt? sFo> Responsible-Changed-From-To: freebsd-bugs->yokota sFo> Responsible-Changed-By: sheldonh sFo> Responsible-Changed-When: Tue Aug 1 02:15:00 PDT 2000 sFo> Responsible-Changed-Why: sFo> Yokota-san is the syscons maintainer. sFo> http://www.freebsd.org/cgi/query-pr.cgi?pr=20335 Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.5-STABLE #0: Sat Jul 29 21:30:53 MSD 2000 root@zombie.antar.bryansk.ru:/usr/local/src/src3/sys/compile/ZOMBIE Calibrating clock(s) ... TSC clock: 199616911 Hz, i8254 clock: 1193210 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 199613058 Hz CPU: Pentium/P54C (199.61-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002bc000 - 0x07ff5fff, 131309568 bytes (32058 pages) config> di ppc0 config> config> port ed0 0x300 config> di apm0 No such device: apm0 Invalid command or syntax. Type `?' for help. config> fl wdc0 0xa0ffa0ff config> fl wdc1 0xa0ffa0ff config> fl sio0 0x20011 config> fl sio1 0x20001 config> q avail memory = 127356928 (124372K bytes) Found BIOS32 Service Directory header at 0xc00f7730 Entry = 0xfd7c0 (0xc00fd7c0) Rev = 0 Len = 1 PCI BIOS entry at 0x21c DMI header at 0xc00f7720 Version 2.0 Table at 0xf0c90, 36 entries, 1207 bytes Other BIOS signatures found: ACPI: 00000000 $PnP: 000f7760 Preloaded elf kernel "kernel" at 0xc02a3000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02a309c. pci_open(1): mode 1 addr port (0x0cf8) is 0x80003904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71008086) Probing for devices on PCI bus 0: found-> vendor=0x8086, dev=0x7100, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 chip0: rev 0x01 on pci0.0.0 found-> vendor=0x8086, dev=0x7110, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 chip1: rev 0x01 on pci0.7.0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 4, range 32, base 0000fcd0, size 4 ide_pci0: rev 0x01 on pci0.7.1 intel_piix_status: primary master sample = 3, master recovery = 1 intel_piix_status: primary master fastDMAonly disabled, pre/post enabled, intel_piix_status: IORDY sampling enabled, intel_piix_status: fast PIO enabled intel_piix_status: primary slave sample = 3, slave recovery = 1 intel_piix_status: primary slave fastDMAonly disabled, pre/post enabled, intel_piix_status: IORDY sampling enabled, intel_piix_status: fast PIO enabled ide_pci: busmaster 0 status: 40 from port: 0000fcd2 ide_pci: ide0:1 has been configured for DMA by BIOS intel_piix_status: secondary master sample = 3, master recovery = 1 intel_piix_status: secondary master fastDMAonly disabled, pre/post enabled, intel_piix_status: IORDY sampling enabled, intel_piix_status: fast PIO enabled intel_piix_status: secondary slave sample = 5, slave recovery = 4 intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled ide_pci: busmaster 1 status: 20 from port: 0000fcda ide_pci: ide1:0 has been configured for DMA by BIOS found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[0]: type 4, range 32, base 0000fce0, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x01 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 chip2: rev 0x01 on pci0.7.3 found-> vendor=0x5333, dev=0x8811, revid=0x00 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[0]: type 1, range 32, base fe000000, size 23 vga0: rev 0x00 int a irq 11 on pci0.14.0 found-> vendor=0x11f6, dev=0x2011, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[0]: type 4, range 32, base 0000fc00, size 7 map[1]: type 1, range 32, base fedffc00, size 7 wb0: rev 0x00 int a irq 10 on pci0.15.0 wb0: Ethernet address: 00:80:48:d8:3f:08 wb0: probing for a PHY wb0: checking address: 0 wb0: found PHY at address 0, vendor id: 180 device id: 7731 wb0: PHY type: wb0: PHY status word: 7849 wb0: 10Mbps half-duplex mode supported wb0: 10Mbps full-duplex mode supported wb0: 100Mbps half-duplex mode supported wb0: 100Mbps full-duplex mode supported wb0: autoneg supported wb0: autoneg complete, link status good (full-duplex, 100Mbps) bpf: wb0 attached Initializing PnP override table Probing for PnP devices: Trying Read_Port at 203 PnP: CSN 1 COMP_DEVICE_ID = 0x2fb0d041 CSN 1 Vendor ID: YMH0030 [0x3000a865] Serial 0x80860001 Comp ID: PNPb02f [0x2fb0d041] Called nullpnp_probe with tag 0x00000001, type 0x3000a865 Called nullpnp_probe with tag 0x00000001, type 0x2fb0d041 port 0x0220 0x0530 0x0388 0x0330 irq 5:0 drq 0:1 en 1 port 0x0220 0x0530 0x0388 0x0330 irq 5:0 drq 0:1 en 1 mss_attach 1 at 0x530 irq 5 dma 0:1 flags 0x11 setting up yamaha registers set yamaha master volume to max pcm1 (CS423x/Yamaha/AD1816 sn 0x80860001) at 0x530-0x537 irq 5 drq 0 flags 0x11 on isa Probing for devices on the ISA bus: atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0 on isa sc0: fb0 kbd0 sc0: CGA <16 virtual consoles, flags=0x0> ed0 not found at 0x300 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 03 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 03 64 psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x20011 on isa sio0: type ST16650A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 not found at 0x2f8 ppc0: disabled, not probed. pca0 on motherboard pca0: PC speaker audio driver fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa intel_piix_dmainit: setting ultra DMA mode 2 wd0: wdsetmode() setting transfer mode to 42 intel_piix_status: primary master sample = 3, master recovery = 1 intel_piix_status: primary master fastDMAonly disabled, pre/post enabled, intel_piix_status: IORDY sampling enabled, intel_piix_status: fast PIO enabled wdc0: unit 0 (wd0): , DMA, 32-bit, multi-block-16 wd0: 19470MB (39876480 sectors), 39560 cyls, 16 heads, 63 S/T, 512 B/S wd0: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 041f wdc0: unit 1 (wd1): , DMA, 32-bit, multi-block-16 wd1: 16555MB (33906432 sectors), 33637 cyls, 16 heads, 63 S/T, 512 B/S wd1: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 041f wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa wdc1: unit 0 (wd2): , DMA, 32-bit, multi-block-16 wd2: 19470MB (39876480 sectors), 39560 cyls, 16 heads, 63 S/T, 512 B/S wd2: ATA INQUIRE valid = 0007, dmamword = 0007, apio = 0003, udma = 041f vga0 at 0x3d0-0x3db maddr 0xb8000 msize 32768 on isa fb0: vga0, cga, type:CGA (3), flags:0x70041 fb0: port:0x3d0-0x3db, crtc:0x3d4, mem:0xb8000 0x8000 fb0: init mode:3, bios mode:3, current mode:3 fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k npx0 on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 174855744 bytes/sec bzero() bandwidth = 88097964 bytes/sec imasks: bio c008c040, tty c0071432, net c0071432 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging bpf: tun0 attached bpf: tun1 attached bpf: tun2 attached bpf: tun3 attached bpf: tun4 attached bpf: tun5 attached bpf: tun6 attached bpf: tun7 attached bpf: sl0 attached bpf: sl1 attached bpf: sl2 attached bpf: sl3 attached bpf: sl4 attached bpf: sl5 attached bpf: sl6 attached bpf: sl7 attached bpf: ppp0 attached bpf: ppp1 attached bpf: ppp2 attached bpf: ppp3 attached bpf: ppp4 attached bpf: ppp5 attached bpf: ppp6 attached bpf: ppp7 attached new masks: bio c008c040, tty c0071432, net c0071432 bpf: lo0 attached IP Filter: initialized. Default = pass all, Logging = enabled Considering FFS root f/s. changing root device to wd0s1a wd0s1: type 0xa5, start 63, end = 39876479, size 39876417 : OK start_init: trying /sbin/init wd2s1: type 0xa5, start 63, end = 39873329, size 39873267 : OK wd1s1: type 0xa5, start 63, end = 33897149, size 33897087 : OK wd1s1: type 0xa5, start 63, end = 33897149, size 33897087 : OK wd2s1: type 0xa5, start 63, end = 39873329, size 39873267 : OK Linux-ELF exec handler installed splash: image decoder found: star_saver pid 475 (msgs), uid 70: exited on signal 11 (core dumped) sc0: sc_switch_scr() 2 -- Best regards, Sergey mailto:hsw@antar.bryansk.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message