Date: Tue, 13 Mar 2001 15:29:36 -0600 From: Christopher Farley <chris@northernbrewer.com> To: Mike Tancsa <mike@sentex.net> Cc: questions@freebsd.org Subject: Re: 2GB limit on gzip? Message-ID: <20010313152934.A668@northernbrewer.com> In-Reply-To: <5.0.2.1.0.20010313160236.03ff3980@marble.sentex.ca>; from mike@sentex.net on Tue, Mar 13, 2001 at 04:03:56PM -0500 References: <20010312173441.A25752@dan.emsphone.com> <20010312195330.A82645@northernbrewer.com> <20010312213743.A7606@dan.emsphone.com> <20010312223210.A83134@northernbrewer.com> <SEN.984465737.22594891@news.sentex.net> <dd7sat4ke5rqbbc78f3h7ofmj0mguom82n@4ax.com> <20010313104513.A85546@northernbrewer.com> <5.0.2.1.0.20010313134412.040e25e0@marble.sentex.ca> <20010313150705.A86402@northernbrewer.com> <5.0.2.1.0.20010313160236.03ff3980@marble.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike Tancsa (mike@sentex.net) wrote:
>
> This sounds like some hardware issue (disk controller or memory). Post a
> dmesg to the list.
I am using an on-board Promise ATA/100 Controller. It would be pretty
easy for me to put my drives on the regular IDE bus and see if that
helps.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #1: Tue Mar 13 10:49:31 CST 2001
chris@seward.nbrewer.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (908.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 256901120 (250880K bytes)
Preloaded elf kernel "kernel" at 0xc044c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc044c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xd5800000-0xd580007f irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:28:53:60
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise ATA100 controller> port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem 0xd5000000-0xd501ffff irq 10 at device 17.0 on pci0
ata2: at 0xa000 on atapci1
ata3: at 0x9400 on atapci1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100
ad6: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata3-master UDMA100
acd0: CD-RW <PLEXTOR CD-R PX-W1210A> at ata1-master using PIO4
acd1: CDROM <ASUS CD-S500/A> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad4s1a
--
Christopher Farley
www.northernbrewer.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010313152934.A668>