From owner-freebsd-current Mon Mar 20 22:01:29 1995 Return-Path: current-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA00339 for current-outgoing; Mon, 20 Mar 1995 22:01:29 -0800 Received: from gndrsh.aac.dev.com (gndrsh.aac.dev.com [198.145.92.241]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id WAA00332 for ; Mon, 20 Mar 1995 22:01:26 -0800 Received: (from rgrimes@localhost) by gndrsh.aac.dev.com (8.6.8/8.6.6) id VAA03849 for freebsd-current@freebsd.org; Mon, 20 Mar 1995 21:59:10 -0800 From: "Rodney W. Grimes" Message-Id: <199503210559.VAA03849@gndrsh.aac.dev.com> Subject: Problems with ncr and CDROM drive To: freebsd-current@FreeBSD.org Date: Mon, 20 Mar 1995 21:59:09 -0800 (PST) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 1096 Sender: current-owner@FreeBSD.org Precedence: bulk I am trying to get a Chinon 525 (there new low cost double speed scsi-II cdrom drive) to work with the ncr controller. The drive seems to work just fine with my bt946c, but the ncr driver is rather unhappy about it :-(: ncr0 int a irq 9 on pci0:1 reg20: virtual=0xf1d03000 physical=0xfbfef000 ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 (V2 pl18 95/02/23) scbus0: (ncr0:0:0): "MICROP 2112-15MQ1001901 HQ30" is a type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1001MB (2051615 sectors), 1760 C 15 H 77 S/T 512 B/S (ncr0:6:0): "Chinon CD-ROM CDS-525 V10" is a type 5 removable SCSI 2 cd0(ncr0:6:0): CD-ROM cd0(ncr0:6:0): UNIT ATTENTION asc:28,0 Not ready to ready transition, medium may have changed cd0: could not get size drive empty Boy, and have the scsi error messages ever gotten screwed up :-(. Any one have any ideas??? -- Rod Grimes rgrimes@gndrsh.aac.dev.com Accurate Automation Company Custom computers for FreeBSD