Date: Thu, 5 Aug 2004 12:53:31 +0800 From: "nihaopaul" <Nihaopaul@hotmail.com> To: <aic7xxx@freebsd.org>, "Shaul Karl" <shaulk@013.net.il> Subject: Re: linux (debian), 2.6.7-2, hang. Message-ID: <BAY2-DAV17finLS6FJR0002aa1e@hotmail.com> References: <20040804224027.GA10185@rakefet>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message ----- From: "Shaul Karl" <shaulk@013.net.il> To: <aic7xxx@freebsd.org> Sent: Thursday, August 05, 2004 6:40 AM Subject: linux (debian), 2.6.7-2, hang. > The system gets hang from time to time. I believe this is an aic7xxx > related issue because when ever this happens the SCSI led activity > remains on. Other then that I don't have more information because the > logs shows nothing. Do give me instructions on how to get more > information. > The system runs kde and whenever I reboot kde display the last screen > shot that were displayed when the hang occurred and then runs kdm. > Some boot messages that shows some of the hardware follows: > > Aug 5 00:19:57 calanit kernel: Linux version 2.6.7-2.pentium2.1 (root@sitvanit) (gcc version 3.3.4 (Debian)) #1 Mon Jul 5 03:26:43 IDT 2004 > Aug 5 00:19:57 calanit kernel: ACPI disabled because your bios is from 99 and too old > Aug 5 00:19:57 calanit kernel: You can enable it with acpi=force > Aug 5 00:19:57 calanit kernel: Local APIC disabled by BIOS -- reenabling. > Aug 5 00:19:57 calanit kernel: Found and enabled local APIC! > Aug 5 00:19:57 calanit kernel: Initializing CPU#0 > Aug 5 00:19:57 calanit kernel: Using local APIC timer interrupts. > Aug 5 00:19:57 calanit kernel: calibrating APIC timer ... > Aug 5 00:19:57 calanit kernel: ..... CPU clock speed is 233.0823 MHz. > Aug 5 00:19:57 calanit kernel: ..... host bus clock speed is 66.0806 MHz. > Aug 5 00:19:57 calanit kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=1 > Aug 5 00:19:57 calanit kernel: PCI: Using configuration type 1 > Aug 5 00:19:57 calanit kernel: mtrr: v2.0 (20020519) > Aug 5 00:19:57 calanit kernel: PCI: Probing PCI hardware > Aug 5 00:19:57 calanit kernel: PCI: Probing PCI hardware (bus 00) > Aug 5 00:19:57 calanit kernel: PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0 > Aug 5 00:19:57 calanit kernel: VFS: Disk quotas dquot_6.5.1 > Aug 5 00:19:57 calanit kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Aug 5 00:19:57 calanit kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) > Aug 5 00:19:57 calanit kernel: devfs: boot_options: 0x0 > Aug 5 00:19:57 calanit kernel: Initializing Cryptographic API > Aug 5 00:19:57 calanit kernel: Limiting direct PCI/PCI transfers. > Aug 5 00:19:57 calanit kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled > Aug 5 00:19:57 calanit kernel: EISA: Probing bus 0 at eisa0 > Aug 5 00:19:57 calanit kernel: Cannot allocate resource for EISA slot 4 > Aug 5 00:19:57 calanit kernel: Cannot allocate resource for EISA slot 5 > Aug 5 00:19:57 calanit kernel: EISA: Detected 0 cards. > Aug 5 00:19:57 calanit kernel: SCSI subsystem initialized > Aug 5 00:19:57 calanit kernel: PCI: Found IRQ 11 for device 0000:00:11.0 > Aug 5 00:19:57 calanit kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 > Aug 5 00:19:57 calanit kernel: <Adaptec 2940 Ultra2 SCSI adapter (OEM)> > Aug 5 00:19:57 calanit kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs > Aug 5 00:19:57 calanit kernel: > Aug 5 00:19:57 calanit kernel: Using anticipatory io scheduler > Aug 5 00:19:57 calanit kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 31, 16bit) > Aug 5 00:19:57 calanit kernel: Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 5520 > Aug 5 00:19:57 calanit kernel: Type: Direct-Access ANSI SCSI revision: 02 > Aug 5 00:19:57 calanit kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253 > Aug 5 00:19:57 calanit kernel: (scsi0:A:1): 80.000MB/s transfers (40.000MHz, offset 30, 16bit) > Aug 5 00:19:57 calanit kernel: Vendor: IBM Model: DNES-309170W Rev: SAH0 > Aug 5 00:19:57 calanit kernel: Type: Direct-Access ANSI SCSI revision: 03 > Aug 5 00:19:57 calanit kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253 > Aug 5 00:19:57 calanit kernel: (scsi0:A:6): 10.000MB/s transfers (10.000MHz, offset 16) > Aug 5 00:19:57 calanit kernel: Vendor: TOSHIBA Model: XM6201TASUN32XCD Rev: 1103 > Aug 5 00:19:57 calanit kernel: Type: CD-ROM ANSI SCSI revision: 02 > Aug 5 00:19:57 calanit kernel: SCSI device sda: 17836668 512-byte hdwr sectors (9132 MB) > Aug 5 00:19:57 calanit kernel: SCSI device sda: drive cache: write back > Aug 5 00:19:57 calanit kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4 > Aug 5 00:19:57 calanit kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Aug 5 00:19:57 calanit kernel: SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB) > Aug 5 00:19:57 calanit kernel: SCSI device sdb: drive cache: write back > Aug 5 00:19:57 calanit kernel: /dev/scsi/host0/bus0/target1/lun0: p1 p2 > Aug 5 00:19:57 calanit kernel: Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 > Aug 5 00:19:57 calanit kernel: EXT3-fs: INFO: recovery required on readonly filesystem. > > > Thank you. > -- > "If you have an apple and I have an apple and we exchange apples then > you and I will still each have one apple. But if you have an idea and I > have an idea and we exchange these ideas, then each of us will have two > ideas." -- George Bernard Shaw (sent by shaulk @ 013 . net . il) > _______________________________________________ > aic7xxx@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/aic7xxx > To unsubscribe, send any mail to "aic7xxx-unsubscribe@freebsd.org" > you could set up a serial terminal console to log to another box, I had done it with FreeBSD like Justin Gibbs suggested, you'll have to do a little googling for it but it is a possibility (I hope. I was running FreeBSD). as for your problem things I would look into is.. > Aug 5 00:19:57 calanit kernel: ACPI disabled because your bios is from 99 and too old > Aug 5 00:19:57 calanit kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 > Aug 5 00:19:57 calanit kernel: Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 5520 > Aug 5 00:19:57 calanit kernel: Vendor: IBM Model: DNES-309170W Rev: SAH0 check for bios, firmware and driver updates for your mobo/scsi controller and drives ;)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY2-DAV17finLS6FJR0002aa1e>