Date: Mon, 21 May 2007 12:07:28 +0300 From: Krassimir Slavchev <krassi@bulinfo.net> To: freebsd-stable@freebsd.org Subject: Intel Matrix RAID (ICH8R) rebuild? Message-ID: <46516150.5090705@bulinfo.net>
next in thread | raw e-mail | index | archive | help
Hello, I have problems rebuilding RAID1 array. The bios shows status 'Rebuild' and 'Volumes with "Rebuild" status will be rebuilt within the operating system'. When I try to do 'atacontrol rebuild ar0': atacontrol: ioctl(IOCATARAIDREBUILD): Device not configured I run 6.2-STABLE: dmesg: ... atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0 atapci1: AHCI Version 01.10 controller with 6 ports detected ata5: <ATA channel 0> on atapci1 ata6: <ATA channel 1> on atapci1 ata7: <ATA channel 2> on atapci1 ata8: <ATA channel 3> on atapci1 ata9: <ATA channel 4> on atapci1 ata10: <ATA channel 5> on atapci1 ... ad10: 152627MB <Seagate ST3160811AS 3.AAE> at ata5-master SATA300 ad12: 152627MB <Seagate ST3160811AS 3.AAE> at ata6-master SATA300 ar0: 152625MB <Intel MatrixRAID RAID1> status: READY ar0: disk0 READY (master) using ad10 at ata5-master ar0: disk1 READY (mirror) using ad12 at ata6-master pciconf -lv: atapci1@pci0:31:2: class=0x010400 card=0x81ec1043 chip=0x28228086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = RAID atacontrol status ar0: ar0: ATA RAID1 subdisks: ad10 ad12 status: READY The motherboard is Asus P5-E. How to rebuild my RAID? Thanks in advance
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46516150.5090705>