Date: Thu, 04 Dec 2008 17:37:23 -0500 From: Mike Tancsa <mike@sentex.net> To: Hans Petter Selasky <hselasky@c2i.net>, freebsd-usb@freebsd.org Subject: Re: ucom serial bug? Message-ID: <200812042237.mB4MbWLK018707@lava.sentex.ca> In-Reply-To: <200812042320.48818.hselasky@c2i.net> References: <200812041853.35539.hselasky@c2i.net> <49382D74.1030907@sentex.net> <49385176.3070104@sentex.net> <200812042320.48818.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
At 05:20 PM 12/4/2008, Hans Petter Selasky wrote:
>On Thursday 04 December 2008, Gabor wrote:
> > Some more twists to this. As I said if I kill off our program and restart
> > it, it never sees carrier unless the module was reloaded. However, if I
> > unplug the serial cable from the Windows box and re-plug it, carrier goes
> > and comes back as expected but only as long as our software is running. If
> > our software is not running and we unplug the serial cable from the Windows
> > box, carrier does not come back when we start up our program with the cable
> > plugged back in.
>
>Maybe you can try setting the MSR to zero when the modem is opened in the
>uftdi.c driver file.
>
>In USB2 there is also a sysctl for UFTDI debugging which you can check.
Hi,
In the regular USB stack, I did run it with some debugging
enabled. The diff between the first run and the second run is below
using Gabor's check carrier program
I havent tried with debugging enabled and just pulling the serial
cable out yet. I will try that tomorrow when back at the office!
In terms of setting the MSR to zero, do you mean in
static int uftdi_open(void *vsc, int portno)
?
First run where the program sees carrier
: ucom0 on uhub3
: ucomtty_param: sc = 0xc47faa80
: ucomstopread: enter
: ucomstopread: bulkin pipe NULL
: uftdi_param: sc=0xc47faa80
: ucomstartread: start
: ucom_dtr: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=1
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: ucom0: ucomtty_open: tp = 0xc4c7c800
: ucom_dtr: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=1
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: uftdi_open: sc=0xc47faa80
: uftdi_param: sc=0xc47faa80
: ucomtty_open: open pipes in = 129 out = 2
: ucomstartread: start
: ucomioctl: cmd = 0x402c7413
: ucomioctl: cmd = 0x802c7414
: ucomtty_param: sc = 0xc47faa80
: ucomstopread: enter
: ucomreadcb: status = 6
: ucomstopread: leave
: uftdi_param: sc=0xc47faa80
: ucomstartread: start
: ucomioctl: cmd = 0x8004667e
: ucomioctl: cmd = 0x8004667d
: ucomioctl: cmd = 0x4004746a
: ucomioctl: cmd = 0x4004746a
: ucomioctl: cmd = 0x8004746d
: ucom_dtr: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=1
: ucomreadcb: status = 0
: ucomreadcb: got 2 chars, tp = 0xc4c7c800
: uftdi_read: status change msr=0xb0(0x00) lsr=0x60(0x00)
: uftdi_status: msr=0xb0 lsr=0x60
: ucom_status_change: about to check sc->sc_poll it is 1
: ucom_status_change: DCD changed to 1
: ucomstartread: start
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: ucomioctl: cmd = 0x4004746a
: ucom0: ucomtty_close
: ucom_cleanup: closing pipes
: ucom_shutdown
: ucom_dtr: onoff = 0
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=0
: ucomreadcb: status = 0
: ucomreadcb: got 2 chars, tp = 0xc4c7c800
: uftdi_read: status change msr=0x00(0xb0) lsr=0x60(0x60)
: uftdi_status: msr=0x00 lsr=0x60
: ucom_status_change: about to check sc->sc_poll it is 1
: ucom_status_change: DCD changed to 0
: ucomstartread: start
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: ucomreadcb: status = 0
: ucomreadcb: got 2 chars, tp = 0xc4c7c800
: uftdi_read: status change msr=0xb0(0x00) lsr=0x60(0x60)
: uftdi_status: msr=0xb0 lsr=0x60
: ucom_status_change: about to check sc->sc_poll it is 1
: ucom_status_change: DCD changed to 1
: ucomstartread: start
: ucomreadcb: status = 6
and second run, where it does not
: ucomtty_param: sc = 0xc47faa80
: ucomstopread: enter
: ucomstopread: leave
: uftdi_param: sc=0xc47faa80
: ucomstartread: start
: ucom_dtr: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=1
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: ucom0: ucomtty_open: tp = 0xc4c7c800
: ucom_dtr: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=1
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: uftdi_open: sc=0xc47faa80
: uftdi_param: sc=0xc47faa80
: ucomtty_open: open pipes in = 129 out = 2
: ucomstartread: start
: ucomioctl: cmd = 0x402c7413
: ucomioctl: cmd = 0x802c7414
: ucomtty_param: sc = 0xc47faa80
: ucomstopread: enter
: ucomreadcb: status = 6
: ucomstopread: leave
: uftdi_param: sc=0xc47faa80
: ucomstartread: start
: ucomioctl: cmd = 0x8004667e
: ucomioctl: cmd = 0x8004667d
: ucomioctl: cmd = 0x4004746a
: ucomioctl: cmd = 0x4004746a
: ucomioctl: cmd = 0x8004746d
: ucom_dtr: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=1
: ucomreadcb: status = 0
: ucomreadcb: got 2 chars, tp = 0xc4c7c800
: ucomstartread: start
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: ucomioctl: cmd = 0x4004746a
: ucom0: ucomtty_close
: ucom_cleanup: closing pipes
: ucom_shutdown
: ucom_dtr: onoff = 0
: uftdi_set: sc=0xc47faa80, port=1 reg=1 onoff=0
: ucomreadcb: status = 0
: ucomreadcb: got 2 chars, tp = 0xc4c7c800
: uftdi_read: status change msr=0x00(0xb0) lsr=0x60(0x60)
: uftdi_status: msr=0x00 lsr=0x60
: ucomstartread: start
: ucom_rts: onoff = 1
: uftdi_set: sc=0xc47faa80, port=1 reg=2 onoff=1
: ucomreadcb: status = 0
: ucomreadcb: got 2 chars, tp = 0xc4c7c800
: uftdi_read: status change msr=0xb0(0x00) lsr=0x60(0x60)
: uftdi_status: msr=0xb0 lsr=0x60
: ucom_status_change: about to check sc->sc_poll it is 1
: ucom_status_change: DCD changed to 1
: ucomstartread: start
: ucomreadcb: status = 6
% diff a b
2d1
< : ucom0 on uhub3
5c4
< : ucomstopread: bulkin pipe NULL
---
> : ucomstopread: leave
38,41d36
< : uftdi_read: status change msr=0xb0(0x00) lsr=0x60(0x00)
< : uftdi_status: msr=0xb0 lsr=0x60
< : ucom_status_change: about to check sc->sc_poll it is 1
< : ucom_status_change: DCD changed to 1
55,56d49
< : ucom_status_change: about to check sc->sc_poll it is 1
< : ucom_status_change: DCD changed to 0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200812042237.mB4MbWLK018707>