Date: Tue, 02 Mar 2004 14:17:58 -0800 From: Rishi Chopra <rchopra@cal.berkeley.edu> To: Ion-Mihai Tetcu <itetcu@apropo.ro> Cc: freebsd-questions@freebsd.org Subject: Re: Problems Mounting CDROM Message-ID: <40450816.4040207@cal.berkeley.edu> In-Reply-To: <20040302220640.3b0cf832@it.buh.cameradicommercio.ro> References: <404402DE.7040201@cal.berkeley.edu> <4044047A.7020906@users.sourceforge.net> <404439B6.9000801@cal.berkeley.edu> <40443C19.1090109@daleco.biz> <40444715.9050407@cal.berkeley.edu> <40444D08.8040603@circlesquared.com> <4044E4B0.2000208@cal.berkeley.edu> <20040302220640.3b0cf832@it.buh.cameradicommercio.ro>
next in thread | previous in thread | raw e-mail | index | archive | help
The drive is IDE, but it doesn't seem to show up. Any idea what the problem might be? Ion-Mihai Tetcu wrote: > On Tue, 02 Mar 2004 11:46:56 -0800 > Rishi Chopra <rchopra@cal.berkeley.edu> wrote: > > >>Here's the dmesg (Kernel config also included below): >> >>Copyright (c) 1992-2003 The FreeBSD Project. >>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >>FreeBSD 5.1-RELEASE #0: Sat Dec 13 07:05:15 PST 2003 >> root@idfubar.dyndns.org:/usr/src/sys/i386/compile/VISION >>Preloaded elf kernel "/boot/kernel/kernel" at 0xc068f000. >>Timecounter "i8254" frequency 1193182 Hz >>Timecounter "TSC" frequency 119752863 Hz >>CPU: Pentium/P54C (119.75-MHz 586-class CPU) >> Origin = "GenuineIntel" Id = 0x525 Stepping = 5 >> Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> >>real memory = 100663296 (96 MB) >>avail memory = 90685440 (86 MB) >>Intel Pentium detected, installing workaround for F00F bug >>npx0: <math processor> on motherboard >>npx0: INT 16 interface >>pcibios: BIOS version 2.10 >>pcib0: <Host to PCI bridge> at pcibus 0 on motherboard >>pci0: <PCI bus> on pcib0 >>isab0: <PCI-ISA bridge> at device 7.0 on pci0 >>isa0: <ISA bus> on isab0 >>atapci0: <Intel PIIX WDMA2 controller> port 0xffa0-0xffaf at device 7.1 >>on pci0 >>atapci0: Busmastering DMA not supported >>ata0: at 0x1f0 irq 14 on atapci0 >>ata1: at 0x170 irq 15 on atapci0 >>pci0: <display, VGA> at device 13.0 (no driver attached) >>asr0: <Adaptec Caching SCSI RAID> mem 0xf0000000-0xf7ffffff irq 5 at >>device 14.0 on pci0 >>asr0: major=154 >>asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O >>pcib1: <PCI-PCI bridge> at device 14.1 on pci0 >>pci1: <PCI bus> on pcib1 >>rl0: <RealTek 8139 10/100BaseTX> port 0xf880-0xf8ff mem >>0xfffbfc00-0xfffbfc7f irq 9 at device 15.0 on pci0 >>rl0: Ethernet address: 00:00:b4:91:28:03 >>miibus0: <MII bus> on rl0 >>rlphy0: <RealTek internal media interface> on miibus0 >>rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>rl1: <RealTek 8139 10/100BaseTX> port 0xfc00-0xfcff mem >>0xfffb7c00-0xfffb7cff irq 10 at device 16.0 on pci0 >>rl1: Realtek 8139B detected. Warning, this may be unstable in autoselect >>mode >>rl1: Ethernet address: 00:50:fc:21:df:8f >>miibus1: <MII bus> on rl1 >>rlphy1: <RealTek internal media interface> on miibus1 >>rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>orm0: <Option ROMs> at iomem >>0xed000-0xedfff,0xc8000-0xcdfff,0xc0000-0xc7fff on isa0 >>pmtimer0 on isa0 >>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 >>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >>kbd0 at atkbd0 >>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port >>0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 >>fdc0: FIFO enabled, 8 bytes threshold >>fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >>ppbus0: <Parallel port bus> on ppc0 >>plip0: <PLIP network interface> on ppbus0 >>lpt0: <Printer> on ppbus0 >>lpt0: Interrupt-driven port >>ppi0: <Parallel I/O> on ppbus0 >>sc0: <System console> at flags 0x100 on isa0 >>sc0: VGA <16 virtual consoles, flags=0x300> >>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >>sio0: type 16550A >>sio1 at port 0x2f8-0x2ff irq 3 on isa0 >>sio1: type 16550A >>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >>unknown: <PNP0303> can't assign resources (port) >>unknown: <PNP0700> can't assign resources (port) >>unknown: <PNP0400> can't assign resources (port) >>unknown: <PNP0501> can't assign resources (port) >>unknown: <PNP0501> can't assign resources (port) >>Timecounters tick every 10.000 msec >>ipfw2 initialized, divert enabled, rule-based forwarding enabled, >>default to deny, logging disabled >>da0 at asr0 bus 0 target 0 lun 0 >>da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device >>da0: 572202MB (1171869696 512 byte sectors: 255H 63S/T 72945C) >>Mounting root from ufs:/dev/da0s1a >>WARNING: / was not properly dismounted >>WARNING: /usr was not properly dismounted >>WARNING: /var was not properly dismounted >> >>Kernel config file shows the following: >> >>options CD9660 #ISO 9660 Filesystem >>device atapicd # ATAPI CDROM drives >>device cd # CD > > > It doesn't show up any atapi (IDE) CDROM. Is it IDE ? If not, do you > have the appropriate SCSI in your kernel ? > > > -- Rishi Chopra http://www.ocf.berkeley.edu/~rchopra
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40450816.4040207>