From owner-freebsd-questions Fri Dec 25 01:19:11 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id BAA21768 for freebsd-questions-outgoing; Fri, 25 Dec 1998 01:19:11 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from wildstar.net (lunar.chatsystems.com [209.198.8.14]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id BAA21763 for ; Fri, 25 Dec 1998 01:19:09 -0800 (PST) (envelope-from stab@wildstar.net) Received: from mercury.wildstar.net (stab@mercury.wildstar.net [209.198.8.11]) by wildstar.net with ESMTP id DAA21437 for ; Fri, 25 Dec 1998 03:29:54 -0600 (CST) Date: Fri, 25 Dec 1998 03:29:54 -0600 (CST) From: stab Message-Id: <199812250929.DAA21437@wildstar.net> To: freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, when I try to do a 'make world', I have various problems with my compiler. I get the following error a little while after I being: Dec 24 21:23:07 oblivion /kernel: pid 28575 (cc1), uid 0: exited on signal 11 (core dumped) ( I believe it did the same thing on signal 10, but I could be wrong ) Is there settings I should change in my bios? (amibios 2.5) or things I should add to my kernel? This is my dmesg output: Please reply to stab@wildstar.net Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.8-STABLE #0: Mon Dec 21 18:13:01 GMT 1998 stab@oblivion:/usr/src/sys/compile/oblivion Calibrating clock(s) ... i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CPU: Cyrix 6x86 (486-class CPU) Origin = "CyrixInstead" DIR=0x1531 Stepping=1 Revision=5 CPU cache: write-through mode real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00202000 - 0x03ffdfff, 64995328 bytes (15868 pages) avail memory = 63528960 (62040K bytes) pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00007680 pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=55911039) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 2 on pci0:0:0 mapreg[10] type=0 addr=fc000000 size=2000000. pci0:0:1: Silicon Integrated Systems, device=0x5513, class=storage (ide) int a irq ?? [no driver assigned] map(10): io(9567d8a0) map(14): io(7732b518) map(18): io(6e84f7a8) map(1c): io(25d26554) map(20): io(4000) chip1 rev 1 on pci0:1:0 pci0:1:1: Silicon Integrated Systems, device=0x0009, class=0xff, subclass=0x00 [no driver assigned] chip2 rev 0 on pci0:2:0 bridge from pci0 to pci1 through 1. mapping regs: io:2000c0c0 mem:fb50fb50 pmem:fb30fb30 vga0 rev 227 int a irq ?? on pci0:11:0 mapreg[10] type=0 addr=ff800000 size=200000. mapreg[14] type=0 addr=ffaf0000 size=10000. pci0: uses 35717120 bytes of memory from fb300000 upto ffafffff. pci0: subordinate busses from 1 upto 1. Probing for devices on PCI bus 1: Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers in BIOS for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA registers to be used for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: rows_offset:1 sc0: VGA color <16 virtual consoles, flags=0x0> sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 not found at 0xffffffff fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 267MB (547470 sectors), 869 cyls, 10 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S npx0 on motherboard npx0: INT 16 interface imasks: bio c0084040, tty c003001a, net c0060000 BIOS Geometries: 0:0363093f 0..867=868 cylinders, 0..9=10 heads, 1..63=63 sectors 1:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: tun0 attached bpf: ppp0 attached new masks: bio c0084040, tty c003001a, net c007001a bpf: lo0 attached Considering FFS root f/s. wd1s1: type 0xa5, start 63, end = 2503871, size 2503809 : OK wd0s4: type 0x6, start 63, end = 546839, size 546777 : OK To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message