From owner-freebsd-hackers Mon Jun 2 02:25:12 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id CAA09395 for hackers-outgoing; Mon, 2 Jun 1997 02:25:12 -0700 (PDT) Received: from bss.co.za (cerberus.bss.co.za [196.31.61.10]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id CAA09387 for ; Mon, 2 Jun 1997 02:24:52 -0700 (PDT) Received: by cerberus.bss.co.za id <17952-1>; Mon, 2 Jun 1997 11:26:37 +0200 Comments: Authenticated sender is From: "Andy Bontoft" Organization: CORE NetWatch Ltd To: hackers@FreeBSD.ORG Date: Mon, 2 Jun 1997 13:49:54 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: RE: SMC9332BDT help needed please Reply-to: andy@bss.co.za Priority: normal X-mailer: Pegasus Mail for Win32 (v2.53/R1) Message-Id: <97Jun2.112637gmt+0200.17952-1@cerberus.bss.co.za> Sender: owner-hackers@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi I hope someone will be able to tell me what i'm doing wrong here. I'm trying to get an SMC9332BDT to work under 2.2.1-RELEASE (at 10Mbps). The card seems to be probed fine, and is initially being set to 100Mbps. The 'Link Integrity Indicator' (according to the manual) LED goes out as soon as the probe takes place and doesn't come back on. I have used ifconfig de0 -link2 to try and switch it over to 10Mbps and get kernel messages stating this is taking place. From this point on de0: transmission timeout messages are displayed although thay are not displayed before i try to switch the port. I have tried four different cards just to make sure it wasn't a dodgey card and used the SMC diagnostic program under DOS to transmit packets from the card which i can see with tcpdump on another machine.... Any ideas?? Thanx in advance for your time. andy BTW this card is UTP only, and i've searched through the old postings on www.freebsd.org but can't seem to find a solution. Boot and messages info.. CPU: Pentium (199.43-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 67108864 (65536K bytes) avail memory = 62599168 (61132K bytes) pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x80000058 pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=12508086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 3 on pci0:0 chip1 rev 1 on pci0:7:0 chip2 rev 0 on pci0:7:1 mapreg[20] type=1 addr=0000f000 size=0010. I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: disabled Mouse IRQ12: disabled Interrupt Routing: A: , B: , C: , D: MB0: , MB1: de0 rev 34 int a irq 12 on pci0:17 mapreg[10] type=1 addr=00006100 size=0080. mapreg[14] type=0 addr=e0000000 size=0080. reg16: ioaddr=0x6100 size=0x80 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:e0:29:06:3f:02 de0: enabling 100baseTX port [ snip ] May 31 18:32:26 skoll /kernel: de0: enabling 100baseTX port May 31 18:32:27 skoll /kernel: de0: enabling 10baseT port May 31 18:32:28 skoll /kernel: de0: transmission timeout May 31 18:32:32 skoll /kernel: de0: transmission timeout May 31 18:33:47 skoll /kernel: de0: transmission timeout