Date: Thu, 27 Apr 2017 18:10:22 +1200 From: Jonathan Chen <jonc@chen.org.nz> To: Karl Denninger <karl@denninger.net> Cc: freebsd-arm@freebsd.org Subject: Re: RPI2 LED indicators on STABLE-11 Message-ID: <CAJuc1zPWY5ytLp3ez=2-q_Zw%2BiaGH2A6ZS_g-2yHCvVEsLcAwg@mail.gmail.com> In-Reply-To: <e9a1408b-bb9b-032d-ca20-3775b07402c5@denninger.net> References: <CAJuc1zOnFZMNMvrEtMiPmd2_7an%2BT=yRuBMjsr1jEaaZEW9RCg@mail.gmail.com> <e9a1408b-bb9b-032d-ca20-3775b07402c5@denninger.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 27 April 2017 at 15:15, Karl Denninger <karl@denninger.net> wrote: > On 4/26/2017 17:16, Jonathan Chen wrote: >> Hi, >> >> I recently updated my RPI2 to STABLE-11, r317393, and I notice that >> the LED lights do not behave as expected. The power LED lights up as >> expected with uldr, but when the FreeBSD kernel boot messages start >> appearing, the red power LED switches off. The green activity LED >> never powers up. Is there something I have to do to get >> FreeBSD-11/armv6 to turn on the LED indicators? >> > What you are observing is normal. If you want the green LED to power up > (flash, etc) you need to do it programmatically. Ah. Thanks for that. I've just noticed /dev/led/act and /dev/led/pwr. I'm now hunting for docs to see what I can do with them. Cheers. -- Jonathan Chen <jonc@chen.org.nz>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJuc1zPWY5ytLp3ez=2-q_Zw%2BiaGH2A6ZS_g-2yHCvVEsLcAwg>