Date: Mon, 5 Feb 2007 23:29:25 +0300 From: artem_kim@inbox.ru To: freebsd-scsi@freebsd.org, Anton Yuzhaninov <citrin@citrin.ru> Subject: Re: Problem with AIC-7902B Ultra320 SCSI Controller Message-ID: <200702052329.25334.artem_kim@inbox.ru> In-Reply-To: <1579877114.20070130145649@citrin.ru> References: <1579877114.20070130145649@citrin.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 30 January 2007 14:56, Anton Yuzhaninov wrote: > Hello, freebsd-scsi. > > At boot time kernel write to logs: > > Jan 30 10:35:15 cf2 kernel: Waiting 5 seconds for SCSI devices to settle > Jan 30 10:35:15 cf2 kernel: ahd1: SCSI Cell parity error SSTAT3 == 0x2 > Jan 30 10:35:15 cf2 kernel: ahd1: Missing case in ahd_handle_scsiint. > status = 0 Jan 30 10:35:15 cf2 kernel: >>>>>>>>>>>>>>>>>> Dump Card State > Begins <<<<<<<<<<<<<<<<< Jan 30 10:35:15 cf2 kernel: ahd1: Dumping Card > State at program address 0x32 Mode 0x33 Jan 30 10:35:15 cf2 kernel: Card > was paused > .... [skipped] ... > Jan 30 10:35:15 cf2 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends > >>>>>>>>>>>>>>>>>> Jan 30 10:35:15 cf2 kernel: ahd0: SCSI Cell parity error > SSTAT3 == 0x2 Jan 30 10:35:15 cf2 kernel: ahd0: Missing case in > ahd_handle_scsiint. status = 0 Jan 30 10:35:15 cf2 kernel: > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Jan 30 10:35:15 > cf2 kernel: ahd0: Dumping Card State at program address 0x2 Mode 0x33 Jan > 30 10:35:15 cf2 kernel: Card was paused > .... [skipped] ... > Jan 30 10:35:15 cf2 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends > >>>>>>>>>>>>>>>>>> Jan 30 10:35:15 cf2 kernel: ses0 at ahd0 bus 0 target 6 > lun 0 > Jan 30 10:35:15 cf2 kernel: ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 > device Jan 30 10:35:15 cf2 kernel: ses0: 3.300MB/s transfers > Jan 30 10:35:15 cf2 kernel: ses0: SAF-TE Compliant Device > Jan 30 10:35:15 cf2 kernel: da0 at ahd0 bus 0 target 0 lun 0 > Jan 30 10:35:15 cf2 kernel: da0: <FUJITSU MAT3073NC 0108> Fixed Direct > Access SCSI-3 device Jan 30 10:35:15 cf2 kernel: da0: 320.000MB/s transfers > (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jan 30 10:35:15 > cf2 kernel: da0: 70136MB (143638992 512 byte sectors: 255H 63S/T 8941C) Jan > 30 10:35:15 cf2 kernel: da1 at ahd0 bus 0 target 2 lun 0 > Jan 30 10:35:15 cf2 kernel: da1: <FUJITSU MAT3073NC 0108> Fixed Direct > Access SCSI-3 device Jan 30 10:35:15 cf2 kernel: da1: 320.000MB/s transfers > (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled Jan 30 10:35:15 > cf2 kernel: da1: 70136MB (143638992 512 byte sectors: 255H 63S/T 8941C) > > ahd0@pci2:3:0: class=0x010000 card=0x081115d9 chip=0x801d9005 rev=0x10 > hdr=0x00 vendor = 'Adaptec Inc' > device = 'AIC-7902B Ultra320 SCSI Controller' > class = mass storage > subclass = SCSI > > 6.2-RELEASE i386 > > Full log at http://pastebin.com/871132 > > Is there any problem with controller or driver? I had similar problems with Supermicro X6DHR-8G2 and FreeBSD 5.4 (ia32). The system was started, if I used "safe mode" or "hint.apic.0.disabled=1" in loder.conf. But the correct decision of a problem in my case was updating BIOS of a MB. -- ártem Kim mailto: artem_kim@inbox.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200702052329.25334.artem_kim>