Date: Thu, 29 Dec 2022 14:51:17 -0600 From: "Mike Karels" <mike@karels.net> To: "Mark Millard" <marklmi@yahoo.com> Cc: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: rpi3b+ ue0 too late to be configured on boot? Message-ID: <EE99F2B0-21EF-4E3B-A7A7-1248E948AFE0@karels.net> In-Reply-To: <09EDBF79-75B7-486E-AE85-07E6FFA2FED3@yahoo.com> References: <8srop579-r4sq-278-356p-nr7q81n31s4@mnoonqbm.arg> <52FD04A5-27B4-4C61-9C97-795D2D65135E@karels.net> <09EDBF79-75B7-486E-AE85-07E6FFA2FED3@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 29 Dec 2022, at 14:38, Mark Millard wrote: > On Dec 29, 2022, at 11:39, Mike Karels <mike@karels.net> wrote: > >> On 28 Dec 2022, at 16:42, Bjoern A. Zeeb wrote: >> >>> Hi, >>> >>> does anyone else have the problem on latest main that the ue0 on an >>> rpi3b+ doesn't show up in time for the rc netif to configure it (or=20 >>> at >>> least it looks like)? >> >> I don=E2=80=99t see that problem. I tried the 12/24 snapshot of main = on an >> RPi3B+, and ue0 configured via DHCP on the initial boot, and on a=20 >> reboot. > > Are you also using EDK2's UEFI via the boot materials from: > > https://github.com/pftf/RPi3/releases/tag/v1.38 > > instead of the using the normal FreeBSD ports used in official > builds (the RPi firmware and a U-Boot)? The "pfpt" RPi3 materials > include both RPi* firmware and the EDK2 based material. No, this was the unmodified snapshot with the standard boot files (and thus not UEFI). Mike > Bjoern did not report enough information for the configuration > of that EDK2 based context to replicate his boot context in a > test. > > I'll note that the intructions for that EDK2 variant indicate > that linux should not use ACPI but instead should use the > Device Tree. As I remember, the ACPI is documented somewhere > to follow some non-standard Microsoft specifics. (The RPi4 > "pfpt" does not have the same issue.) Some related quotes > from https://github.com/pftf/RPi3 are: > > QUOTE > With recent Linux installs, please assure that the > firmware is running in DT mode, either via > "Device Manager"->"Raspberry Pi Configuration" > ->"Advanced Configuration"->"System Table Selection" > or the Linux/Grub command line with "acpi=3Doff". > END QUOTE > >> I did have problems with the HDMI console, some of which are new; I=20 >> will >> follow up on that separately. Specifically, USB keyboard input=20 >> didn=E2=80=99t >> work to the loader, and I didn=E2=80=99t see console output from user-= level >> startup until I disabled boot_multicons and boot_serial. The second >> problem is relatively new. >> >> Mike >> >>> While during boot USB seems to need a wait-delay now, which it=20 >>> hadn't in >>> the last years for me? >>> >>> ---------------------------------------------------------------------= --- >>> ... >>> Feeding entropy: . >>> ELF ldconfig path: /lib /usr/lib >>> ugen1.2: <vendor 0x0424 product 0x9514> at usbus1 >>> uhub1 on uhub0 >>> uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr=20 >>> 2> on usbus1 >>> uhub1: MTT enabled >>> lo0: link state changed to UP >>> uhub1: 5 ports with 4 removable, self powered >>> ugen1.3: <vendor 0x0424 product 0xec00> at usbus1 >>> smsc0 on uhub1 >>> smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on=20 >>> usbus1 >>> smsc0: chip 0xec00, rev. 0002 >>> miibus0: <MII bus> on smsc0 >>> smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0 >>> smscphy0: OUI 0x00800f, model 0x000c, rev. 3 >>> smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> ue0: <USB Ethernet> on smsc0 >>> ue0: bpf attached >>> ue0: Ethernet address: xx:xx:xx:xx:xx:xx >>> Starting Network: lo0. >>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>> ... >>> ---------------------------------------------------------------------= --- >>> >>> If running manually after boot (again) it all works fine? >>> >>> # sh /etc/rc.d/netif start ue0 >>> smsc0: chip 0xec00, rev. 0002 >>> Starting Network: ue0. >>> ue0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mt= u=20 >>> 1500 >>> ... >>> >>> >>> >>> Not that it should matter - this is with=20 >>> https://github.com/pftf/RPi3/releases/tag/v1.38 >>> >>> /bz >>> >>> --=20 >>> Bjoern A. Zeeb =20 >>> r15:7 >> > > =3D=3D=3D > Mark Millard > marklmi at yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EE99F2B0-21EF-4E3B-A7A7-1248E948AFE0>