Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 8 Jan 2012 10:55:42 -0600
From:      Mike Cochran <vongrippen@gmail.com>
To:        Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no>
Cc:        freebsd-ppc@freebsd.org
Subject:   Re: PowerBook G3 (Pismo/Firewire) Install CD Hangs
Message-ID:  <CAGR6j=z=p%2BnVQcoEU4OAR5kVFEtAcwYTHf1cn0gbnKvURY4N4A@mail.gmail.com>
In-Reply-To: <20120108174834.8237f708.torfinn.ingolfsen@broadpark.no>
References:  <CAGR6j=w44AQT6oCEbmNrVayBqOCK65tMThe1NiVZWgu_ijGcpQ@mail.gmail.com> <20120108174834.8237f708.torfinn.ingolfsen@broadpark.no>

next in thread | previous in thread | raw e-mail | index | archive | help
The exact same result as just boot -v unfortunately:

> The last 10 lines of a verbose boot (boot -v):
> ata0: stat0=50 err=0x01 lab=0x00 msb=0x00
> ata0: stat1=00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1
> (aprobe0:ata0:0:0:0): SIGNATURE: 0000
> ata1: reset tp1 mask=03 ostat0=00 ostat1=00
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
> ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
> ata1: reset tp2 stat0=00 stat1=00 devices=0x0

On Sun, Jan 8, 2012 at 10:48 AM, Torfinn Ingolfsen
<torfinn.ingolfsen@broadpark.no> wrote:
> On Sat, 07 Jan 2012 23:48:56 -0600
> Mike Cochran <vongrippen@gmail.com> wrote:
>
>> My thinking at first was possibly DMA trouble with the ATA controller,
>> because I've noticed some people have had some issues on PowerMacs,
>> but disabling DMA (set hw.ata.atapi_dma=0) didn't change anything.
>
> Have you tried this in combination with boot -v?
> On at least one PowerPC machine it was needed for me (but that machine was G5, it was before 9.0-release, YMMV).
> HTH
> --
> Torfinn
>
> _______________________________________________
> freebsd-ppc@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGR6j=z=p%2BnVQcoEU4OAR5kVFEtAcwYTHf1cn0gbnKvURY4N4A>