Date: Sun, 10 Oct 2004 21:21:24 +0200 From: "Thomas (Pronto) Wildgruber" <prosys@01019freenet.de> To: <aic7xxx@freebsd.org> Subject: Errormessages at mounting a SCSI device Message-ID: <HDEBIHPJPBCBMNIMFGFAOEOCCEAA.prosys@01019freenet.de>
next in thread | raw e-mail | index | archive | help
Hi List,
can anybody out there read the following erromessage, created by Linux
RedHat9 at mounting an external SCSI RaidSubSystem:
System: RedHat 9 (2.4.8-20smp)
Controller: Adaptec 39320A Dual Channel 64Bit
Termination:
Controller BIOS AutoTermination and aktive Termination on the single End at
the external RaidSubSystem
-------------schnipp---------------
(B2,I2,P0) -> 25
PCI->APIC IRQ transform: (B3,I9,P0) -> 16
PCI->APIC IRQ transform: (B3,I10,P0) -> 19
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: disabled - APM is not SMP safe.
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hda: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 402k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.6
<Adaptec 39320A Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.6
<Adaptec 39320A Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz,
512 SCBs
blk: queue f7c7bc18, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
(scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
(scsi1:A:1): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
Vendor: HITACHI Model: HUS157336EL3800 Rev: A5A5
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7c7ba18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HITACHI Model: HUS157336EL3800 Rev: A5A5
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7c7b618, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
scsi0:A:1:0: Tagged Queuing enabled. Depth 32
Vendor: DAS-315S Model: Volume Set # 00 Rev: R001
Type: Direct-Access ANSI SCSI revision: 03
blk: queue f7c7b818, I/O limit 4095Mb (mask 0xffffffff)
scsi1:A:1:0: Tagged Queuing enabled. Depth 32
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 1, lun 0
SCSI device sda: 72205440 512-byte hdwr sectors (36969 MB)
Partition check:
sda: sda1 sda2 sda3
SCSI device sdb: 72205440 512-byte hdwr sectors (36969 MB)
sdb: sdb1
SCSI device sdc: 3921870848 512-byte hdwr sectors (2007998 MB)
sdc: sdc1
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue f7c00c18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: M4 DATA Model: MagFile Rev: 3.07
Type: Medium Changer ANSI SCSI revision: 02
blk: queue f7c00a18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP Model: Ultrium 2-SCSI Rev: F45Z
Type: Sequential-Access ANSI SCSI revision: 03
blk: queue f7c00818, I/O limit 4095Mb (mask 0xffffffff)
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 156k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Adding Swap: 2040244k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x7 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 79 qinfifonext = 79
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 0 a7
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
(scsi1:A:1:0): BDR message in message buffer
scsi1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x22 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x34]:(P_DATAOUT_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 79 qinfifonext = 79
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 0 a7
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0) host_self_blocked
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
Recovery SCB completes
scsi1: Issued Channel A Bus Reset. 1 SCBs aborted
scsi1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x35 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x24]:(P_DATAOUT_DT|BSYI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 104 qinfifonext = 104
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0x4, SCB_NEXT == 0x3, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 c0 8d
STACK: 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
(scsi1:A:1:0): BDR message in message buffer
scsi1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x3b Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x34]:(P_DATAOUT_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0]
SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 104 qinfifonext = 104
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8265, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x1, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x3, SINDEX = 0x104, DINDEX = 0x104
scsi1: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 3 1 0 0 0 0
STACK: 0x24 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0) host_self_blocked
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
Recovery SCB completes
scsi1: Issued Channel A Bus Reset. 1 SCBs aborted
(scsi1:A:1:0): Unexpected busfree in Message-out phase, 1 SCBs
aborted, PRGMCNT == 0x1ae
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x1ac Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0xa0]:(P_MESGOUT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x40]:(NO_CDB_SENT)
SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0]:(HIPERR|HIZERO)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 105 qinfifonext = 105
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 3 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x4
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x107, DINDEX = 0x104
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 1 5f
STACK: 0x11b 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Transmission error detected
LQISTAT1[0x0] LASTPHASE[0xe0]:(P_MESGIN) SCSISIGI[0x60]:(P_DATAIN_DT)
PERRDIAG[0xd1]:(DTERR|PARITYERR|HIPERR|HIZERO)
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x1ad Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x76]:(P_DATAIN_DT|REQI|BSYI|ATNI)
SCSIPHASE[0x2]:(DATA_IN_PHASE)
SCSIBUS[0x0] LASTPHASE[0xe0]:(P_MESGIN) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x2]:(SPIORDY)
SSTAT1[0x19]:(REQINIT|BUSFREE|PHASEMIS) SSTAT2[0x0]
SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION)
DFSTATUS[0x88]:(HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x4]:(DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 0 1 5f
STACK: 0xd7 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Transmission error detected
LQISTAT1[0x0] LASTPHASE[0x60]:(P_DATAIN_DT)
SCSISIGI[0x60]:(P_DATAIN_DT)
PERRDIAG[0x11]:(DTERR|PARITYERR)
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x35 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x76]:(P_DATAIN_DT|REQI|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x4]:(SCSIPERR) SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0x11]:(DTERR|PARITYERR)
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 98 89
STACK: 0x204 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Transmission error detected
LQISTAT1[0x0] LASTPHASE[0x60]:(P_DATAIN_DT)
SCSISIGI[0x60]:(P_DATAIN_DT)
PERRDIAG[0x11]:(DTERR|PARITYERR)
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x35 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 98 89
STACK: 0x204 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
scsi1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x3b Mode 0x22
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x3, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0xff03, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB 3 1 0 0 0 0
STACK: 0x205 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0)
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
(scsi1:A:1:0): BDR message in message buffer
scsi1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x35 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0]
SAVED_MODE[0x11] DFFSTAT[0x19]:(CURRFIFO_1|FIFO0FREE)
SCSISIGI[0x74]:(P_DATAIN_DT|BSYI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x0] LASTPHASE[0x60]:(P_DATAIN_DT) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0x20]:(DPHASE) SEQ_FLAGS2[0x4]:(SELECTOUT_QFROZEN)
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xac]:(ENSCSIPERR|ENBUSFREE|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 5 CMDS_PENDING = 1 LASTSCB 0x4 CURRSCB 0x3 NEXTSCB 0xff00
qinstart = 106 qinfifonext = 106
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x17]
Total 1
Kernel Free SCB list: 4 2 1 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x8065, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0]
DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT =
0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DA
TA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x28]:(HDMAEN|SCSIEN)
DFSTATUS[0x80]:(PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x9a]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0xc]:(DLZERO|SHVALID) SHADDR = 0x037abb3c2,
SHCNT = 0xc3e
HADDR = 0x037abb000, HCNT = 0x1000 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
scsi1: REG0 == 0x4, SINDEX = 0x1a8, DINDEX = 0xa9
scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xffc7
CDB 28 0 0 80 98 89
STACK: 0x204 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi1: Host Status: Failed(0) host_self_blocked
DevQ(0:1:0): 0 waiting
(scsi1:A:1:0): SCB 0x3 - timed out
Recovery SCB completes
scsi1: Issued Channel A Bus Reset. 1 SCBs aborted
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,33), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20020805, bufsize 32768, wrt 30720, max init. bufs 4, s/g
segs 16
Attached scsi tape st0 at scsi2, channel 0, id 1, lun 0
-------------schnapp---------------
After this - it takes awhile - the device is ready but is it in a stable
status?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?HDEBIHPJPBCBMNIMFGFAOEOCCEAA.prosys>